SGS Thomson Microelectronics HCF4522B Datasheet

PROGRAMMABLE BCD DIVIDER-BY-N COUNTER
.VERYLOWQUIESCENTCURRENT
.SUPPLYVOLTAGERANGE3V TO 18V
.INTERNALLYSYNCHRONOUS FOR HIGH IN-
TERNALAND EXTERNAL SPEEDS
.5.0MHz COUNTING RATE
.INCREMENTED ON POSITIVE TRANSITION
OF CLOCK OR NEGATIVE TRANSITION OF CLOCKINHIBIT
.ASYNCHRONOUSPRESETENABLE
EY
(Plastic Package)
HCC4 52 2B
HCF4522B
PRODUCT PRE VIEW
F
(Ceramic Frit SealPackage)
DESCRI PTION
The HCC4522B and HCF4522B are monolithic in­tegrated circuits, available in 16-lead dual-in-line plasticor ceramicpackagesand plasticmicropack­ages.
The HCC4522B and HCF4522B are programm­able,BCD down counters with a decoded ”0” state output for divide-by-N applications. The counters arecascadable. In single stage applications the ”0” output is applied to the Preset Enable input. The cascadefeedback input allowscascade divide-by-N operation with no additional gates required. The clock Inhibit input allows disabling of the pulse counting function.
M1
(Micro Package)
ORDER CODES :
HCC 4522 BF HCF4522 BM1 HCF4522 BEY HCF4522 BC1
PIN CO NNE C TIO N (t op v iew)
(Plastic Chip Carrier)
C1
Applications for these programmable divide-by-N counters include frequency synthesizers, phase­locked loops and other frequency dividing circuits where low power and/or high noise immunity is re­quired.
September 1990
1/6
Plastic DIP16 (0.25) MECHANICAL DATA
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
a1 0.51 0.020
B 0.77 1.65 0.030 0.065
b 0.5 0.020
b1 0.25 0.010
D 20 0.787 E 8.5 0.335
e 2.54 0.100
e3 17.78 0.700
F 7.1 0.280
I 5.1 0.201
L 3.3 0.130
Z 1.27 0.050
mm inch
2/6
P001C
Ceramic DIP16/1 MECHANICAL DATA
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 20 0.787 B 7 0.276 D 3.3 0.130 E 0.38 0.015
e3 17.78 0.700
F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060
L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N 10.3 0.406
P 7.8 8.05 0.307 0.317
Q 5.08 0.200
mm inch
P053D
3/6
SO16 (Narrow) MECHANICAL DATA
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 1.75 0.068 a1 0.1 0.2 0.004 0.007 a2 1.65 0.064
b 0.35 0.46 0.013 0.018
b1 0.19 0.25 0.007 0.010
C 0.5 0.019
c1 45° (typ.)
D 9.8 10 0.385 0.393
E 5.8 6.2 0.228 0.244
e 1.27 0.050
e3 8.89 0.350
F 3.8 4.0 0.149 0.157
G 4.6 5.3 0.181 0.208
L 0.5 1.27 0.019 0.050
M 0.62 0.024
S8°(max.)
mm inch
4/6
P013H
PLCC20 MECHANICAL DATA
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 9.78 10.03 0.385 0.395
B 8.89 9.04 0.350 0.356
D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022
E 7.37 8.38 0.290 0.330
e 1.27 0.050
e3 5.08 0.200
F 0.38 0.015 G 0.101 0.004 M 1.27 0.050
M1 1.14 0.045
mm inch
P027A
5/6
Information furnished is believed to be accurate and reliable.However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information norfor any infringement ofpatents or other rights of thirdparties which mayresults from itsuse. No license isgrantedby implication or otherwise underany patent orpatent rightsofSGS-THOMSON Microelectronics.Specificationsmentioned in this publicationare subject to change without notice. Thispublication supersedes andreplaces allinformation previously supplied. SGS-THOMSON Microelectronicsproductsare notauthorizedforuse ascritical componentsin lifesupportdevices orsystemswithoutexpress written approvalof SGS-THOMSONMicroelectonics.
1994 SGS-THOMSON Microelectronics - All Rights Reserved
6/6
Australia - Brazil - France- Germany - HongKong - Italy- Japan - Korea - Malaysia - Malta - Morocco- The Netherlands-
SGS-THOMSON Microelectronics GROUPOF COMPANIES
Singapore -Spain - Sweden- Switzerland -Taiwan - Thailand - UnitedKingdom - U.S.A
Loading...