SEW EURODRIVE and Co KG NKRDCMA82 Installation Manual
Mounting Instruction
MOVIPRO
Option:
1796 6167
WLAN
-
Karte #MPCI
alten wir uns alle Rechte vor / Copyright reserved / Tous droits de modification réservés
EURODRIVE GmbH & Co KG Postfach 30
WLAN Card
Used Material
:
REC5 IP5K BASE prg.
WLAN
Karte #MPCI
Production Step
: !!!
the device must be powered off
Thermal Pad WLAN
parallel
ard Slot
completely i
pressure
Both latches must be closed completely now
Drawings
:
card in parallel to MiniPCI Slot
WLAN1
-
DCMA
-82-
MMCX
Fax ( 07251 ) 75
mandatory)
before mounting the card(s)
in an angel of about
MiniPCI connector must close with a
Used Tools
:
!!!
Page 1/7
DE
FK-FN 08.12.10
1. Mounting of 1st
PartNo. Qty. Designation
1824 0461 1
1813 0569 1 Thermal Pad
1796 6167 1 WLAN-
a) Bond 1x "
b) Attach the WLAN card in
Take care of the WLAN c
c) Insert the WLAN card
d) Press WLAN card at the
hearable click.
(WLAN1
-DCMA-82-MMCX
" in left red marked area of WLAN1 interface
to the MinPCI Slot (WLAN1)
!
n the MiniPCI Slot (WLAN1)
points down. The latches of the
!
no
25°
Figure 1 - Device with Thermal Pad
Figure 2 - Attach WLAN
Für diese technischen Unterlagen beh
SEW-
.
. D-76642 Bruchsal Tel. ( 07251 ) 75-0....
..
-1970 .... http://www.sew.de
Mounting Instruction
MOVIPRO
Option:
1796 6167
WLAN
-
Karte #MPCI
alten wir uns alle Rechte vor / Copyright reserved / Tous droits de modification réservés
EURODRIVE GmbH & Co KG Postfach 30
Drawings
:
completely
Pressure Points
-
DCMA
-82-
MMCX
Fax ( 07251 ) 75
Latch
Latch
25°
Figure 3 - WLAN card with 25° angle
Page 2/7
DE
FK-FN 08.12.10
Figure 4 - Insert WLAN card
Figure 5 - Press WLAN card down
Für diese technischen Unterlagen beh
SEW-
.
. D-76642 Bruchsal Tel. ( 07251 ) 75-0....
..
-1970 .... http://www.sew.de
Mounting Instruction
MOVIPRO
Option:
1796 6167
WLAN
-
Karte #MPCI
alten wir uns alle Rechte vor / Copyright reserved / Tous droits de modification réservés
EURODRIVE GmbH & Co KG Postfach 30
WLAN Card (
Used Material:
card is done
WLAN
Karte #MPCI
Production Step:
!!!the device must be powered off before mounting the card(s)!!!
Bond 1x " Thermal Pad WLAN " in left red marked area
Attach the WLAN card in parallel to the MinPCI S
ard Slot!
completely in the
pressure
Both latches must be closed complete
Drawings
:
Attach WLAN card in parallel to MiniPCI Slot
WLAN2
-
DCMA
-82-
MMCX
Fax ( 07251 ) 75
)
in an angel of about
The latches of the MiniPCI connector must close with a
)
Used Tools:
Page 3/7
DE
FK-FN 08.12.10
2. Mounting of 2nd
Requirement: Mounting of 1st WLAN
PartNo. Qty. Designation
1813 0569 1 Thermal Pad
1796 6167 1 WLAN-
a)
b)
Take care of the WLAN c
c) Insert the WLAN card
Press the WLAN card at the
hearable click.
(1)
-DCMA-82-MMCX
MiniPCI Slot (WLAN2)
points down.
WLAN2 optional
of WLAN2 interface
lot (WLAN2)
ly now!
no
25°
Figure 6 - Device with Thermal Pad
Figure 7 -
Für diese technischen Unterlagen beh
SEW-
.
. D-76642 Bruchsal Tel. ( 07251 ) 75-0....
..
-1970 .... http://www.sew.de
Loading...