Shadow Creator SC HANDLE User Manual

Instruction manual of Shadow Controller

Shadow Controller’sappearance

Shadow Controller’s Perihperals

1:TouchPanel and Key Under TouchPanel named TPkey
2：Back Key
3：Function Key
4：Indicator light
5：volume Down and Up Key
6：Trigger Key
7：6Doftracklight

1 / 3

Introduce the function of Shadow Controller’s Perihperals

1: TouchPanel support move up and down event,this function use for zoom in or out the window Size(you need click the
button of zoom window first)
2:Back Key: use for return to upper level or Quit the application
3:Function Key: wake the handler device when push the key over 1 second；reset the posture of the handler device in
theconnected AR devicewhen push the key over 2second
4：Indicator light：

blue light flicker mean the handler don’t connect to the AR device
green light mean the handler had connect to the AR device

red light flicker while happen when the battery level low or when the handler Coming to shutdown
5:volume Down and Up Key : adjust the connect AR device’s volume
6：trigger key: send the enter key event to the connect AR device
7: 6 Dof track light : use for calculate the 6dof gesture，the light used by the application ,so User do not need to manage

Shadow Controller’s Combination key：

1：push back and TPkey key both: the handler will disconnect with the AR deivce ,and shutdown after it;
2: push back ,Tpkey,and Function key at the same time the handler will shutdown after 3 seconds
3： push back and function Key both when the device sleep ,at the point of red light flicker ,then put down the handler
stillness at the plane,this will calibratethe gyro’s datas

Shadow Controller’s common problem

1: when you found the gesture of the handler slow changed in the AR device
this reason is the gyro’s datas don’t calibrate,at this time use the thirdCombination Key，turn off the handler ,then push the
back and function key until the red light flicker,put down the handler device to the plane
2: when you found the gesture of the handler not forward
at this time ,you need hold the AR device forward of you,then push the function key 2 seconds
3: Force shutdown the handler device
at this time ,you only need to push back ,TPkey and function key at the same time,after 3 seconds ,the handler device will
shutdown

2 / 3