Severin AS 3949, AS 3948 User Manual

6 7
8
9
10
11
12
13
1
2
3
4
5
Dear Customer,
Before using the appliance, the user should read the following instructions carefully.
Familiarisation
1. Rating label (on underside of the unit)
3. Release button
4. Slide lock for base plate
5. Power cord
6. Stainless steel blade
7. Blade mounting
8. Base plate
9. End-piece holder with finger guard
10. Sliding tray (foldable)
11. Stop plate
12. Thickness selection knob
13. Collection tray
Connection to the mains supply
Make sure that the supply voltage corresponds with the voltage marked on the rating label. This product complies with all binding CE labelling directives.
Important safety instructions
Before the appliance is used, the main
body as well as any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, it must not be used any longer: even invisible damage may have adverse effects on the operational safety of the appliance.
This appliance is not intended for use by
any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Do not allow the slicer to come into
contact with open flames or any hot surface such as hotplates.
Do not operate the slicer if
- the unit or its power cord show any signs of damage,
- the appliance has been dropped on to a hard surface, perhaps causing internal damage,
- the sliding tray, stop plate or base plate have not been correctly fitted.
For safety reasons, always bring the stop
plate back to its rest (zero) position after use, so that it is flush with the blade.
We strongly recommend that the
appliance is only used with the sliding tray and end-piece holder properly installed and in position. Exceptions may be made only if required by the size or shape of the food to be sliced.
Always remove the plug from the wall
socket
- after use,
- in case of any malfunction,
- during cleaning of the appliance.
Do not allow the power cord to come
into contact with the blade. When removing the plug from the wall socket, never pull on the power cord.
This appliance is intended for domestic
use only and not for commercial applications.
No responsibility is accepted if damage
results from improper use, or if these instructions are not complied with.
In order to comply with safety
regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual.
4
Multi-use slicer
Loading...
+ 2 hidden pages