Shakespeare Electronic SE 2510 User Manual
Specifications and Main Features
- Model: SE2510 Marine VHF Radio
- Power Output: 25W/1W switchable
- Modulation: 16F3 for 100%
- Frequency Range: 156.025Mhz - 157.425 MHz@ 25 KHz channel spacing, 55 channels in total
- Number of Channels: 120 in total (55 USA, 55 INT’L, 10 Wx)
- Waterproof: Meets Coast Guard CFR-46 requirements for Waterproof Testing Standards
- Operating Temperature: -20 to +50 Degree Centigrade
- Construction: Sturdy Plastic Front and Cast Aluminum Back Housing
- Speaker: Polyphonic Water Resistant Sealed
- Physical dimension: 5.6 x 2.2 x 4.9 in
- Mass: 2 pounds
- Display: wide size LCD with illuminating backlight
- Pads: Silicon Rubber with distinct Tactile-feel push switches
- Squelch Adjustment: Manual click knob
- Volume Adjustment: Manual knob
- Frequency Control Technique: Phased Locked Loop (PLL)
- Input Voltage/Current: 13.8 VDC 5.5Amps @25W & 1.3 Amps @ 1 W
- Reverse Polarity Protection: Series Diode protection
- In-line Fuse: 10amps
- Antenna Resistance: 50 Ω
- Frequency Drift: +/-10 PPM at both transmitter and receiver
- Unique Features: MRU Memory Channel,16/09 Priority Channel, Wx Alert, Memory Scan, All Scan, Dual Watch
- Warranty Period: 3 years
- Power of Audio Output: Less than 10 percent distortion at 3W rating with 4 ohm audio impedance
- Internal Speaker Feature: Yes, does support external speaker
Frequently Asked Questions
- Q: The maximum power output of SE2510 in watts?
A: A maximum of 25 watts is the output of SE2510 while 1 watt is also selectable.
- Q: Is seawater immersion or heavy rainfall a problem for SE2510?
A: Coast Guard CFR-46 waterproofing testing standard has been passed by SE 2510.
- Q: How Many Channels does SE2510 work with?
A: 120 channels in total are supported by 2510 (55 for US, 55 for international, and 10 for weather).
- Q: For how long can temperature be under e150C and above e50C for safe use?
A: Minimum of – 20 degrees C to Maximum of +50 degrees C.
- Q: Is there outer speaker which is connected through SE2510?
A: External Speaker to other SE2510 can be connected.
- Q: How do I clear all frequencies from the memory Wavecom SE2510?
A: Since there is no direct command to clear all frequencies from the memory, you will have to do the following in order to achieve this command: While turning on the power, keep pressing the [16/9] key. This will remove all the channels as it will reset the SE2510 to its default settings.
- Q: What VDC is required by SE2510?
A: An operational voltage of 13.8 is required for SE2510 to work.
User Manual
Loading...