®
ST16R820
Smar tcard MCU
With 544 Bytes EEPROM for Contactless/Contact Applications
DATA BRIEFING
■
8 BIT ARCHITECTURE CPU
■
8 KBytes of USER ROM, SECTOR
COMBINATIVE
■
4.5 KBytes of SYSTEM ROM
■
192 Bytes of RAM
■
544 Bytes of EEPROM, SECTOR
COMBINATIVE
– Highly reliable CMOS EEPROM technology
– 10 y ear data retention
– 300,000 Erase/Write cycle endurance
– Protected One Time Programmable block (32
or 64 bytes)
– 1 to 32 bytes block either Erase or Write in
single cycle programming
■
POWER SAVING STANDBY MODE
■
VERY HIGH SECURITY FEATURES
INCLUDING EEPROM FLASH ERASE
■
ESD PROTECTION GREATER THAN 5000V
■
2 OPE RATING CO NFIGURA T IONS
–ISSUER
– USER
Micromodule (D5)
Wafer
CONTACTLESS SPECIFIC FEATURES
■
13.56 MHZ OPERATION
■
106 KBIT/S DATA TRANSFER
■
AMPLITUDE MODULATION READER TO
CARD
■
LOAD MODULATION CARD TO READER
■
3V OPERATION
CONTACT SPECIFIC FEATURES
■
EXTENDED VOLTAGE OPERATION, Vcc
Range: 2.7V to 5.5V
■
SERIAL ACCESS, ISO 7816-3 COMPATIBLE
■
UP TO 5 MHz I N TERNAL OP E RATING
FREQUENCY
■
CONTACT ASSIGNMENT COMPATIBLE ISO
7816-2
BD.R820/9809VP1
This is Brief Data from STMicroelectronics. Details are subject to change without notice. For complete data, please contact
your nearest Sales Office or SmartCard Products Divison, Rousset, France. Fax: (+33) 4 42 25 87 29
1/2
1
ST16R820
DESCRIPTION
The ST16R820, a member of the standard ST16
device family, is a serial access microcontroller
especially designed for large volume contactless/
contact Smartcard applications.
The ST16R820 is based on 8 bit CPU core and includes on chip memories: 192 Bytes of RAM, 8
KBytes of USER ROM, 4.5 KBytes of SYSTEM
ROM, and 544 Bytes of EEPROM.
Both ROM and EEPROM memorie s can be configured into two sectors. Access rules from any
Figure 1 Block D ia gram
memory section or sector to any other are set-up
by the User’s defined Memory Access Control Matrix (M ACM) .
Reliability da ta related to the ST16 R820 product,
manufactured using STMicroelectronics’ advanced CMOS EEPROM technology, confirm
data retention of up to 10 years and endurance up
to 300,000 Erase/Write cycles.
Contact operation is fully compatible with the ISO
standards for Smartcard applications.
8 BIT
CPU
CLK
SERIAL I/0
INTERFACE
I/O1
RAM
192 Bytes
RF INTERFACE
SYSTEM
KBytes
SECT.
AC0AC1
ROM
S
V GENERATION
ROM
8 KBytes4.5
SECTORS
COMBIN.
SECT. ASECT.
B
MEMORY ACCESS CONTROL MATRIX
INTERNAL BUS
NUMBER
GENERATOR
SECTOR
CC
EEPROM
544 Bytes
SECTORS COMBINATIVE
A
SECURITY
LOGIC
SECTOR
B
RST
V
CC
GND
SCP 076c/DS
2/2