Mixed Reality HDM
USER GUIDE
Action One A01
Shadow Creator
Manufacture:Shadow Creator Information Technology Co., Ltd.
Action One A01 Starts Smart Life
Action One A01 will change the way you communicate, create, collaborate, and explore. Open it and enjoy your smart life.Before that, please read the instructions carefully and set up
your device.
1
Here’s a rundown of Action One’s
Accessories.
2
Action One
USB-C Cable
Power Supply
Controller
Microfiber Cloth
3
4
Safe and Comfort
Use it in a safe environment
Please use Action One in a safe space without barriers.
Please don’t use Action One while driving or doing other unsafe things.
Staying comfortable
Please take a few more breaks during the first use of Action One.
If you feel uncomfortable, such as dizziness, motion sickness,
nausea, confusion, headache, eyestrain, please stop using it
immediately.
5
Audio Jack
Adjustment Wheel
USB-C Cable
6
Volume-
Volume＋
7
Power Button
Turn Action One On or Off
Press the power button and hold for 5 seconds to turn on
your Action One when it's off.
To turn off Action One , long press the power button for 2-4 seconds.
9
WEARING
Please wear the headset following the instructions below.
Don't take off your glasses because Action One doesn't
support focus adjustment.
10
1
11
12213
3
Touchpad
ReturnButton
Indicator Light
Power Button
14
Controller
The controller gives you another way to interact with holograms.
In 3D mode, the controller will be used as air mouse.
15
Select and Confirm
To select a hologram, button or other elements,
please aim the pointer at it and press the touchpad.
16
How to edit windows？
Align the status bar above the window and long press
VOL+ or touchpad to drag it to any position.
Through the small icons in the status bar, the window
can be zoomed in or out, fixed in full-screen mode, cl-
osed and so on.
18
19
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2) this device must accept any interference
received,including interference that may cause undesired operation.
CAUTION
Any changes or modifications not expressly approved by the grantee of this device could void the
user’s authority to operate the equipment.
RF exposure warning:
1 The equipment complies with RF exposure limits set forthset forth for an uncontrolled environment.
2 The equipment must not be co-located or operating in conjunction with any oyher antenna or tran smitter.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Mixed Reality HDM meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all
persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device
types: Mixed Reality HDM (FCC ID:2AQYUACTIONONE-A1) has also been tested
against this SAR limit. The highest SAR value reported under this standard during
product certification for use at the head is 0.306W/kg, This device was tested for head
operations with the edge of the helmet kept 0mm from the head. To maintain compliance
with FCC RF exposure requirements, use accessories that maintain a 0mm separation
distance between the head and the edge of the helmet.
Loading...