How it Works
Shark
Loading...
CB-353007B
Operator's Manual
30 pgs2.13 Mb0

Shark CB-301007D, CB-402007A, CB-402007B, CB-402007C, CB-402007H Operator's Manual

...
CB
L
I
S
T
E
D
®
OPERATOR’S MANUAL
98012620-1
MODEL # ORDER #
CB-301007D 1.106-551.0 CB-402007A 1.106-552.0 CB-402007B 1.106-553.0 CB-402007C 1.106-554.0 CB-402007H 1.106-555.0
MODEL # ORDER # CB-353007A CB-353007B CB-353007C
CB-353007G 1.106-559.0 CB-353007H 1.106-560.0
To locate your local Shark Commercial Pressure Washer Dealer nearest you,
visit www.Sharkpw.com
9.801-262.0
CONTENTS
Model Number _____________________________ Serial Number ______________________________ Date of Purchase ___________________________
The model and serial numbers will be found on a decal attached to the pressure washer. You should record both serial number and date of purchase and keep in a safe place for future reference.
9.801-262.0 • Shark CB • Rev. 5/13
Important Safety Information 4-5 Component Identification 6 Assembly Instructions 7 Operating Instructions 8 Applying Detergent & General Operating Techniques 9 Shut Down & Clean-Up 10 Storage 10 Troubleshooting 11 Preventative Maintenance 12 Oil Change Record 12 Hose & Spray Gun Assembly & Parts List 13 Exploded View 14-15 Exploded View Parts List 16-17 VB8 Valve Exploded View and Parts List 18 Pump Exploded View and Parts List 19 Specifications Page 20-21 Multi-Room Installation Guide 22 KD Pump Exploded View and Parts List 23-24 KM Series Pump Exploded View and Parts List 25-26 VRT 3 Unloader Exploded View and Parts List 27 Warranty
3
INTRODUCTION & ImpORTaNT SafeTy INfORmaTION
WARNING
RISk Of explOSION:
flammable lIqUIDS.
WARNING
WARNING
Thank you for purchasing a Shark Pressure Washer. We reserve the right to make changes at any time without incurring any obligation.
Owner/User Responsibility:
The owner and/or user must have an understand­ing of the manufacturer’s operating instructions and warnings before using this pressure washer. Warning
PRESSURE WASHER
information should be emphasized and understood. If the operator is not fluent in English, the manufac­turer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents.
Owner and/or user must study and maintain for future reference the manufacturers’ instructions.
The operator must know how to stop the machine
OPERATOR’S MANUAL
quickly and understand the operation of all controls. Never permit anyone to operate the engine without proper instructions.
Sa ve TheSe INSTRUCTIONS
This manual should be considered a permanent part of the machine and should remain with it if machine is resold.
When ordering parts, please specify model and se­rial number . Use only identical replacement parts.
This machine is to be used only by trained operators.
ImpORTaNT SafeTy
INfORmaTION
WARNING: T o reduce the risk of
injury, read operating instruc­tions carefully before using.
1. Read the owner's manual thoroughly. Failure to follow instructions could cause
ReaD OpeRaTOR’S
maNUal ThOROUgh-
ly pRIOR TO USe.
2. Know how to stop the machine and bleed pressure quickly. Be thoroughly familiar with the controls.
3. Stay alert — watch what you are doing.
4. All installations must comply with local codes. Contact your electrician, plumber, utility compan y or the selling distributor for specific details. If your machine is rated 250 volts or less, single phase will be provided with a ground fault circuit inter­rupter (GFCI). If rated more than 250 volts, or
malfunction of the machine and result in death, serious bodily injury and/or proper ty damage.
more than single phase this product should only be connected to a power supply receptacle protected by a GFCI.
DANGER: Improper connection of the equip-
ment-grounding conductor can result in a risk of electrocution. Chec k with a qualified electri­cian or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product
- if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adaptor with this product
WARNING: Keep wand, hose, and
water spray away from electric wiring or fatal electric shock may result.
5. To protect the operator from
keep Wa TeR
SpRay aWay fROm
eleCTRICal WIRINg.
electrical shock, the machine must be electrically grounded. It is the responsibility of the
owner to connect this machine to a UL grounded receptacle of proper voltage and amperage ratings. Do not spray water on or near electrical components. Do not touch machine with wet hands or while standing in water. Always dis­connect power before servicing.
WARNING: Flammable liquids can create fumes which can ignite, causing property dam­age or severe injury.
WARNING: Risk of explosion — Do not spray flammable
DO NOT SpRay
liquids.
6. Do not allow acids, caustic or abrasive fluids to pass through the pump.
7. Never run pump dry or leave spray gun closed longer than 1-2 minutes.
8. Keep operating area clear of all persons.
WARNING: High pressure spray
can cause paint chips or other particles to become airborne and fly at high speeds. To avoid personal injury, eye, hand and foot safety devices must be
USe pROTeCTIve
eye WeaR
aND ClOThINg
WheN OpeRaTINg
ThIS eqUIpmeNT.
worn.
9. Eye, hand, and foot protection must be worn when using this equipment.
4
9.801-262.0 • Shark CB • Rev. 5/13
PRESSURE W ASHER
OPERATOR’S MANUAL
ImpORTaNT SafeTy INfORmaTION
WARNING
WARNING
WARNING
WARNING
WARNING: Grip cleaning wand securely with both hands before starting. Failure to do this could result in injury from a whipping wand.
WARNING: Be extremel y careful
when using a ladder , scaff olding or any other relatively unstable location. The cleaning area should have adequate slopes and drainage to reduce the pos-
TRIggeR gUN kICkS
baCk - hOlD WITh
bOTh haNDS
RISk Of INjURy
fROm fallS WheN
USINg laDDeR.
sibility of a fall due to slippery surfaces.
17. Do not overreach or stand on unstable support.
RISk Of INjeCTION OR SeveRe INjURy TO peRSONS. keep CleaR Of NOzzle.
WARNING: High pressure devel­oped by these machines will cause personal injury or equip­ment damage. Keep clear of nozzle. Use caution when oper­ating. Do not direct discharge stream at people, or severe in­jury or death will result.
Keep good footing and balance at all times.
18. Do not operate this machine when f atigued or under the influence of alcohol, prescription medications, or drugs.
Follow the maintenance instructions specified in the manual.
10. To reduce the risk of injury, close supervision is necessary when a machine is used near children. Do not allow children to operate the pressure washer. This machine must be attended during
operation.
11. Never make adjustments on machine while in operation.
12. Be certain all quick coupler fittings are secured before using pressure washer.
WARNING: Protect machine from
freezing.
13. To keep machine in best operating conditions, it is important you protect machine from freezing. F ailure to protect
pROTeCT fROm
fReezINg
machine from freezing could cause malfunction of the
machine and result in death, serious bodily injury, and/or property damage. Follow storage instructions specified in this manual.
14. Inlet water must be clean fresh water and no hotter then 185°F.
15. Manufacturer will not be liable for any changes made to our standard machines or any components not purchased from us.
16. The best insurance against an accident is precau­tion and knowledge of the machine.
5
9.801-262.0 • Shark CB • Rev. 5/13
COmpONeNT IDeNTIfICaTION
high pressure
Nozzle
PRESSURE WASHER
OPERATOR’S MANUAL
Water
Supply
garden hose
(not included)
quick
Coupler
garden hose Inlet
high pressure
hose
Soap Nozzle
On/Off Switch
Detergent
Injector
hose
Coupler
Detergent
pick-up T ube
Discharge
Nipple
Wand
Trigger
Spray
gun
Swivel
Connector
Detergent bucket
98012620-2
Detergent Injector - Allows you to siphon and mix detergents, when used with soap nozzle.
high pressure hose — Connect one end to water pump discharge nipple and the other end to spray gun.
Spray gun — Controls the application of water and detergent onto cleaning surface with trigger device. Includes safety latch.
Wand — Must be connected to the spray gun. Swivel Connector - Allows free range of movement
to avoid coiling hoses.
NOTe: If trigger on spray gun is released f or more than 2 minutes, water will leak from pump protec­tor valve. W arm water will discharge onto floor and cool water will allow the pump protector to seal.
(not included)
This system prevents internal pump damage.
6
9.801-262.0 • Shark CB • Rev. 5/13
PRESSURE W ASHER
OPERATOR’S MANUAL
aSSembly INSTRUCTIONS
Spray
gun
Nozzle
Safety
latch
high pressure
hose
98012620-3
STep 1: Attach the high pressure hose to the spray gun using teflon tape on hose threads. Use safety latch to prevent from opening.
Inlet
fitting
Outlet fitting
98012620-4
STep 2: Connect garden hose to the cold water source. Before installing nozzle, turn on water supply and run machine, allowing water to flush through the system until clear.
98012620-6
Coupler
98012620-5
STep 3: Insert nozzle into coupler. Release the coupler collar and push the nozzle until the collar clicks. Pull the nozzle to make sure it is seated properly.
STep 4: Connect the high pressure hose to the outlet discharge fitting. Push coupler collar f orw ard until secure. Connect the garden hose to pump water inlet. Inspect inlets. CAUTION: Do not run the pump without water
or pump damage will result.
7
9.801-262.0 • Shark CB • Rev. 5/13
9.801-262.0 • Shark CB • Rev. 5/13
OPERATOR’S MANUAL
PRESSURE WASHER
98012620-10
OpeRaTINg INSTRUCTIONS
Cold
Water
Source
garden
98012620-7
hose
STep 1: Connect garden hose to
the cold water source and turn water on completely . Never use hot water .
On/Off Switch
STep 4: Turn machine on by push-
ing switch at front of machine.
98012620-8
STep 2: Trigger the spray gun to eliminate trapped air then wait for a steady flow of water to emerge from the spray wand. Then install nozzle .
Safety
latch
98012620-11
WARNING! Never replace nozzles without engaging the safety latch on the spray gun trigger.
98012620-9
STep 3: Connect to appropriate power supply. Push GFCI reset button.
NOzzleS
98012620-12
The five color-coded quick connect nozzles provide a wide array of spray widths from 0° to 40° and are easily accessible when placed in the conve­nient rubber nozzle holder, which is provided on the front of the machine.
NOTe: F or a more gentle rinse, select the white 40° or green 25° nozzle . To scour the surface, select the yellow 15° or red 0° nozzle. To apply detergent select the black nozzle.
8
PRESSURE W ASHER
OPERATOR’S MANUAL
WARNING
DeTeRgeNTS aND geNeRal OpeRaTINg TeChNIqUeS
WARNING: Some detergents may be harmful if inhaled or ingested, causing severe nau­sea, fainting or poisoning. The harmful elements may cause property damage or severe injury.
STep 1: Use detergent designed specifically for pressure wash­ers. Household detergents could damage the pump. Prepare deter­gent solution as required by the manufacturer . Fill a container with pressure washer detergent. Place the filter end of detergent suction
98012620-13
tube into the detergent container.
98012620-14
STep 2: Apply safety latch to spray gun trigger. Secure black detergent nozzle into quick coupler . NOTe: Deter- gent cannot be applied using
98012620-15
the Y ellow nozzle.
STep 3: With the motor run­ning, pull trigger to operate machine. Liquid detergent is drawn into the machine and mixed with w ater . Apply detergent to work area. Do not allow detergent to dry on surface.
IMPORT ANT : Y ou must flush the detergent injection system after each use by placing the suction tube into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.
9.801-262.0 • Shark CB • Rev. 5/13
TheRmal pUmp pROTeCTION
If you run your pressure washer f or 2 min utes without pressing the trigger on the spray gun, circulating water in the pump can reach high temperatures. When the water reaches this temperature, the pump protector engages and cools the pump by discharging the warm water onto the ground. This thermal device prevents internal damage to the pump.
CleaNINg TIpS
Pre-rinse cleaning surface with fresh water. Place detergent suction tube directly into cleaning solution and apply to surface at low pressure (for best results, limit your work area to sections approximately 6’ square and always apply detergent from bottom to top). Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If surface appears to be drying, simply wet down surface with fresh water . If needed, use brush to remove stubborn dirt. Rinse at high pressure from top to bottom in an even s weeping motion keeping the spray nozzle appro ximately 1' from cleaning surface. Use ov erlapping strokes as you clean and rinse any surface. For best surf ace cleaning action spray at a slight angle.
Recommendations:
• Before cleaning any surface, an inconspicuous
area should be cleaned to test spray pattern and distance for maximum cleaning results.
• If painted surfacesare peeling or chipping,
use extreme caution as pressure washer may remove the loose paint from the surface.
• Keepthespraynozzleasafedistancefromthe
surface you plan to clean. High pressure wash a small area, then check the surface for dam­age. If no damage is found, continue to pressure washing.
CAUTION - Never use:
• Bleach,chlorineorothercorrosivechemicals  • Liquids containingsolvents (i.e., paint thinner,
gasoline, oils)
• Tri-sodiumphosphateproducts  • Ammoniaproducts  • Acid-basedproducts
These chemicals will harm the machine and will dam­age the surface being cleaned.
RINSINg
It will take a few seconds for the detergent to clear. Apply safety latch to spray gun. Remove black soap nozzle from the quick coupler. Select and install the desired high pressure nozzle. NOTe: Y ou can also stop detergent from flowing by simply removing detergent siphon tube from bottle.
9
Loading...
+ 21 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use