Shakespeare marine 5120 User Manual

Thank you for purchasing a Shakespeare antenna product.

Shakespeare works hard to build reliability and durability into all

of its products for maximum customer satisfaction. Customer

comments are welcome. Before installing, please study the

diagram and check parts supplied against those listed.

IMPORTANT! Please read all instructions before installing.

Centennial® Style 5120

Supplied Parts

1 Antenna assembly

The Style 5120 is a Centennial® Series, AM/FM antenna of 8’

overall length with a chrome plated brass ferrule and 15’ cable with

Motorola type plug attached.

Tools required:

None

Installation Instructions

Choose a mounting location that is as high as possible, as free

as possible from obstructions, and as far as possible from other

antennas.

1. Mount the antenna using a Shakespeare Style 4187 Ratchet

Mount (sold separately). Follow the directions included with

the mount you choose.

2. Do not cut the cable. Route the cable to your AM/FM receiver

and plug the Motorola type plug into the antenna jack. Coil any

excess cable in an out-of-the-way place. The cable can be

lengthened with a Style 4352 AM/FM 10’ extension cable kit

(sold separately).

WARNING: Do not let paint solvents,
cleaning solvents, or adhesive
caulking come in contact with the
antenna. Chemicals in these
materials might destroy the finish.

Antenna

Cleaning instructions

To clean the antenna, use mild dishwashing liquid (one that is

not harsh to the hands and without ammonia) in lukewarm water.

Tech Tip: This antenna will read “open circuit” when
tested with an ohm meter or continuity tester.

Shakespeare Company · Electronic Products Group

3801 Westmore Dr., Columbia, SC 29223 · 803-227-1590 · Fax: [phone] · www.shakespeare-marine.com

©2003 Shakespeare Co. · Form I-5120 J: rev. 04/02/2006

Chrome-plated
brass ferrule

Cable

35-90-1193-00