SEWOO LK-P12W User Manual
All specifications are subject to change without notice
USER’S MANUAL
MODEL : LK-P12W
SEWOO TECH CO.,LTD.
374-2, Gajang-dong, Osan-si, Gyeonggi-do, 447-210, Korea
TEL : +82-31-459-8200 FAX : +82-31-459-8880
www.miniprinter.com
Rev. 01 07/12
1
Table of Contents
1.
Unpacking
2
2. Product overview 3
3. Installation & Usage 4
3-1. Display 4
3-2. Installing the Battery 5
3-3. Removing the Battery 6
3-4. Charging the Battery 7
3-5. Stock Installation 8
3-6. Peel Mode 9
3-7. Diagnostic Test 11
4. Peripherals Connection 13
4-1. Wifi(802.11b/g) Connection 13
4-2. Interface Cable Connection 14
5. Printer Cleaning 15
5-1. PrintHead Cleaning 15
5-2. Platen Roller Cleaning 16
6. Pritner Specification 17
6-1. Specification 17
7. CPCL Command Compatibilit
y
19
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTION
2
3
1. Unpacking
Printer
Battery
Recharger
Optional
Standard
2. Product overview
CHARGER
CONNECTOR
COVER OPEN
BUTTON
Front
Bottom
CD
USB Cable
Quick Reference
PEELER BODY
PEELER WING
BATTERY
DOOR
SERIAL
USB
DISPLAY
Paper
Serial cable
4
5
Button Name function
Paper Feed/
Down button
Advances the supply. Clears error message.
Moves down through menu options.
Enter button
Selects the highlighted menu option.
Up button
Moves up through menu options.
Power button
Turns the printer on and off. Press to turn
power on. Press for three seconds to turn power off.
Wakes the printer from sleep mode.
3-2. Installing the Battery
NOTE
NOTE
3-1. Display
3. Setting Up the Product
Remove the battery door. Insert the battery as shown.
1
2
Replace the battery door.
You must fully charge the battery when you receive the printer.
Batteries can be charged in the printer or in an optional external cradle
1. The battery status LEDs indicate amount of power remaining. Actual run-time
remaining depends on factors such as the contents of output,
distance to computer, etc.
2. When the battery level is very low, high density printing can result in the printer
switching off during printing resulting in possible loss of data.
Loading...