Shadow SV1 User manual

Montageanleitung für Shadow SH SV1
Violin-Transducer

Inhalt:Inhalt:

transducer disc (12mm diameter)

transducer disc (12mm diameter)
output socket (6,3mm) with Velcro

output socket (6,3mm) with Velcro
copper foil

copper foil

1. Test fit sensor into the slot between the wing and foot. Pickup should fit tightly for best output (see Fig. 1). Pickup can

1. Test fit sensor into the slot between the wing and foot. Pickup should fit tightly for best output (see Fig. 1). Pickup can
also be mounted between the bridge feet and body (see Fig. 2).

also be mounted between the bridge feet and body (see Fig. 2).

Fig. 1Fig. 1 Fig. 2Fig. 2

Sensor

Sensor

Installation into the slot between the wing and the foot.

Installation into the slot between the wing and the foot.
If pickup is too loose, shim with included shim material (see Fig. 2). If pickup is too tight, file the bridge slot slightly.

If pickup is too loose, shim with included shim material (see Fig. 2). If pickup is too tight, file the bridge slot slightly.

Copper Foil

Fig. 3Fig. 3

2. Install the sensors into the bridge slot.

2. Install the sensors into the bridge slot.

3. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive.

3. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive.

Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we

recommend an amplifier with low impedance input.