
CONTENTS
The model and serial numbers will be found on a decal at tached
to the pressure washer. You should record both serial number and
date of purchase and keep in a safe place for future ref er ence.
96-718, 97-721, 97-722, 97-723 • REV. 1/05
Applying Detergent and General Operating Techniques

96-718, 97-721, 97-722, 97-723 • REV. 1/05
PRESSURE WASHER
PRESSURE WASHER
OPERATOR’S MAN U AL
Avoid installing ma chines in
small areas or near ex haust
fans. Ex haust con tains poi-
son ous car bon mon ox ide gas;
con scious ness and may lead to
death. It also con tains chemicals known, in cer tain
quan ti ties, to cause can cer, birth de fects or oth er
Allow engine to cool for 2 minutes before re fu el ing. If
any fuel is spilled, make sure the area is dry be fore
test ing the spark plug or start ing the en gine. (Fire
and/or ex plo sion may oc cur if this is not done.)
When refueling gasoline engines on mo bile or
with the engine on the equip ment stopped;
with no source of ig ni tion within 10 feet of the
with an allowance made for ex pan sion of the
fuel should the equip ment be exposed to a
cau tions are nec es sary to en sure that the sit u a tion
pro duce can pierce skin and its
Thank you for purchasing a this pressure washer.
All in for ma tion in this man u al is based on the lat est
any time with out incurring any obligation.
This machine was designed for max i mum use
of 8 hours per day, 5 days per week.
The owner and/or user must have an un der stand ing of
the manufacturer’s operating instructions and warnings
should be emphasized and understood. If the op er a tor
and warnings shall be read to and dis cussed with
the op er a tor in the operator’s native lan guage by the
The operator must know how to stop the machine
quick ly and un der stand the operation of all controls.
This manual should be considered a permanent
When ordering parts, please specify model and
thor ough ly. Fail ure to fol low
func tion of machine and re sult
and/or prop er ty dam age.
All installations must com ply
with local codes. Con tact your elec tri cian, plumb er,
This machine has been pro vid ed with Warn ing and
these decals are removed or be come damaged
they should be re placed. Contact your dealer for
OPERATOR’S MANUAL
CAUTION
CAUTION

96-718, 97-721, 97-722, 97-723 • REV. 1/05
OPERATOR’S MAN U AL
slopes and drainage. This will reduce the pos si bil i ty
of a fall due to slippery surface.
The best in sur ance against an accident is pre-
cau tion and knowl edge of the ma chine.
spray gun closed long er than
er ate the pressure wash er at
par ti cles to become air borne and
son al in ju ry, eye safe ty de vic es
cause per son al in ju ry or equip ment dam age. Use
cau tion when op er at ing. Do not di rect dis charge
stream at peo ple, or se vere in ju ry or death will
of the pres sure washer when starting gas o line
When applying detergents, fol low the safety rules
on the de ter gent label.

96-718, 97-721, 97-722, 97-723 • REV. 1/05
PRESSURE WASHER
PRESSURE WASHER
OPERATOR’S MAN U AL
— Develops high pressure.
— Used for starting the engine man u al ly.
— Controls the application of water and
de ter gent onto cleaning surface with trigger device.
— Allows you to siphon and mix
— Must be connected to the spray gun.
— Connect one end to water
If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm
water will dis charge from pump protector onto oor.
This sys tem pre vents internal pump dam age.
OPERATOR’S MANUAL

96-718, 97-721, 97-722, 97-723 • REV. 1/05
OPERATOR’S MAN U AL

96-718, 97-721, 97-722, 97-723 • REV. 1/05
PRESSURE WASHER
PRESSURE WASHER
OPERATOR’S MAN U AL
Attach the high pres sure
Release the coupler col lar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
Connect the high pres sure
Pull the spring-load ed col-
lar of the wand coupler back to in sert
your choice of pres sure noz zle.
debris, then connect garden hose
pump dam age will result.
oil level in oil window (if equipped).
OPERATOR’S MANUAL

96-718, 97-721, 97-722, 97-723 • REV. 1/05
OPERATOR’S MAN U AL
Check engine oil level. Oil level should be level with the bottom
of the oil ller neck. Be sure the ma chine is level when checking the oil
Im prop er oil levels will cause low oil sensor to shut
as this will cause engine damage.
to the cold water source and turn
wa ter on completely. Never use
Rotate the fuel shut-off valve to the "On" po-
si tion. Slide the fuel valve lever to the "ON" position.
When the engine is not in use, leave the fuel valve in
steady ow of water to emerge from
lead ed gasoline. Do not use leaded
choke knob in). Push the choke knob to the "Closed"