SGS Thomson Microelectronics GS-GHIBLI Datasheet
FEATURES
LINE VOLTAGE 90 - 264 VAC
SINGLE OUTPUT MAX 8W
DESIGNED FOR ON LINE CHARGING OF
MOBILE PHONES
EMC COMPLIANCE ACCORDING TO EU
AND US DIRECTIVES
SAFETY APPROVAL ACCORDING TO
EN60950
CE AND UL MARKED. AUSTRALIA, UK,
SOUTH AFRICA AND CHINA MARKING
UPON REQUEST
OUTPUT CURRENT AND VOLTAGE LEVELS
ACCORDING TO CUSTOMER REQUIREMENTS
OUTPUT VOLTAGE PRECISI O N: +/- 5%
OUTPUT CURRENT PRECISION : +/- 8%
OUTPUT RIPPLE VOLTAGE <100 mVpp
INPUT FUSE PROTECTION
OUTPUT SHORT CIRCUIT PROTECTION
RG11 OUTPUT CONNECTOR ONLY WITH
EURO PLUG.
2-WIRES DC CORD WITH STRAIN RELIEF
TERMINATED WITH ANY CUSTOM CONNECTOR AVAILABLE UPON REQUEST. A
VARIETY OF PLUGS CAN BE ASSEMBLED
ON THIS VERSION.
LOW STAND BY PO W ER
DESCRIPTION
The Fast Charger GHIBLI has been designed for
charging all types of batteries, including NiMH,
NiCd and Li-Ion batteries in hand held mobile
phones. GHIBLI is a high performance high efficiency AC/DC switching mode constant v oltage &
current generator. The output voltage and current
levels are set up by design in accordance with
customer requirements.
Typical reference values in this data sheet are
10V, 800 mA with the input Vac ranging from 9 0
to 264 Vrms.
January 2000
®
PRODUCT VIEW
(Ghibli Housing with RG11)
ORDERING NUMBER: GSAC-xxCCCy
GHIBLI
AC/DC UNIVERSAL FAST CHARGER
Rev. 01
Plug Type: Part Number:
EURO GSAC-xxCCC1
xx = Output Current level (2 Digits)
CCC= Customer Identifier (3 Digits)
y = plug type
1/4
Coming into the small Ghibli housing, this fast
charger is equipped with the E uropean AC plug.
Interface to the phone is ensured via a RG11
connector. However, the same electronic platform
can be assembled upon customer request into
the Robin housing. The Robin housing can be assembled with a variety of AC plug (UK, US, Australia, South Africa/India,and China), interface to
the phone is ensured via a 2 wires cord with
strain relief, terminated with customer specified
connector. Typical weight is 70 grams only, without cable.
AGENCY Approvals
The charger is certified by competent agencies to
comply with most popular safety and EMC requirements, including but not limited to:
EN60950
UL1950
ETS300-342-1
FCC part 15 (specific version upon request)
ELECTRICAL CHARACTERISTICS
(Tamb=25
o
C, unless otherwise specified.)
Symbol Parameter Test Condition Min. Typ. Max. Unit
Vi Input Voltage 90 264 Vrms
Vo Output Voltage limit No load 9.5 10.0 10.5 V
Io Output Current limit 1<Vout<Vo limit 740 800 860 mA
Vor Output Ripple Io=Ilimit Vbatt=4V 100 mVpp
Vis Isolation voltage
Input to output, t=60s
(EN60950)
3000 Vrms
Top
Operating Ambient
Temperature
050
o
C
Tstg Storage Temperature Range -20 70
o
C
Vo (V)
Io (mA)
10
800
TYPICAL OUTPUT CHARACTERISTIC
GHIBLI
2/4
Loading...