![](/html/c0/c0c1/c0c1e40c7487b506b06a5864b46f82bd24b13104f7d4f31d6276de04fd304c83/bg1.png)
DROP-IN SERVING EQUIPMENT
HOT PAN
Electrically Heated
Single Control
Item No.
Quantity
c
WH-2
c
WH-3
c
WH-4
c
WH-5
c
WH-6
DESCRIPTION:
The WH series hot pan is a versatile electrically
heated drop-in serving unit that can be used as
an open bain marie or with standard 12” x 20”
steam table pans. The pan construction enables
the unit to be used either wet or dry. Its stainless
steel inner liner is free of all obstructions for
ease of cleaning.
The pan is fully insulated and provided with a
factory applied gasket so that it can be installed
in the finest wood fixtures, without marring the
counter top. All units are furnished with a 3/4”
dia. drain and come in five convenient sizes, to
accommodate two to six 12” x 20” steam table
pans. Adapter bars are available for fractional
size pans.
WH-3 SHOWN
FEATURES:
g
Fully insulated to retain heat - protects
fixtures and saves energy
g
Open bain marie construction
g
Thermostatically controlled
g
Factory applied gasket - makes installation a
snap and seals units to the counter top, thus
eliminating seepage
g
Can be used with standard 12” x 20” pans, or
fractional size pans with the use of adapter
bars
g
NSF certified; UL recognized
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
SS-1
![](/html/c0/c0c1/c0c1e40c7487b506b06a5864b46f82bd24b13104f7d4f31d6276de04fd304c83/bg2.png)
HOT PAN
Electrically Heated Single Control
MODEL “A” PAN SIZE
WH-2 29-3/4” 19-7/8” X 25-1/2” X 6 22-1/4” X 28” 62
c
c
WH-3 43-1/2” 19-7/8” X 39-1/4” X 6 22-1/4” X 41-3/4” 85
WH-4 57-1/4” 19-7/8” X 53” X 6 22-1/4” X 55-1/2” 110
c
WH-5 71” 19-7/8” X 66-3/4” X 6 22-1/4” X 69-1/4” 165
c
WH-6 84-3/4” 19-7/8” X 80-1/2” X 6 22-1/4” X 83” 210
c
ote: Numeral following the model letters denotes the 12 x 20 pan capacity.
N
A
12”
24”
12”
Plan View
CUT-OUT
REQUIRED
Removable separator
channels
SHIP WT.
(lbs.)
c
c
c
c
c
19 7/8” ID
ELECTRICAL CHARACTERISTICS
MODEL VOLTAGE/KW/AMPS
WH-2
WH-3
WH-4
WH-5
WH-6
ote: Where changes in electrical are necessary contact factory.
N
120V - 1.7 KW - 14.2
208V - 1.7 KW - 8.2
240V - 1.7 KW - 7.1
208V - 2.55 KW - 12.3
240V - 2.55 KW - 10.6
208V - 3.4 KW - 16.4
240V - 3.4 KW - 14.2
208V - 4.25 KW - 20.4
240V - 4.25 KW - 17.7
208V - 5.1 KW - 24.5
240V - 5.1 KW - 21.3
NEMA
CONFIGURATION
5-20P
6-15P
6-15P
L6-20P
6-15P
L6-30P
L6-20P
L6-30P
L6-30P
6-50P
L6-30P
9”
3 3/4”
4 1/8”
7 1/4”
Elevation
SPECIFICATIONS:
TOP: Constructed of 18 gauge, type 304 stainless
steel, die stamped with a raised perimeter bead.
There shall be a solid vinyl gasket under the beaded
edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed
mounting lugs are provided along the inner surface of
the top to hold the removable adapter bars in place.
LINER: The inner liner shall be 18 gauge type 304
stainless steel, one piece construction, all welded
ground and polished to a uniform finish. All corners are
coved with a minimum 1/4” radius. A 3/4” dia. drain,
with strainer, brass nipple, and valve is provided.
INSULATION: The pan is fully insulated with high
density fiberglass insulation, 1” thick on all sides, 2”
thick on the bottom and enclosed by a 22 gauge galvanized steel outer liner. The entire unit is removable
without the use of tools.
ELECTRICAL: The unit is provided with individual
2 1/2”
3 3/4”
6” ID
3 3/4”
End View
850 watt heating elements, pre-wired to a single thermostat control with a pilot light. A 6’ long, 3-wire
cord and plug is provided, extending from the control box located under the unit, on operator’s left.
Available for single phase power only.
Specifications subject to change without notice.
ACCESSORIES:
c
Stainless steel adapter bars
c
Stainless steel adapter plate - specify openings
(see page SS-29)
c
Apron mounted remote controls, CONTACT
FACTORY for opening sizes
c
* Rear drain extension
c
* Remote thermostat
c
Remote switch
c
Automatic water fill
Note: Units with these accessories * are not currently UL listed
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
SS-2
01/10-SC