SEVERIN WA 2110,WA 2121,WA 2110 Important Safety Instructions Manual

5

Dear Customer,

Before using the appliance, the user should
read the following instructions carefully.

Connection to the mains supply

The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label.
This product complies with all binding CE
labelling directives.

Important safety instructions

Warning: the outer surfaces of the

appliance become very hot during
operation. Exercise great care to avoid
burns.

Do not touch any hot parts of the appliance;
use the handles only.

● Before the appliance is used, the main

body as well as any attachment fitted
should be checked thoroughly for any
defects. Should the appliance, for
instance, have been dropped onto a hard
surface, it must not be used any longer:
even invisible damage may have adverse
effects on the operational safety of the
appliance.

● Place the appliance on a heat-resistant

surface clear of any obstructions. Do not
position or operate the appliance close to
or underneath any wall-cupboards or
hanging objects such as curtains or other
inflammable materials; do not use the
appliance outdoors.

● Do not leave the appliance unattended

while it is switched on or still hot.

● To prevent damage to the housing, do

not place or operate the appliance on or
near hot surfaces (e.g. stove plates) or
open flames.

● The power cord must be kept well away

from any hot parts of the appliance.

● The power cord should be regularly

examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.

● Always remove the plug from the wall

socket after use, and also

- in case of any malfunction,

- while cleaning.

● When removing the plug from the wall

socket, never pull on the power cord;
always grip the plug itself. Do not let the
power cord hang free.

● To prevent damage to the power cord,

never twist, kink or pull on the cord
during use, or when the appliance is
stored.

● The appliance is not intended to be

operated by means of an external timer
or separate remote-control system

● This appliance is not intended for use by

any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.

● Children should be supervised to ensure

that they do not play with the appliance.

● No responsibility will be accepted if

damage results from improper use, or if
these instructions are not complied with.

● This appliance is intended for domestic

use only and not for commercial
applications.

● In order to comply with safety

regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.

Power cord storage

Depending on the model, your waffle iron

Waffle iron



has either a power cord wind-up storage or a
cord storage compartment.
Always take the power cord out of its
storage compartment and unwind it to its full
length before use.
Wind up or restore the power cord to the
storage compartment only after the waffle
iron has cooled down completely.

Before initial use

The waffle iron should be preheated for ten
minutes with the lids closed. This will
remove the smell typically encountered
when first switching on the waffle iron.
Please ensure sufficient ventilation.
(If your waffle iron has an adjustable
thermostat control, turn it to its highest
setting).
Clean the appliance afterwards as described
in Cleaning and Care.

Operation

-

Close the lids.

-

Plug in the appliance.

-

If your waffle iron has an adjustable
thermostat control, turn it to position 4.

-

Preheat the waffle iron for about eight
minutes. It is then ready for use.

-

Models with single pilot light:
The pilot light will show while the waffle
iron is preheating. Once the optimum
temperature is reached, the pilot light will
go out.

-

Models with double pilot lights:
The red indicator light will show while
the waffle iron is preheating. Once the
optimum temperature is reached, the
green light will show and the red light will
go out.

-

Open the two lids.

-

Before use, the non-stick plates should
be lightly greased with a small amount of
oil or fat that is specifically intended for
frying and may be safely heated to high
temperatures.

-

Put the dough on the middle of the lower
plate.

-

Close the upper lid and press down

gently to help spread the dough evenly.

-

The baking time is in general 2 - 3
minutes, depending on the nature of the
dough as well as the selected
temperature.

-

Models with double pilot lights:
After placing the dough in the waffle
iron, the red indicator light will show
after a short period of time. Once the
baking process is finished, the red light
will be replaced by the green one.

-

Once the baking process is finished,
remove the waffle immediately.

-

Check the level of browning. Should the
waffle be too light or too dark, adjust the
temperature control or baking time.

● The first waffle to be baked in the new

appliance should not be eaten, but
disposed of.

-

Place fresh dough into the waffle iron
immediately after removing the waffle.

-

After use, remove the plug from the wall
socket and allow the appliance to cool
down with its cooking plates open.

Practical hints

-

In order to maintain the crispness of the
waffles, place them next to each other on
a rack to cool. (Placed on top of each
other, the waffles will lose their
crispness).

-

If milk is used instead of water, the
waffles will be softer and darker.

-

In order to achieve even browning, all
ingredients should be of the same
temperature.

Cleaning and care

● Before cleaning, remove the plug from

the wall socket and wait until the
appliance has cooled down with the
cooking plates open.

● To avoid the risk of electric shock, do not

clean the appliance with water and do
not immerse it in water.

● Do not use abrasives or harsh cleaning

solutions.

● Clean the outside of the appliance with a

6