SHANGHAI SUNRISE ELECTRONICS CO P6KE10, P6KE100C, P6KE100, P6KE10C, P6KE10CA Datasheet
...
SHANGHAI SUNRISE ELECTRONICS C
O
y
(
)
µ
)
u
(BR)
(BR)
-
N
P6KE6.8 THRU P6KE440CA
TRANSIENT VOLTAGE SUPPRESSOR
BREAKDOWN VOLTAGE:6.8-440V
PEAK PULSE POWER: 600W
TECHNICAL
SPECIFICATIO
FEATURES
DO-15
• 600W peak pulse power capability
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time:
typically less than 1.0ps from 0V to V
BR
for unidirectional and 5.0nS for bidirectional types.
• High temperature soldering guaranteed:
o
265
C/10S/9.5mm lead length at 5 lbs tension
MECHANICAL DATA
• Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
• Case: Molded with UL-94 Class V-O recognized
flame retardant epoxy
• Polarity: Color band denotes cathode except for
unidirectional types.
Dimensions in inches and (millimeters)
• Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25oC ambient temperature unless otherwise specified)
RATINGS
Peak power dissipation (Note 1) Pppm Minimum 600
Peak pulse reverse current (Note 1) Ippm See Table
Steady state power dissipation (Note 2) Pm(av) 2.0
Peak forward surge current (Note 3)
Maximum instantaneous forward voltage at 50A
for unidirectional onl
Operating junction and storage temperature range
Notes:
1. 10/1000
2. Tl=75
3. Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per min
4. VF=3.5V max. for devices of V
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.
2. For bidirectional use 'C' or 'CA' suffix for types P6KE6.8 thru types P6KE440A
(e.g. P6KE7.5C, P6KE440CA), for unidirectional don't use 'C' suffix after types.
3. For bidirectional devices having V
4. Electrical characteristics apply in both directions.
S waveform non-repetitive current pulse, and derated above Ta=25oC
o
C, lead length 9.5mm, Mounted on copper pad area of (20×20mm
Note 4
200V, and VF=5.0V max. for devices of V
of 10 volts and less, the ID limit is doubled.
WM
SYMBOL VALUE
T
I
FSM
V
STG
F
T
,
J
100
3.5/5.0
-55 to + 175
>200V
http://www.sse
DO-15
., LTD.
TECHNICAL
SPECIFICATION
Dimensions in inches and (millimeters)
UNITS
ute maximum.
W
A
W
A
V
o
C
diode.com
Loading...