SHANY SSC-WD2201M User Manual

Full HD 1080P

HDCCTV Box Camera

SSC-WD2201M

Thanks for purchasing our product. Before operating the unit, please read the
instructions carefully and keep this manual for future reference.

130521-XE3312N-0862-V1.6-V1

i

Safety Warning

1. Read this manual carefully before installing the unit

Please read this manual first for correct installation and operation.

2. Never install the camera on a ceiling that cannot hold its weight

The product may fall down and cause damages.

3. Never install the camera near electric or magnetic fields

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio
speakers since the magnetic fields generate from above devices would distort the video image.

4. Never install or use the camera in areas exposed to water, oil or gas

The water, oil or gas may result in operation failure, electric shock or fire. Do not use this unit
near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet
basement, near a swimming pool, in an unprotected outdoor installation, or any area which is
classified as a wet location.

5. Never face the camera toward the sun

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

6. Power Cord Protection

Touching the wet power cord with hands or touching the power cord with wet hands may result in
electric shock. Power supply cords should be routed so that they are not likely to be walked on
or pinched by items placed upon or against them, playing particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the appliance.

7. Attachments

Do not use attachment not recommended by the product manufacturer as they may cause
hazards.

8. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of
any kind onto the product.

9. Do not operate the camera in environments where the temperature,
humidity or power source is beyond the specified ones

Use the camera in suitable environments where the temperature is within -10°C~50°C and
humidity below 80%. Use the input power source as this instruction indicated.

130521-XE3312N-0862-V1.6-V1

ii

10. Cleaning

Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.

11. Never disassemble the camera nor put impurities in it

Disassembly or impurities may result in trouble or fire.

12. Stop using when the product emits smoke or abnormal heat

13. Servicing

Do not attempt to repair this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

14. Retain Instructions

THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE RETAINED FOR FUTURE
REFERENCE.

NOTE:

The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without notice.

130521-XE3312N-0862-V1.6-V1

iii

Table of Contents

1. CAMERA ......................................................................................................................................................................... 1

1.1 FEATURE................................................................................................................................................................. 1

1.2 LIST OF CONTENTS .................................................................................................................................................. 1

1.3 DIMENSIONS............................................................................................................................................................ 1

1.4 SPECIFICATION........................................................................................................................................................ 2

1.5 CAMERA PARTS ....................................................................................................................................................... 3

2. CAMERA OSD ................................................................................................................................................................ 5

2.1 MAIN MENU .................................................................................................................................................................. 7

2.2 EXPOSURE ................................................................................................................................................................... 8

2.3 IMAGE .......................................................................................................................................................................... 9

2.4 WHITE PIXEL COMPENSATION...................................................................................................................................... 10

2.5 EFFECT .......................................................................................................................................................................11

2.6 PRIVACY MASK ........................................................................................................................................................... 12

2.7 FOG REDUCTION......................................................................................................................................................... 13

2.8 SYSTEM ..................................................................................................................................................................... 14

2.9 ANALOG OUT.............................................................................................................................................................. 15

2.10 DIGITAL OUT.......................................................................................................................................................... 16

2.11 COMMUNICATION................................................................................................................................................... 17

2.12 DEFAULT ............................................................................................................................................................... 18

130521-XE3312N-0862-V1.6-V1

1

1. CAMERA

1.1 Feature

 Full HD 1920x1080P@50/60fps (3G-SDI) Color Camera
 1/2.8" Sony 3.0 Megapixel Progressive Exmor™ CMOS Sensor
 Color:0.1Lux@F1.2, B/W:0.01Lux@F1.2, Sense-up:0.001Lux@F1.2
 Simultaneous Video Output: SDI / HDMI / Composite BNC
 OSD Menu Control
 OSD Control / by RS485 Remote Control / by Coaxial Control
 Fog Reduction & 2D Noise Reduction & Sense Up Functions
 Shutter Mode (AUTO / MANUAL)
 Mechanical IR Cut Filter (ICR)
 RS-485x1, DIx1, DOx1 / Option: PoC + Audio

1.2 List of Contents

 Camera Unit
 User manual

1.3 Dimensions

(Unit: mm)

56

62

67

120

130521-XE3312N-0862-V1.6-V1

2

1.4 Specification

Video System PAL / NTSC Selectable
Image Sensor 1/2.8" Sony 3.0 Megapixel Progressive ExmorTM CMOS Sensor
Resolution 1920(H)x1080(V)
Frame Rates 1920x1080P@50/60fps ; Adjustable to 1920x1080P@25/30fps,

1920x1080i@50/60fps
SDI Standards 3G-SDI (SMPTE 424M)
Minimum Illumination Color:0.1Lux@F1.2, B/W:0.01Lux@F1.2, Sense-up:0.001Lux@F1.2
Digital Wide Dynamic Range 512x Normal Camera (54dB)
Digital Video Output BNC connector (SDI) x1 / HDMI x1
Analog Video Output BNC connector (1.0Vp-p Composite, 75Ω) x1
Audio Option: Two-way Audio
Mechanical IR Cut Filter (ICR) Automatically Switches (Switching Lux Level Can Be Adjusted) / External
IR LED ; Working Distance Compatible with Infrared Illuminator
Menu OSD Control / by RS485 Remote Control / by Coaxial Control
Day&Night Mode COLOR / B&W / AUTO / EXTERNAL
Multi-Electronic Shutter Auto Shutter: Self Defined Auto Shutter Speed Range Programmable

Manual Shutter: 1/50(60), 1/100(120), 1/150(180), 1/200(240), 1/250, 1/300,

1/350, 1/400, 1/450, 1/500, 1/600, 1/750, 1/1,000, 1/2,000, 1/3,000, 1/4,000,

1/10,000 sec.
Automatic Gain Control 128 Levels (Adjustable Level Settings)
White Balance ATW / AWB / MANUAL / PUSH LOCK / 3200K / 6300K
WDR ; BLC WDR / BLC / OFF
Fog Reduction 16 Levels (0~15)
Flickerless PAL 50Hz / NTSC 60Hz / OFF
Dynamic Noise Reduction 2D
Sense Up ON (2~6X) / OFF
Language ENGLISH, JAPANESE, TRADITIONAL CHINESE, SIMPLIFIED CHINESE

(Option Not Changeable)
Image Setting SHARPNESS / CONTRAST / SATURATION / HUE / MIRROR
Privacy Zone Mask ON / OFF (16 Zones Programmable, Mosaic)
I/O Connector RS-485(Pelco-D/P)x1 / DIx1 / DOx1, Option:Audio In(3.5mm)x1 / Audio

Out(3.5mm)x1
Automatic IRIS ; Connector DC ; D4 IRIS Jack
Lens Mount CS / C mount (With Adaptor Ring)
Power Supply ; Consumption Standard: 12Vdc, Option: PoC (Power over Cable) ; 4.2W
Operation ; Storage Temp.

-10˚C~50˚C ; -20˚C~60˚C

Operation ; Storage Humidity Maximum: RH80% ; RH90%
Dimensions 67(W)×56(H)×120(L)mm
Weight 350g

Subject to change without notice.

130521-XE3312N-0862-V1.6-V1

3

1.5 Camera Parts

1. Overview

ཛ Lens Mount

This mount is used to install a CS-mount lens. CS-adaptor ring is required when using a C mount lens.

ཛྷ Camera Mounting Screw Holes

Screw holes for mounting the camera.

ཝ Mount Adaptor

The adaptor can be attached onto the top or the bottom of the unit.

ཞ Auto Iris Lens Connector (4-pin type)

The lens connector supplies the auto-iris lens (not supplied) with DC control signal.

ཟ OSD Control Buttons

ENTER button
UP & DOWN buttons
LEFT & RIGHT buttons

PIN NO. DC

1 CONTROL ­2 CONTROL +
3 DRIVE +
4 DRIVE -