WITH 3-STATE OUTPUTS (NON INVERTED)
■ HIGH SPEED:
t
= 4.5 ns (TYP.) at VCC=5V
PD
■ LOW POWER DISSIPATION:
I
=8µA (MAX.) at TA=25°C
CC
■ HIGH NOISE IMMUNITY:
V
NIH=VNIL
■ POWER DOWN PROTECTION ON INPUTS
■ SYMMETRICAL OUTPUT IMPEDANCE:
|I
|=IOL=24mA(MIN)
OH
■ BALANCED PROPAGATION DELAYS:
t
≅ t
PLH
■ OPERATING VOLTAGE RANGE:
V
(OPR) = 2V to 6V
CC
■ PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 16541
■ IMPROVED LATCH-UP IMMUNITY
DESCRIPTION
The 74AC16541 is an advanced high-speed
CMOS 16-BIT BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer
metal wiring C
This is composed of two 8-bit sections with
separate output-enable signals. For either 8-bit
buffers section, the 3 STATE control gate
operates as a two input AND such that if either
nG1
and nG2 are high, all outputs are in the high
impedence state.
= 28% VCC(MIN.)
PHL
2
MOS tecnology.
74AC16541
16-BIT BUS BUFFER
TSSOP
ORDER CODES
PACKAGE TUBE T & R
TSSOP 74AC16541TTR
PIN CO NNECTION
1/9February 2003
74AC16541
INPUT AND OUTP UT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN No SYMBOL NAME AND FUNCTION
1, 48 1G1
2, 3,5,6,8, 9,
11, 12
13,14,16, 17,
19, 20, 22, 23
24, 25 2G1
36,35,33, 32,
30, 29, 27, 26
47,46,44, 43,
41, 40, 38, 37
4, 10, 15, 21,
28, 34, 39, 45
7, 18, 31, 42 V
,1G2 Output Enable Inputs
1Y1 to 1Y8 Data Outputs
2Y1 to 2Y8 Data Outputs
,2G2 Output Enable Inputs
2A1 to 2A8 Data Outputs
1A1 to 1A8 Data Outputs
GND Ground (0V)
CC
Positive Supply Voltage
TRUTH TABLE
INPUTS OUTPUT
G1
HXXZ
XHXZ
LLHH
LLLL
X : Don’t Care
Z : High Impedance
G2 An Yn
IEC LOGIC SYMBOLS
2/9
74AC16541
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Value Unit
V
V
V
I
I
OK
I
or I
I
CC
T
stg
T
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Value Unit
V
V
V
T
dt/dv Input Rise and Fall Time (note 1) V
1) VINfrom30% to 70%of V
Supply Voltage
CC
DC Input Voltage
I
DC Output Voltage -0.5 to VCC+ 0.5
O
DC Input Diode Current
IK
DC Output Diode Current
DC Output Current
O
DC VCCor Ground Current
GND
Storage Temperature
Lead Temperature (10 sec)
L
Supply Voltage
CC
Input Voltage 0 to V
I
Output Voltage 0 to V
O
Operating Temperature
op
= 3.0, 4.5 or 5.5
CC
CC
-0.5 to +7.0 V
-0.5 to +7.0 V
± 20 mA
± 50 mA
± 50 mA
± 400 mA
-65 to +150 °C
300 °C
2to6 V
CC
CC
-55 to 125 °C
0to8
ns/V
V
V
V
3/9