SHAPE ISEEI-2.0CASE, ISEEI-2.0 User manual

Owner’s Manual

Interface Unit

Model N. ISEEI

Please read this instruction carefully before using this product, and save this manual for future use.

If you have any questions, visit www.shapewlb.comm call Free 1.888.968.9810 or 1.450.812.4712

THANK YOU FOR PURCHASING THE SHAPE® ISEEI GIMBAL

MOTORIZED GIMBAL STABILIZER GOPRO –SMARTPHONES

® introduces a new li ne of products, the ISEE series. The

SHAPE camera is balanced on a two axis gimbal and is stabilized on the tilt axis and on the roll axis using motors and sensors.

The stabilizing device is equipped with a joystick to manually control the camera movement and is powered by 2x LP-E6 rechargeable batteries.

CONTENTS

Read this first! ...............................................................................4

Handling the unit………………………………………………………6

What’s in the box………................................................................8

Components................................................................................10

Technical Specifications..............................................................12

Before using the Gimbal..............................................................14

Using the Gimbal with a Smartphone……………………….……..16

Warranty......................................................................................17

Notes…………………………………………………….……………19

READ THIS FIRST!

WARNING:

To reduce the risk of fire, keep this equipment away from all liquids. Use and store only in locations which are not exposed to the risk of dripping liquids, and do not plac e any liquid containers on top of the equipment.

WARNING: Always keep equipment out of reach of babies and small children.

WARNING: This unit is splash/rain resistant. NOT suitable for showering, swimming, snorkelling, water related work.

CAUTION:

Do not remove panel covers by unscrewing. Refer servicing to qualified service personnel.

CAUTION:

To reduce the risk of fire and interference, only use the recommended accessories.

CAUTION:

The high temperature parts of the device that are in direc t c ontact with the skin may aggravate low temperature burn injuries.

READ THIS FIRST! (continued)

FCC NOTICE (USA)

This device complies with part 15 of the F CC Rules. Operation is subject to the following two conditions: (1) This devic e may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or t elevision reception, which can be determined by turning the equipm ent off and on, the user is encouraged to try t o correct the interference by one or more of the following measures:

-Reorient or relocate the rec ei vin g ant e nna .

-Increase the separati on bet w ee n the e quipm ent and receiver.

-Connect the equipment into an outlet on a circuit differe nt from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV techni ci an f or hel p.

FCC WARNING:

To assure continued FCC emission limit compliance, follow the attached installation instructions and the user must use only shielded interface cables when connecting to host computer or peripheral devices. Also, any unauthorized changes or modifications to this equipment could void the us er’s authority to operate this device and void the warranty offered by the manufacturer.

HANDLING THE UNIT

The unit is not splash proof or dust proof.

• Be careful not to allow sand, dust, or water to adhere or enter into the controller box, and or connector.

• This unit is not waterproof, so it cannot be used underwater.

• Do not subject the unit to strong shocks or vibration. Doing so may result in malfunction or damage.

• Keep the unit away from insecticide sprays and ot her volatile substances.

• Do not leave the unit in contact with direct heat sources.

Please allow yourself at least 45 minut es to learn the operating limits of the device.

Under no circumstances should the unit be used or stored in any of the follow locations since doing so caused trouble in operat ion or malfunctioning.

• In direct sunlight or on a beach in summer

• In locations with high temperature and

humidity levels or where change in temperature and humidity are acute.

• Where there is fire

• Near heaters, air conditioners or humidifiers

• Where there is vibration

• Inside a vehicle

NOTE: SHAPE® will not be liable for any direct or indirect damage or lost resulting from operation or malfunction of this product. The design and specifications found in this document are subject to change without notice and may differ from the actual product. If the unit’s board stops due to a malfunction or error and you continue to operate the unit, the results may differ from the initial specifications.

+ 14 hidden pages