Page 1
Q-SERIES
Page 2
NFC AUTHENTICATION & REGISTRATION:
SEVENFRIDAY watches guarantee authenticity through scanning the integrated
NFC chip, which is readable by NFC enabled devices*.
Download the SEVENFRIDAY app, scan to ensure authenticity, create your
account and register as the ocial owner.
*The chip is completely passive, data exchange is activated and powered by the device
from close distance of 2-5mm. iPhones are not NFC enabled devices.
Page 3
AUTOMATIC MOVEMENT
MIYOTA 8219-
MADE IN JAPAN
INSTRUCTION MANUAL
Page 4
24H HAND*
*The shape of the 24h hand changes depending on the version. The time principle is the same.
NIGHT
INDICATOR
MINUTES HAND
SECONDS ADDITIONER SYSTEM
FIXED SCALE & ADDITIONER DISK
MINUTES RING
DATE DISPLAY
WINDING THE MAINSPRING
Automatic winding watches can also be
hand-wound by turning the crown several
times clockwise in the normal position.
SETTING THE TIME
1. Pull the crown out to the 1st Click position to set the date. Rotate counter clockwise to adjust.
2. Turn the crown to set the hour, minute hands.
3. After the time has been set, push the crown back to the normal position.
WATCH WINDER
Counter Clockwise
650 to 950 turns per day.
DISPLAY (24h version)
Page 5
WATCH WINDER
Counter Clockwise
650 to 950 turns per day.
SETTING THE TIME
.
MINUTES HAND
SECONDS ADDITIONER SYSTEM
FIXED SCALE & ADDITIONER DISK
MINUTES RING
DATE DISPLAY
12H HAND*
WINDING THE MAINSPRING
DISPLAY (12h version)
Automatic winding watches can also
be hand-wound by turning the crown
several times clockwise in the normal
position.
1. Pull the crown out to the 1st Click position to set the date. Rotate counter clockwise to adjust.
2. Turn the crown to set the hour, minute hands.
3. After the time has been set, push the crown back to the normal position.
*The shape of the 24h hand changes depending on the version. The time principle is the same.
Page 6
MINUTES RING
60 MIN
30 MIN
15 MIN45 MIN
MINUTES HAND
MINUTES
RING
Page 7
SECONDS
ADDITIONER SYSTEM
HOW DOES
IT WORK?
ADDITIONER DISK +
FIXED SCALE = SECONDS
*CLOCKWISE ROTATION
FIXED SCALE
ADDITIONER DISK*
FIXED SCALE
ADDITIONER DISK*
Q1/01 and Q2/01 Seconds Reading
Q3/01 Seconds Reading
Page 8
(Day & Night indicator in the night area) (Day & Night indicator in the day area)
DISPLAY (24h Version)
EXAMPLE
1 EXAMPLE 2
Page 9
DISPLAY (12h Version)
EXAMPLE
1
EXAMPLE
2
Page 10
FAST STRAP CHANGER
ATTENTION
TO AVOID DAMAGING THE SYSTEM, DO NOT USE SHARP
OR POINTY OBJECTS, USE A WATCH PUSHER TOOL FOR
CORRECTOR OR ANY SOFT POINTED OBJECTS.
Page 11
Release the strap from the side slot.
REMOVING STRAP
Press to release.
ATTENTION
MAKE SURE YOU ARE PROPERLY AND SAFELY INSTALLED TO
PROCEED STRAP CHANGE (ON TOP OF A RIGID SURFACE).
Page 12
Insert the Pin from the right to the left.
Engage the Pin in the slot.
Make sure it CLICKS and it is secure.
ASSEMBLING STRAP
Page 13
Pull out the buckle from the strap. Pull out the pin buckle.
Pull out the spring bar.
REMOVING BUCKLE
Press to release.
ATTENTION
TO AVOID DAMAGING THE SYSTEM, DO NOT USE SHARP
OR POINTY OBJECTS, USE A WATCH PUSHER TOOL FOR
CORRECTOR OR ANY SOFT POINTED OBJECTS.
Page 14
All rights reserved to SEVENFRIDAY®, unless stated otherwise, this manual
is forbidden to be duplicated, published or modied for any purpose or reason.
Loading...