Set-N-Serv BIMD Specifications

BIMD

BUILT-IN MILK DISPENSER W/ CONDENSING UNIT

SPECIFICATIONS

CONSTRUCTION:

Shall have heavy-duty galvanized outer casing,
with stainless steel inner liner and 1” l.P.S. drain,
separated by high efficiency polyurethane
foamed in-place insulation, high impact plastic
breaker strip and raised edge throat liner. The
cabinet and condensing unit is supported by an
all welded galvanized angle frame.

REFRIGERATION:

Thecabinetshallhave copper coilssoldered to the
outside of the inner liner, on three sides, opposite
the condensing unit. Condensing unit shall be low
temp,pressurecontrolled120v/6Ocy/1 phase, her­metically sealed, to power the system, and use
134-Arefrigerant.A 6’ 3 wire powercord and plug,
NEMA-5-15P, shall be provided.

Project Name
NO# Item NO# Quantity

LIDS:

Shall be hinged, folding type, with stainless steel
outer shell, high impact plastic underliner, and
foamed in-place insulation.

SELF-LEVELING:

Elevators shall be die stamped telescoping tub­ing, non-fatiguing compression type springs, all
stainless steel, completely enclosed.

BUILT-IN MILK & BEVERAGE DISPENSER

FOR HIGH VOLUME LIMITED SPACE

APPLICATIONS

OPTIONS AND ACCESORIES



Plexiglas lids



Lid locking device



220V / 50 cycle compressor



5-year compressor warranty



Special height

“ALL PRICES AND SPECIFICATIONSSUBJECT TO CHANGE WITHOUT NOTICE”

a subsidiary of Mercury Aircraft

1135 NW 159Dr.,Miami, Florida 33169

Tel: [phone] or [phone] • Fax: [phone]

47

BIMD

BUILT-IN MILK DISPENSER

STANDARD FEATURES:

ELEVATORS AND SPRINGS - STAINLESS STEEL

•

SELF-LEVELING MILK DISPENSER

•

DIVIDER TRAYS FOR (260) -1/2 Pt.

•

MINI-PEAK CARTONS

MODEL L x W x H DISPENSER OPENING ELECTRICAL SHIP WT. (LBS.)

BIMD 40-3/4” x 20-3/4” x 28” 16-3/4” x 22-3/4” 1/4 HP / 6.80 AMPS / 120V 400

a subsidiary of Mercury Aircraft

1135 NW 159 Dr.,Miami, Florida 33169

Tel: [phone] or [phone] • Fax: [phone]

48

10/07-SC