SHANTOU Y37 Users manual

Y37-SP3144

Bluetooth speaker

Product specifications：

● Bluetooth :3.0+EDR

●

Support: L2CAP/A2DP
(AVCTP/AVDTP/AVRCP), can
receive AUDIO signal and control the
AUDIO device. support HSP/HFP
(Handsfree profile), Built-in Mic for
hands-free phone call

●

Working distance: 10M

●

SNR: ≥85db

●

Battery:3.7V 500mAh Mah

●

Normal volume playing time: 2H

●

Speaker driver : Ø 40 mm,

●

Power : 4Ω/3W

●

Frequency response:

●

Unit size：19.5mm*39mm*55mm

●

Unit weight：142g

●

Charging：5Ｖ/500mAh

Product Feature:
Product Feature:

1.

International advanced blue-

tooth chip and circuit design

120 Hz-18KHz

techniques, support all bluetooth
device ;

With FM function, can search

2.
radio station broadcast auto

matically.
With HI-FI speaker, to sure the

3.
clear and bright sound quality.

4.

Support TF Card,

5. Support AUX audio input,

connect bluetooth speaker
through output devices, for
example MP3,MP4,PSP,tablet pc,
mobile phone,etc.

Play music after pairing with

6.
bluetooth device for example
mobile/ MID/ TV, the working
distance is within 10M.

key & slot function:
key function:

1.

Power switch: off to close, on is
working

2.
Line in:it can play audio via AUX

3.

DC 5V charging slot

cable to audio device

4. Micro SD slot:it can decode
and play MP3 format audio when

put Micro SD card into the slot

5.

When play music , press short
for last song, press long to turn

down the volume.
When play music , press short

6.
for next song, press long to turn

up the volume.

7. Under bluetooth mode with

mobile paired , press short to
answer a call , press again to hand
up, press long to ring up a call.

When play music(USB card/

8.

TF card/LINE IN/ bluetooth),
press short for "play/pause ".press
long to switch USB/TF/FM /
bluetooth/line in. in FM mode,
press short to search station
automatically, press again to
stop searching.
NOTE:
Under FM mode, put in the
AUX cable to get bette

FCC NOTE：
This device complies with Part 15 of
the FCC Rules.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2)
this device must accept any
interference received, including
interference that may cause undesired
operation.

THE MANUFACTURER IS NOT
RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS
OR CHANGE TO THIS EQUIPMENT.
SUCH MODIFICATIONS OR
CHANGE COULD VOID THE USER’S
AUTHORITY TO OPERATE THE
EQUIPMENT.

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful
interference in a residential
installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:

-- Reorient or relocate the receiving
antenna.

-- Increase the separation between
the equipment and receiver.

-- Connect the equipment into an
outlet on a circuit different from that to
which the receiver is connected.

-- Consult the dealer or an
experienced radio/TV technician for
help.

RF:exposure statement
This equipment complies with FCC
radiation exposure limits set forth for
an uncontrolled environment .The
device has been evaluated to meet
general RF exposure requirement.
The device can be used in portable
exposure condition without
restriction.