Shark AZ1000 User Manual

Powered Lift-Away®

AZ1000

Series

INSTRUCTIONS

WITH

TECHNOLOGY

™

sharkclean.com

THANK YOU

for purchasing the Shark® APEX® DuoClean® Powered Lift-Away®

CONTENTS

TIP: You can ﬁnd the

model and serial numbers on the QR code label which is located on the back of your unit behind the dust cup.

registeryourshark.com

Scan QR code using mobile device

RECORD THIS INFORMATION

Model Number: ��

Serial Number: ��

Date of Purchase (Keep receipt): ��

Store of Purchase: ��

TECHNICAL SPECIFICATIONS

Voltage: 120V, 60Hz

Watts: 1350W

Amps: 11.3A

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE�

This instruction manual is designed to help you get a complete understanding of your new Shark APEX DuoClean Powered Lift-Away.

Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Getting to Know Your Shark® APEX Powered Lift-Away® � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5

Assembling Your Vacuum � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7

Nozzle Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

Cleaning the Brushroll � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9 Cleaning the Soft Roller � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �10 Checking the Nozzle for Blockages � � � � � � � � � � � � � � � � � � � � � � � �10

Using Your Vacuum in Upright Mode � � � � � � � � � � � � � � � � � � � � 11

What Does the Brushroll Indicator Light Mean? � � � � � � � � � � � � � 11

Using Your Vacuum in Above-Floor Mode � � � � � � � � � � � � � � � 13

Using And Storing Your Onboard Motorized Pet Tool � � � � � 14

Using Your Vacuum in Powered Lift-Away Mode � � � � � � � � � � 15

Powered Lift-Away Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �15 Lift-Away Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �16

Compatible Accessories � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17

Filter Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19

Emptying the Dust Cup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �19 Cleaning the Filters � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20

Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21

Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 24

DuoClean

If you have any questions, please go to sharkclean.com/customersupport for the latest FAQs, Troubleshooting Tips, and more.

1 2sharkclean.com

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other)� As a safety feature, this plug will ﬁt into a polarized outlet only one way� If the plug does not ﬁt fully into the outlet, reverse the plug� If it still does not ﬁt, contact a qualiﬁed electrician� DO NOT force into outlet or try to modify to ﬁt�

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

GENERAL WARNINGS

1. Your vacuum cleaner may consist of a motorized nozzle, wand, hose, and/or vacuum pod� This device contains electrical connections, electrical wiring, and moving parts that potentially present risk to the user�

2. Use only identical replacement parts�

3. Carefully observe and follow the instructions provided below to avoid improper use of the appliance� DO NOT use the vacuum for any purpose other than those described in this manual�

4. Before use, carefully inspect all parts for any damage� DO NOT use if any parts are damaged�

5. The use of an extension cord is NOT recommended�

6. This vacuum cleaner contains

no serviceable parts�

USE WARNINGS

7. DO NOT allow the appliance to be used by children� Close supervision is necessary when used near children� This is not a toy�

8. Always turn off the vacuum cleaner before connecting or disconnecting any motorized nozzles or other accessories�

9. DO NOT handle plug or vacuum cleaner with wet hands�

10. DO NOT use without filters in place�

11. Only use Shark® branded filters

and accessories� Failure to do so will also void the warranty�

12. DO NOT damage the power cord: a) DO NOT pull or carry vacuum

cleaner by the cord or use the cord as a handle�

b) DO NOT unplug by pulling

on cord� Grasp the plug, not the cord�

c) DO NOT run the vacuum cleaner

over the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces�

13. DO NOT put any objects into nozzle or accessory openings� DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow�

14. DO NOT use if nozzle or accessory airflow is restricted� If the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug from electrical outlet� Remove all obstructions before you plug in and turn on the unit again�

15. Keep nozzle and all vacuum openings away from hair, face, fingers, uncovered feet, or loose clothing�

16. DO NOT use if vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water�

17. Use extra care when cleaning on stairs�

18. DO NOT leave the vacuum cleaner unattended while plugged in�

19. When powered on, keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers�

20. DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables�

21. Your Shark® Vacuum may not be designed to stand up on its own� When taking a break from cleaning, you may need to lean it against furniture or a wall, or lay it flat on the floor� Using the vacuum for an application where the unit lacks stability may result in personal injury�

22. DO NOT use to pick up:

a) Liquids b) Large objects c) Hard or sharp objects

(glass, nails, screws, or coins)

d) Large quantities of dust (drywall

dust, fireplace ash, or embers)� DO NOT use as an attachment to power tools for dust collection�

e) Smoking or burning objects

(hot coals, cigarette butts, or matches)

f) Flammable or combustible

materials (lighter fluid, gasoline, or kerosene)

g) Toxic materials (chlorine bleach,

ammonia, or drain cleaner)

23. DO NOT use in the following areas: a) Poorly lit areas b) Wet or damp surfaces c) Outdoor areas d) Spaces that are enclosed

and may contain explosive or toxic fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)

24. Turn off all controls before plugging in or unplugging the vacuum�

25. Unplug from electrical outlet when not in use and before any maintenance or cleaning�

26. Hand wash with water only� Washing with cleaning chemicals could damage the unit�

27. During cleaning or routine maintenance, DO NOT cut anything other than hair, fibers, or string wrapped around the brushroll�

28. Allow all filters to air-dry completely before replacing in the vacuum to prevent liquid from being drawn into electric parts�

29. Make sure the dust cup and all filters are in place after routine maintenance�

30. If provided, secure the power cord around the two cord hooks during storage�

3 4sharkclean.com

GETTING TO KNOW YOUR SHARK® APEX® DUOCLEAN® POWERED LIFT-AWAY®

WELCOME!

Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will ﬁnd it all in here.

MAIN UNIT

A Power Switch

B Handle Release Button

C Surface Selector

D Hose Clip

E Hose

F Upper Cord Hook

G Powered Lift-Away Button

H Wand Release Button

I Lift-Away Pod

J Dust Cup Release Button

K Dust Cup Empty Latches

L Wand

M Lower Cord Hook

N Motorized Floor Nozzle

O Brushroll Indicator Light

P Headlights

Q Brushroll Garage

R Soft Roller

5 6sharkclean.com

ASSEMBLING YOUR VACUUM

TIP: Push hose clip

into back of wand for convenience.

TIP: For quick cord access, rotate upper hook down and remove cord.

STEP 1 STEP 2 STEP 3 STEP 4 STEP 5

TIP:

Use cord clip located on the side of wand to hold cord in place while vacuuming.

1 Place motorized ﬂoor

nozzle on ﬂoor and insert wand, pressing it in until it clicks securely into place.

7 8sharkclean.com

2 Place pod onto wand and

slide down to connect.

3 Insert handle into wand,

pressing it in until it clicks securely into place.

4 Connect hose into back of

pod, pressing it in until it clicks securely into place.

5 Store included accessories

on the accessory posts on the pod.

+ 10 hidden pages