SHANGHAI SUNRISE ELECTRONICS 5KP90CA, 5KP90C, 5KP90A, 5KP90, 5KP85C Datasheet

...

SHANGHAI SUNRISE ELECTRONICS CO., LTD.

)

5KP5.0 THRU 5KP110CA

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE:50-110V

PEAK PULSE POWER: 5000W

TECHNICAL

SPECIFICATION

FEATURES

R - 6

• 5000W peak pulse power capability

• Excellent clamping capability

• Low incremental surge resistance

• Fast response time: typically less than 1.0ps from 0V to V

for unidirectional and 5.0nS for bidirectional types.

• High temperature soldering guaranteed:

265

C/10S/9.5mm lead length at 5 lbs tension

MECHANICAL DATA

• Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C

• Case: Molded with UL-94 Class V-O recognized flame retardant epoxy

• Polarity: Color band denotes cathode except for unidirectional types.

Dimensions in inches and (millimeters)

• Mounting position: Any

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

(Ratings at 25oC ambient temperature unless otherwise specified)

RATINGS

Peak power dissipation (Note 1) Pppm Minimum 5000 W Peak pulse reverse current (Note 1) Ippm See Table A Steady state power dissipation (Note 2) Pm(av) 8.0 W Peak forward surge current (Note 3) Maximum instantaneous forward voltage at 100A Operating junction and storage temperature range

Notes:

1. 10/1000

2. Tl=75

3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.

DEVICES FOR BIDIRECTIONAL APPLICATIONS

1. Suffix 'A' dnotes 5% tolerance device,no suffix 'A' dnotes 10% tolerance device.

2. For bidirectional use 'C' or 'CA' suffix for types 5KP5.0 thru types 5KP110A (e.g. 5KP7.5C,5KP110CA), for unidirectional don't use 'C' suffix after types.

3. For bidirectional devices having V

4. Electrical characteristics apply in both directions.

S waveform non-repetitive current pulse, and derated above Ta=25oC

C, lead length 9.5mm, Mounted on copper pad area of (20×20mm

of 10 volts and less, the ID limit is doubled.

SYMBOL VALUE UNITS

FSM

STG,TJ

400 A

3.5 V

-55 to + 175

http://www.sse-diode.com

ELECTRICAL CHARACTERISTICS]

(

)

Device Type

5KP5.0 5KP5.0A 5KP6.0 5KP6.0A 5KP6.5 5KP6.5A 5KP7.0 5KP7.0A 5KP7.5 5KP7.5A 5KP8.0 5KP8.0A 5KP8.5 5KP8.5A 5KP9.0 5KP9.0A 5KP10 5KP10A 5KP11 5KP11A 5KP12 5KP12A 5KP13 5KP13A 5KP14 5KP14A 5KP15 5KP15A 5KP16 5KP16A 5KP17 5KP17A 5KP18 5KP18A 5KP20 5KP20A 5KP22 5KP22A 5KP24 5KP24A 5KP26 5KP26A 5KP28 5KP28A 5KP30 5KP30A

at T

Breakdown

Voltage

(Volts)

(BR)

(NOTE 1)

MIN MAX

6.40 7.30 50 5.0 5000 520 9.6 0.057

6.40 7.00 50 5.0 5000 543 9.2 0.057

6.67 8.15 50 6.0 5000 439 11.4 0.061

6.67 7.37 50 6.0 5000 485 10.3 0.061

7.22 8.82 50 6.5 2000 407 12.3 0.065

7.22 7.98 50 6.5 2000 447 11.2 0.065

7.78 9.51 50 7.0 1000 378 13.3 0.068

7.78 8.60 50 7.0 1000 417 12.0 0.068

8.33 10.2 5.0 7.5 250 350 14.3 0.073

8.33 9.21 5.0 7.5 250 388 12.9 0.073

8.89 10.9 5.0 8.0 150 333 15.0 0.075

8.89 9.83 5.0 8.0 150 367 13.6 0.075

9.44 11.5 5.0 8.5 50.0 314 15.9 0.078

9.44 10.4 5.0 8.5 50.0 347 14.4 0.078

10.0 12.2 5.0 9.0 20.0 295 16.9 0.081

10.0 11.1 5.0 9.0 20.0 325 15.4 0.081

11.1 13.6 5.0 10.0 15.0 266 18.8 0.084

11.1 12.3 5.0 10.0 15.0 294 17.0 0.084

12.2 14.9 5.0 11.0 10.0 249 20.1 0.086

12.2 13.5 5.0 11.0 10.0 274 18.2 0.086

13.3 16.3 5.0 12.0 10.0 227 22.0 0.088

13.3 14.7 5.0 12.0 10.0 251 19.9 0.088

14.4 17.6 5.0 13.0 10.0 210 23.8 0.090

14.4 15.9 5.0 13.0 10.0 232 21.5 0.090

15.6 19.1 5.0 14.0 10.0 194 25.8 0.092

15.6 17.2 5.0 14.0 10.0 215 23.2 0.092

16.7 20.4 5.0 15.0 10.0 188 26.9 0.094

16.7 18.5 5.0 15.0 10.0 206 24.4 0.094

17.8 21.8 5.0 16.0 10.0 176 28.8 0.096

17.8 19.7 5.0 16.0 10.0 176 26.0 0.096

18.9 23.1 5.0 17.0 10.0 164 30.5 0.097

18.9 20.9 5.0 17.0 10.0 161 27.6 0.097

20.0 24.4 5.0 18.0 10.0 155 32.2 0.098

20.0 22.1 5.0 18.0 10.0 172 29.2 0.098

22.2 27.1 5.0 20.0 10.0 139 35.8 0.099

22.2 24.5 5.0 20.0 10.0 154 32.4 0.099

24.4 29.8 5.0 22.0 10.0 127 39.4 0.100

24.4 26.9 5.0 22.0 10.0 141 35.5 0.100

26.7 32.6 5.0 24.0 10.0 116 43.0 0.101

26.7 29.5 5.0 24.0 10.0 128 38.9 0.101

28.9 35.3 5.0 26.0 10.0 107 46.6 0.101

28.9 31.9 5.0 26.0 10.0 119 42.1 0.101

31.1 38.0 5.0 28.0 10.0 99 50.1 0.102

31.1 34.4 5.0 28.0 10.0 110 45.4 0.102

33.3 40.7 5.0 30.0 10.0 93 53.5 0.103

33.3 36.8 5.0 30.0 10.0 103 48.4 0.103

=25oC unless otherwise noted

Test

Current

(mA)

Stand-off

Voltage

(Volts)

Maximum

Reverse

Leakage at

ID (µA)

(NOTE 3)

Maximum

Peak Pulse

Reverse

Current

Ippm(Amps)

(NOTE 2)

Maximum Clamping

Voltage at

Ippm

(Volts)

Maximum

Temperature

Coefficient

of V

(BR)

(%/oC)

http://www.sse-diode.com

+ 1 hidden pages