SW-USBDVI-HR
USB External Video Card
User’s Manual
USB 2.0 Display Adapter User’s Manual
ABOUT THIS MANUAL
This manual is designed for use with the USB Display Adapter –HD . Information in this document
has been carefully checked for accuracy; however, no guarantee is given to the correctness of the
contents. The information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding the accuracy and
completeness of this document and shall in no event be liable for any loss of profit or any
commercial damage, including but not limited to special, incidental, consequential, or other damage.
SAFETY INSTRUCTIONS
Always read the safety instructions carefully:
Keep this User’s Manual for future reference
Keep this equipment away from humidity
If any of the following situation arises, get the equipment checked by a service technician:
• The equipment has been exposed to moisture.
• The equipment has been dropped and damaged.
• The equipment has obvious sign of breakage.
• The equipment has not been working well or you cannot get it to work according to the
User’s Manual.
COPYRIGHT
This document contains proprietary information protected by copyright. All right are reserved. No
part of this manual may be reproduced by any mechanical, electronic or other means, in any form,
without prior written permission of the manufacturer.
i
Table of Contents
Table of Contents
1. Introduction.......................................................................................................1
Applications ........................................................................................................2
Features..............................................................................................................2
Package Contents...............................................................................................3
System Requirements.........................................................................................3
2. Installation.........................................................................................................5
On Windows 2000 and XP..................................................................................5
On Windows Vista...............................................................................................9
Connected to the adapter and monitor..............................................................12
3. Using the Adapter...........................................................................................14
Display Properties............................................................................................. 14
Display Modes .................................................................................................. 15
Extend Your Windows Desktop to Add-on Monitor (Default) ......................16
Mirror Your Windows Desktop ................................................................... 18
Be the Primary Monitor .............................................................................. 19
Adjusting Resolution, Color Depth and Refresh Rate ....................................... 20
Configure the components......................................................................... 21
Standby and Hibernate, Shut Down and Restart............................................... 24
Disconnecting the Adapter ................................................................................ 24
Using Dual Adapters .........................................................................................24
Verifying the Driver Installation.......................................................................... 26
Uninstall the Adapter and Driver .......................................................................27
4. Troubleshooting..............................................................................................28
5. Specifications..................................................................................................30
6. Regulatory Compliance..................................................................................32
FCC Conditions ................................................................................................32
CE..................................................................................................................... 32
WEEE Information ............................................................................................ 32
ii
1. Introduction
1. Introduction
This USB 2.0 Display Adapter enables you to connect one more monitor, LCD or projector
to a computer with a USB 2.0 port. For desktop users adding an extra monitor via USB
connection is easier than ever without having to open the computer chassis to install an
internal video card. Once the installation is done, the USB-attached monitor soon wakes up.
No function key hassle to swap a second monitor.
With this handy adapter, you can enjoy many benefits brought by an add-on monitor. The
most obvious one is that you get more desktop area to have more applications visible at
one time. For example, you may work on one monitor while your family watching video on
the other. No more stacking windows within the confines of a single display. Or you may
span an application, e.g. spreadsheets, across two sides of displays. What’s more, the
adapter is hot pluggable. If you are not using the extra monitor, just unplug the adapter at
any time; no reboot needed.
System performance is an important issue when using multiple monitors. Another benefit of
this adapter is that it uses little computer resource; ensuring users get quality display
without comprising computer performance.
VGA or DVI monitor
USB-enabled computer
1
USB 2.0 Display Adapter - HD User’s Manual
Applications
Office workstation
View your large spreadsheets across two screens with display continuity
Multitask more effectively without overlapping windows
Edit on one screen while surfing the Internet information on the other
On the road
Do multiple screen presentations without bringing another computer
Easily provide multiple screen exhibitions in a trade show
Graphics workstation
Use second display for palettes/tools
Get a panoramic view of large documents
Editing workstation
Type documents on one screen while viewing reference material on the other
Compare two documents simultaneously across two screens
Financial analysis
Have one monitor per data stream
View charts and live data at the same time
Entertainment
View videos/TV on one screen and reviews on the other
Get additional perspectives when playing games
Features
Add-on monitor, LCD or projector through a single USB 2.0 port
Hot-plug ; add or remove monitor without system reboot
Small in size, works with all VGA / DVI-I displays.
Supports High Resolution up to WUXGA 1920 x 1200
Video streaming is supported up to 1080p
Extend and Mirror mode support.
Resumes from hibernation and suspend modes
Supports up to 6 USB display adapters to work simultaneously
2
1. Introduction
Package Contents
Before installation, please check the items in the package. The package should
contain the following items:
USB Display Adapter x1
Driver CD x1
USB Cable x1
Quick Installation Guide x1
DVI to VGA Adapter (Optional) x1
System Requirements
The minimum requirements for the PC are:
With Single Core CPU at 1.2GHz or higher processor clock. Intel®
Pentium®/Celeron® family, or AMD® K6®/Athlon™/Duron™ family, or
compatible processor
512MB memory
At least one USB2.0 port
30Mb of available disk space
Windows® 2000 SP 4 , XP Home or Professional (Including Table edition)
SP2 or SP3 and Vista™ SP1 (32-bit or 64-bit)
Super VGA (800 x 600) or higher resolution monitor
To play DVD on the adapter-attached monitor, in addition to the requirements
above, the following requirements should also be met:
With dual core CPU at 2.0 GHz processor clock
The adapter screen resolution be set to 800x600 with 16bit color
3
USB 2.0 Display Adapter - HD User’s Manual
In addition to the following processor and memory configurations (base on usage
model)
For 1-2 monitors, business usage, productivity target.
This may not provide full frame rate DVD playback at full screen.
1.2GHz Single Core CPU
512MB memory
For 3 monitors, where 1 could run DVD video while also targeting productivity and
business apps.
Will support only 1 video of DVD resolution at full screen：.
1.8GHz CPU
1GB memory
For 6 screen where 1 screen can run full screen DVD video：
1.6GHz Core Duo
1GB memory
4
2. Installation
2. Installation
On Windows 2000 and XP
Caution: DO NOT connect the USB display adapter to your computer before you install the
provided driver. You will be instructed to do so later.
Follow the procedures below to install the driver and then connect the adapter:
1. Insert the provided CD into your disc drive and the installer program will run
automatically when the Driver CD is inserted, and your may see the Licence
agreement screen prompted as below. Please click on I Accept to start the Driver
install.
If the installer program doesn’t run automatically, please locate and double-click on
the Autorun.exe file in the CD to launch the install program.
5
USB 2.0 Display Adapter - HD User’s Manual
2. Please wait while Windows configures DisplayLink Core Software. Your screens
may temporarily go black or flash during this process.
*Actual strings depend on your operation system. These scree n shots are from Windows XP
and might vary slightly for each operation system.
Notice for Windows 2000 users：
If prompted to restart your computer, click Yes to restart or No to manually
restart later. Note that a reboot is always needed for a successful installation.
If the reboot prompt doesn’t appear, make sure to manually reboot your
computer.
3. When finished, the installation screen will disappear and you will return to your
desktop.
4. Connect the USB display adapter to your computer and monitor. Connect the smaller
end of the USB cable to the adapter. Then connect the other end of the USB cable to
an USB 2.0 port on your computer.
6
2. Installation
5. After the connection, a pop-up message will appear in the notification area indicating
the Found New Hardware.
6. When you see the Found New Hardware Wizard screen prompted as below, please
follow the steps and Click on Next to continue the display adapter installing.
7
USB 2.0 Display Adapter - HD User’s Manual
7. Click on OK and Finish to complete the Found New Hardware Wizard installation.
Notice for users：
If prompted to restart your computer, click Yes to restart or No to manually
restart later. Note that a reboot is always needed for a successful installation.
If the reboot prompt doesn’t appear, make sure to manually reboot your
computer.
8. After installation is completed, the popup message will appear in the notification area
as following. You may click on the icon to control the new display and start to enjoy
using the USB display adapter now.
8
2. Installation
On Windows Vista
Caution: DO NOT connect the USB display adapter to your computer before you install the
provided driver. You will be instructed to do so later.
Follow the procedures below to install the driver and then connect the adapter:
1. Insert the provided CD into your disc drive and installer program will run automatically
when the Driver CD is inserted. Please click on Run Setup.exe to execute the installer
program.
Note：
If the installer program doesn’t run automatically, please locate and double-click on
the Setup.exe file in the Driver folder to launch the setup program.
If you encounter a User Account Control dialog box when attempting to install a
program, enter an administrator password or click Allow to start the installation.
9
USB 2.0 Display Adapter - HD User’s Manual
2. When you see the Licence Agreement screen prompted as below, please click on I
Accept to install the software for USB display adapter...
3. Please wait while Windows configures DisplayLink Core Software. Your screens may
temporarily go black or flash during this process.
4. When finished, the installation screen will disappear and you will return to your
desktop.
10
2. Installation
5. Connect the USB display adapter to your computer and monitor. Connect the smaller
end of the USB cable to the adapter. Then connect the other end of the USB cable to
an USB 2.0 port on your computer.
6. After installation is completed, the popup message will appear in the notification area
as following. You may click on the icon to control the new display and start to enjoy
using the USB display adapter now.
*Actual strings depend on your operation system. These screen shots are from Windows Vista 32-bit
and might vary slightly for each operation system.
11
USB 2.0 Display Adapter - HD User’s Manual
Connected to the adapter and monitor
If your monitor is not yet connected to the adapter, make the connection and power on your
monitor.
For VGA model: Use a VGA cable (not provided) to connect the VGA jack to a
monitor equipped with VGA input jack.
For DVI model: The equipped DVI-I (DVI-Integrated) connector transmits both the
digital and analog signals. This means it supports either of these two connection
types:
• It can be connected to a DVI-D (digital) monitor using a DVI cable (not
provided)
• Or, it can be connected to an analog VGA monitor using the privided DVI-I
to VGA adapter and a VGA cable (not provided).
12
2. Installation
4. After you connect the adapter, Windows will automatically complete the
installation.
5. Once the installation is done, an extended screen will appear on the add-on
monitor.
For Windows Vista, if the add-on monitor is blank, please reboot your
system again.
If required, you can connect and disconnect the add-on monitor any time
without disconnecting the adapter from the USB port on your computer.
To change the display mode, see next chapter for instructions.
During the installation, it’s normal that the screen flicks black a couple of times.
Sometimes it takes time for the add-on monitor to show the video.
13
USB 2.0 Display Adapter - HD User’s Manual
3. Using the Adapter
Display Properties
Display Properties allows you to configuration the display mode, color quality, screen
resolution, and physical arrangement of your monitors.
*The USB display adapter Display mode and adjusting Resolution, Color Depth and Refresh Rate. Please
refer to the “Display mode” and Adjusting Resolution, Color Depth and Refresh Rate “” section for details.
Easy Setting
Click on the DisplayLink Device icon and select Advanced to configuration Display
Properties as above or manually setting as below description.
Manually Setting
Position the mouse anywhere on your computer desktop, right-click and select Personalize
> Display Settings on Vista or Properties > Settings on XP/2000.
14
3. Using the Adapter
Display Modes
There is several ways you can utilize the monitor attached on the adapter. The add-on
monitor can be configured to use either “mirror mode”, “extended mode” or be the primary
display as described in this section.
Click on the DisplayLink Device icon to change the display modes or select Off to switch
to normal display mode.
15
USB 2.0 Display Adapter - HD User’s Manual
Extend Your Windows Desktop to Add-on Monitor (Default)
In this so-called “extended mode”, your display will be spread over the add-on monitor(s).
This mode allows you to perform multiple tasks more effectively without overlapping
windows.
Easy Setting
Click on the DisplayLink Device icon and select Exchange or Extend to Right; Left;
Above; Below to configuration the setting as above, or manually setting as below
description.
Manually Setting
Extended mode is the default setting. To set up the adapter to use or restore extended
mode, follow these steps:
1. Position the mouse anywhere on your computer desktop, right-click and select
Personalize > Display Settings on Vista or Properties > Settings on XP/2000.
2. In the Display drop-down menu, select the option with the string “DisplayLink
Graphics Adapter”.
3. Check the Extend the desktop onto this monitor box on Vista or Extend my
Windows desktop onto this monitor box on XP/2000.
16
3. Using the Adapter
4. Drag the icons in the window at the top of the screen to match the physical
arrangement of your primary monitor and add-on monitor.
The add-on monitor connected to the adapter may be identified as either "2" or “3”,
depending on your computer, although there may not be a total of 3 screens
connected.
5. Click OK to close the settings screen.
Once the setting is done, to use your extended desktop, simply drag and drop your
open windows over to your second monitor. However, note that some applications
may not support display on the extended desktop.
Cursor disappeared ?
If you’re in extneded mode but the add-on monitor is not connected, the desktop
still pans to the add-on monitor and it’s possible that your cursor has moved to
the extended desktop so that you cannot find it on the primary display. To solve
the problem in such a case, connect the add-on monitor to the adapter or keep
moving your mouse to try or unplug the adapter first to restore the cursor.
Video and DVD Playback in Extened Mode
On Windows Vista with extended mode, it’s suggested that you run video or DVD
playback programs on your primary monitor instead of the add-on monitor to
ensure the playback performance.
c.
a.
b.
17
USB 2.0 Display Adapter - HD User’s Manual
Mirror Your Windows Desktop
This mode is referred to as “mirror” or “clone” mode. In this mode, your original screen (the
primary display) will be mirrored to the add-on monitor.
Easy Setting
Click on the DisplayLink Device icon and select Mirror to configuration the setting as
above, or manually setting as below description.
Manually Setting
In mirror mode, the adapter will automatically select the settings (screen resolution, color
quality and refresh rate) for the add-on monitor. But you can manually adjust the settings as
required. However, the settings of the add-on monitor are limited by that of the primary
monitor. For example, even though your add-on monitor supports a resolution of up to
1680x1050, you can only configure it to use 1280x1024 due to the primary monitor only
supports a resolution of up to 1280x1024.
18
3. Using the Adapter
If you change the video output to extended mode and then want to switch back to mirror
mode, follow these steps:
1. Position the mouse anywhere on your computer desktop, right-click and select
Personalize > Display Settings on Vista or Properties > Settings on XP/2000.
2. In the Display drop-down menu, select the option with the string “DisplayLink
Graphics Adapter”.
3. Uncheck the Extend the desktop onto this monitor on Vista or Extend my
Windows desktop onto this monitor on XP/2000.
4. Click OK to close the settings screen.
Be the Primary Monitor
To make the add-on monitor the primary display:
1. Position the mouse anywhere on your computer desktop, right-click and select
Personalize > Display Settings on Vista or Properties > Settings on XP/2000.
2. In the Display drop-down menu, select the option ends with DisplayLink Graphics
Adapter.
3. Check the This is my main monitor box on Vista or Use this device as the primary
monitor box on XP/2000.
On some PCs and laptops it is necessary to disable the main display (i.e. uncheck the
Extend the desktop onto this monitor or Extend my Windows desktop onto this
monitor box for the main display) as part of the same settings change.
4. Click OK to close the settings screen.
The add-on monitor stays primary if the PC enters hibernate or suspend mode or is
rebooted. If the add-on monitor is unplugged, the main display becomes primary again.
19
USB 2.0 Display Adapter - HD User’s Manual
Adjusting Resolution, Color Depth and Refresh Rate
There are three components that make up the screen mode:
Resolution: In common usage, this refers to the number of pixels displayed on screen
horizontally and vertically.
Color Depth: This defines the number of different colors that can be shown on the screen
at the same time.
Refresh rate: Measures the speed that the entire screen is rescanned. Higher frequencies
reduce flicker.
Some monitors advertise the supported modes through the video connector. If this is the
case, the adapter identifies the supported modes from the monitor. If the monitor does not
advertise the supported modes, the adapter software chooses a set of common screen
modes for the monitor.
The software supports the modes listed below.
Color
Depth
Resolution
Name
Refresh rates
available at 16 bit
color quality
Refresh rates
available at 32 bit
color quality
640x480
VGA 60 72 75 85 60 72 75 85
800x600
SVGA 56 60 72 75 85 56 60 72 75 85
1024x768
XGA 60 70 75 85 60 70 75 85
1280x720
720p 60 60
1280x768
WXGA+ 60 75 85 60 75 85
1280x800
WXGA 60 60
1280x1024
SXGA 60 75 85 60 75
1366x768
WXGA+ 60 60
1400x1050
SXGA+ 60 75 85 60 75 85
1600x1200
UXGA 60 60
1680x1050
WSXGA+ 60 60
1920x1080
1080p 60 60
1920x1200
WUXGA 60 60
*Note that interlaced modes and reduced blanking modes are not supported.
20
3. Using the Adapter
About the resolutions and refresh rates available to users
The resolutions and refresh rates available to the user through Windows are a
comprise of the support from the following elements:
■ The USB display adapter
■ The primary monitor and the add-on monitor
■ The primary video card on your computer and installed drivers
Therefore, for example, if your monitor doesn’t support a resolution of
1920x1200, then 1920x1200 is not possible even you are using a USB display
adapter with 1920x1200 support. This ensures that the monitor cannot be put
into an unsupported mode, which might damage it.
If cloning the primary display, the video component will try to use the preferred monitor
mode. In some cases, this may not be the most appropriate mode for the cloned desktop. It
is recommended that the primary display resolution be changed to closer match the default
resolution of the add-on monitor.
Configure the components
To configure the three components (resolution, color depth and refresh rate) of a screen
mode, follow these steps:
Easy Setting
Click on the DisplayLink Device icon and select Color Quality ; Screen Rotation ;
Screen Resolution to configuration the setting as above, or manually setting as below
description.
Color Quality ：There are two
kinds of color quality, the
Medium (16-bit) and the
Highest (32-bit).
21
USB 2.0 Display Adapter - HD User’s Manual
Screen Rotation ：There are
four kinds of screen rotation,
the Normal, Rotated Left,
Rotated Right and
Upside-Down.
Screen Resolution：The
resolution will be depends on
your computer setting ,
resolution support of moniter
and else….
Manually Setting
1. Position the mouse anywhere on your computer desktop, right-click and select
Personalize > Display Settings on Vista or Properties > Settings on XP/2000.
2. In the Display drop-down menu, select the option ends with DisplayLink Graphics
Adapter.
3. To change the screen resolution or color quality, select those options on the screen.
Be sure to select one of the supported resolutions and color quality numbers in the
table above. For an add-on monitor, you can also select any resolution or color quality
supported by that monitor.
22
3. Using the Adapter
4. To change the refresh rate, click Advanced… and then click Monitor.
5. Select a refresh rate from the Screen refresh rate drop-down list and then click
Apply.
6. Click OK to close the settings screen.
23
USB 2.0 Display Adapter - HD User’s Manual
Standby and Hibernate, Shut Down and Restart
When the adapter is connected to a computer and an external monitor, if the computer
goes into standby or hibernate mode, the external monitor display goes blank.
When the computer returns to an active state, the external monitor display keeps the same
settings it had before the computer went into standby or hibernate mode. However, if the
add-on monitor was set for extended mode, windows that were previously on the external
monitor will not move back to that secondary monitor. Also, if the add-on monitor is in
extended mode and the computer requires a login after standby or hibernate mode, the
login screen appears on the primary computer monitor, not the external monitor.
If the computer is shut down, restarted and logged in, again the add-on monitor returns to
the same mode as it was before shutdown.
Disconnecting the Adapter
If the adapter is unplugged from the computer, the add-on monitor goes blank. All windows
and icons move to the primary screen.
On reconnection of the adapter, the adapter returns to the same mode as it was before
disconnection. However, windows and icons that were previously on the screen will not be
moved back.
Using Dual Adapters
Up to two adapters can be simultaneously attached to one computer. To use two adapters:
1. Install the driver as described in the “2. Installation” section and connect the first
adapter to your computer.
2. Then connect the second adapter to your computer. The system will automatically
complete the installation.
While two adapters are connected to a computer, in most cases both adapters supports
extended and mirror modes. The only exception is on Windows Vista XDDM mode as
described below.
24
3. Using the Adapter
Limitation for dual adapters on Windows Vista in XDDM mode: In this mode one
extended screen and one mirrored screen is supported. Only the first connected adapter
can be configured to use extended mode; the second adapter is forced to use mirror mode.
When you bring out the Windows display settings dialog box, you will find that only
one …DisplayLink Graphics Adapter (representing your first attached adapter) is
configurable.
What is Vista XDDM mode?
XDDM refers to Windows XP Driver Mode. It is a video card driver mode used in
some legacy computers that running the new generation Vista OS. It provides an
interface similar to Windows XP user Interface on Vista and one of its
characteristics is that it doesn’t support Windows Aero interface. To see current
display video driver mode, right-click Computer on the desktop and select
Device Manager. Then expand the Display adapters item.
25
USB 2.0 Display Adapter - HD User’s Manual
Verifying the Driver Installation
To verify your USB display adapter driver installation, please launch Device Manager by
the steps below:
Open the Control Panel and double-click Programs and Features on Vista or Add or
Remove Programs on XP/2000.
*Actual strings depend on your operation system. These screen shots are from Windows Vista 32-bit and
might vary slightly for each operation system.
A string similar to DisplayLink Core Software and DisplayLink Graphics should be
displayed.
If there is a question or exclamation mark next to that item, then the driver is not properly
installed. Please delete the item, unplug the adapter and repeat the installation steps.
26
3. Using the Adapter
Uninstall the Adapter and Driver
If for any reason you want to uninstall the video adapter and its driver, please take these
steps:
1. Open the Control Panel and double-click Programs and Features on Vista or Add
or Remove Programs on XP/2000.
2. Select DisplayLink Graphics or DispalyLink Core Software and click Uninstall or
Remove.
3. Click Yes to confirm the removal. During the removal process a couple of DOS
windows will pop up.
4. Click Yes to restart your computer and then unplug the adapter now.
27
USB 2.0 Display Adapter - HD User’s Manual
4. Troubleshooting
Q1: The display on the add-on monitor is blank.
A: If the monitor power LED is green (in most cases), wait a moment for the monitor to
show the video as sometimes it takes time for the add-on monitor to show the video. You
can also reboot your system to try again. Also make sure the computer is not in standby or
hibernation mode, which will lead the add-on monitor to be blank.
If the monitor power LED is red (in most cases), check if the connection is properly made. If
problem still exists, uninstall the driver, unplug the adapter and reinstall the driver to try
again.
Q2: The add-on monitor is flickering.
A: This is usually caused by a low refresh rate. To solve this problem:
• In mirror mode, increase the refresh rate of the main monitor. This will in turn increase
the refresh rate of the add-on monitor.
• In extended mode, increase the refresh rate of the add-on monitor.
Q3: When I play MPEG file by Windows Media Player on the extended monitor, how come
the display becomes abnormal when I switch it to full screen mode?
A: If your system is Windows XP SP1, we suggest you upgrade it to SP2 to solve this
problem.
28
4. Troubleshooting
Q4: When playing the video in full screen mode, the motion is not smooth.
A: Try the following tips to improve the smoothness of the movie playback:
• Reduce the resolution of the display to 640x480 or 800x600.
• Use the adapter in extended mode.
• Terminate any other CPU intensive applications running on the computer.
If you still have issues playing media content on the adapter, try the following steps:
• As some media players require DirectX hardware support to correctly operate, try a
different media player which requires less DirectX support.
• Drag the media player to the add-on screen and close the player. Restart the player
and it should open on the add-on monitor. Now try playing the media file again.
• Try reducing the hardware acceleration level of the primary display (NOT the add-on
monitor) to levels 1,2 or 3 and restarting the media player. The hardware acceleration
can be found by right-clicking on your desktop and click Properties > Settings >
Advanced > Troubleshoot. Some players use this setting even when playing on a
different display.
• The video playback may be unusual when the add-on monitor is mirroring the primary
display and there is another extended screen connected to the computer. The
extended screen must be disabled before the content will be correctly cloned to the
add-on monitor.
Q5: In extended mode, the add-on monitor appears to have a black border around the
desktop.
A: This happens when the resolution used by the add-on monitor is larger than the
resolution used by the primary monitor. To solve this problem, configure the add-on monitor
to use the same resolution as the primary monitor.
29
USB 2.0 Display Adapter - HD User’s Manual
5. Specifications
Host Interface
USB 2.0
Video Interface
VGA or DVI-I
Connectors Video output:
VGA HDDE 15pin Female Connector
DVI HDDE 30pin Female Connector
Host upstream link: USB Mini-B Type Female Connector
Connectivity
Up to 6 adapters on a computer
RAM
8M x 16 DDR Synchronous DRAM (SDRAM)
Power Mode
Bus-powered
Power Consumption
430mA
Operation System Support
Windows® 2000 SP 4 , XP Home or Professional (Including Table
edition) SP2 or SP3 and Vista™ SP1 (32-bit or 64-bit)
Supported Modes
Extended Desktop (Default), Mirrored Desktop, Primary Display
Resolutions, Refresh rate
and color depth
Color
Depth
Resolution
Name
Refresh rates
at 16 bit color
quality
Refresh rates
at 32 bit color
quality
640x480
VGA 60 72 75 85 60 72 75 85
800x600
SVGA 56 60 72 75 85 56 60 72 75 85
1024x768
XGA 60 70 75 85 60 70 75 85
1280x720
720p 60 60
1280x768
WXGA+ 60 75 85 60 75 85
1280x800
WXGA 60 60
1280x1024
SXGA 60 75 85 60 75
1366x768
WXGA+ 60 60
1400x1050
SXGA+ 60 75 85 60 75 85
1600x1200
UXGA 60 60
1680x1050
WSXGA+ 60 60
1920x1080
1080p 60 60
1920x1200
WUXGA 60 60
*Note that interlaced modes and reduced blanking modes are not supported.
30
5. Specifications
Housing
ABS Plastic
Dimensions
84.3 (L) x 54 (W) x17.8 (H) mm
USB Cable
z Separated from the body
z Type: USB A -Type Male to 5pin Mini USB B-Type Male
z Length: 1M
Operating temperature
10-40°C
Storage temperature
-10~60°C
Relative Humidity
< 85% non-condensing
* Specifications are subject to change without notice.
31
USB 2.0 Display Adapter - HD User’s Manual
6. Regulatory Compliance
FCC Conditions
This equipment has been tested and found to comply with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received. Including interference that
may cause undesired operation.
Important! Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
Use an approved phone set.
CE
This equipment is in compliance with the requirements of the following regulations:
EN 55 022: CLASS B
WEEE Information
For EU (European Union) member users:
According to the WEEE (Waste electrical and electronic equipment) Directive, do not
dispose of this product as household waste or commercial waste.
Waste electrical and
electronic equipment should be appropriately collected and recycled as required by
practices established for your country.
For information on recycling of this product,
please contact your local
authorities, your household waste disposal service or the shop
where you purchased the product.
SewellDirect.com
Sales and Support Line : 801-356-3823
E-mail : support@sewelldirect.com
Reorder Number / Part Number : SW-22857
32
Loading...