Servis DC4752LEDW User Manual [nl]
DISHWASHER
User Manual
Model Number:
DC4752LEDW
Contents
01 Welcome
02 Safety Instructions
REGISTER TO
ACTIVATE YOUR
2 YEAR
GUARANTEE NOW
SERVIS.CO.UK 0800 0124382
Parts & Labour for 2 years. Go to www.servis.co.uk
for more information
07 Your Dishwasher
11 Technical Speciļ¬ cation
12 Installation
19 Setting Up Your Dishwasher
23 Using Your Dishwasher
35 Maintenance
41 Troubleshooting
48 Product Fiche
49 Guarantee
51 Index
T: 0800 0124 382T: 0800 0124 382
WELCOME SAFETY INSTRUCTIONS
WELCOME
Thank you for choosing this Servis Dishwasher, which has been designed and manufactured to
give you many years of trouble-free service.
You may already be familiar with using a similar product but please take time to read these
instructions, which have been written to ensure you get the very best from your purchase.
WARRANTY
Servis provides you with a guarantee which will protect you should your Dishwasher develop an
electrical or mechanical fault during the guarantee period. To ensure that you get a prompt and
efficient service, please register your Dishwasher immediately.
You will find a warranty card included within the packaging. To register, complete the form, or:
Visit us at www.servis.co.uk
Call us on 0800 0124 382.
ITEMS INCLUDED
Dishwasher
Fill hose
Figure 1
SAFETY INSTRUCTIONS
To ensure your safety and the safety of others, please read the following safety
precautions before you operate your Dishwasher.
Your Dishwasher conforms to current safety requirements. Inappropriate use can, however,
lead to personal injury and damage to property. To avoid the risk of accidents and damage to
your Dishwasher, read this user guide carefully before using it for the first time. It contains
important information on the installation, safety, use and maintenance of your Dishwasher.
Retain this user guide for future use and pass it on to any new owners.
Read this user guide before using or installing your Dishwasher.
01 02
T: 0800 0124 382 T: 0800 0124 382
SAFETY INSTRUCTIONS
Your Dishwasher is for domestic use only and is only intended to wash and dry items which
are specified by the manufacturer to be dishwasher-safe. Do not use your Dishwasher for
any purpose not expressly specified in this user guide.
Before setting up your Dishwasher, check for any external visible damage. Do not install or
use your Dishwasher if it is damaged. Prolonged intensive use of your Dishwasher may call
for additional ventilation.
Before connecting your Dishwasher, ensure that the voltage and connected load information
in this guide matches that of the mains electricity supply. If in doubt, consult a qualified
electrician.
Before connecting your Dishwasher, ensure that all electrical connections match the values
on the rating plate. Servis cannot be held responsible for any damage that may occur due to
improper connections. If in doubt, consult a qualified electrician.
Do not connect your Dishwasher to the mains electricity supply using an extension lead or
multi socket. These types of connection can cause overheating.
Make sure that the power supply cable is positioned where you can reach it if required.
A damaged power cord/plug can cause fire or give you an electric shock. When damaged it
must be replaced. This should only be done by qualified personnel.
Never remove the plug from the socket by pulling the cord. Always hold the plug.
Never touch the power cord/plug with wet hands as this could cause a short circuit or
electric shock.
Do not touch your Dishwasher if your hands or feet are wet.
Your Dishwasher can reach high temperatures in use. Do not place it next to a refrigerator
or freezer.
Do not put your Dishwasher in any location where the room temperature is likely to fall below
0 0C.
Do not mount heat sources such as ovens near or on the Dishwasher. Heat from these devices
may damage your Dishwasher.
This Dishwasher is designed to be used in houses and similar places. (IEC 60335-2-5/A2)
Faulty components must only be replaced by a suitably qualified Service Agent using
genuine spare parts.
Unauthorised repairs could result in unforeseen dangers for the user. Repairs should only be
undertaken by an approved service agent.
In the event of a fault or for cleaning purposes, your Dishwasher is only completely isolated
from the electricity supply when it is unplugged from the mains.
Your Dishwasher must only be connected to your water supply using the supplied new fill
hose. Old hoses must not be reused.
Make sure that the drain hose is not kinked or compressed or the water may not drain away
from the Dishwasher properly.
03 04
T: 0800 0124 382 T: 0800 0124 382
SAFETY INSTRUCTIONS
Do not make any alterations to your Dishwasher, unless authorised to do so by Servis.
The packaging of the Dishwasher could be hazardous to children. Please refer to the
disposal instructions on the rear cover.
Please ensure that you have removed all of the packaging materials and protective tape
from inside and outside your Dishwasher before using.
Keep the document bag that contained this user manual out of reach of children and babies to
prevent the risk of suffocation.
Keep the small items found in the document bag out of reach of small children and babies.
Only use detergents and rinse aids which are designed specifically for use with dishwashers.
Use soft grain or powder softener salt. Do not use table salt or sea salt in your Dishwasher.
Never use your Dishwasher without a filter.
Do not overload the drawers or place items where they can block the rotary spray arms.
Never force the door open when your Dishwasher is running.
For energy and water saving, remove coarse residues and food waste from your dishes before
placing your dishes in the Dishwasher.
Place hollow items, such as bowls, glasses and pots into the Dishwasher face-down wherever
possible. However, do not place tall glasses so that their stems can block the rotary spray arm.
Place cutlery point down in the cutlery basket, or flat in the top basket.
Check whether plastic items are heat-resistant before washing them in the Dishwasher.
Do not touch the drain hose or any discharged water while your Dishwasher is running. The
high temperatures involved pose a burn risk.
Clean the rotary spray arms and the filter at least once a week.
Check the rinse aid indicator regularly and top up with rinse aid when required.
Your Dishwasher is not intended for use by people (including children) with reduced physical,
sensory or mental capabilities, or lack of experience or knowledge, unless they have
been given supervision or instruction concerning the use of your Dishwasher by a person
responsible for their safety.
To avoid risk of injury do not allow children to play on or near your Dishwasher or to play with
its controls.
Do not sit or stand on the open door of your Dishwasher as it may fall over.
05 06
T: 0800 0124 382 T: 0800 0124 382
YOUR DISHWASHER
FRONT VIEW REAR VIEW
1
On/off switch
4
Control Panel
3
Feet
Power Cable
1
2
Drain hose
Cold water
3
inlet
Feet
4
Feet
4
Door Handle
2
Feet
4
On/off switch.
1
Door handle.
2
3
Control panel.
4
Feet.
Figure 2
07 08
T: 0800 0124 382 T: 0800 0124 382
Power cable.
1
Drain hose; provides an outlet for the dirty water from your Dishwasher.
2
Cold water inlet; connects your Dishwasher to your cold water supply.
3
4
Feet.
Figure 3
YOUR DISHWASHER
INSIDE VIEW (WITH DRAWERS)
1
Upper Drawer
Cutlery Box
2
Lower Drawer
3
Door
4
INSIDE VIEW (WITHOUT DRAWERS)
Drying nozzle
1
Detergent
2
compartment/
Rinse aid
compartment
Salt Compartment
3
4
Filters
Upper basket.
1
Cutlery box.
2
3
Lower basket.
4
Door.
Figure 4
09 10
T: 0800 0124 382 T: 0800 0124 382
Drying nozzle (one each side).
1
Detergent compartment/Rinse aid compertment.
2
3
Salt compartment.
Filters.
4
Light (Not shown)
5
Figure 5
TECHNICAL SPECIFICATION
INSTALLATION
TECHNICAL SPECIFICATION
Capacity 10 place settings
Height 845 mm
Height (without worktop) 815 mm
Width 450 mm
Depth 598 mm
Net Weight 40 kg
Electricity Input 220-240 V, 50 Hz
Total Power 1900 W
Heating Power 1800 W
Pump Power 100 W
Drain Pump Power 30 W
Water Supply Pressure 0.03 MPa (0.3 bar) - 1 MPa (10 bar)
INSTALLATION REQUIREMENTS
To avoid risk of injury, please take care when moving your Dishwasher. It is heavy and we
recommend that a minimum of two people move your Dishwasher.
To unpack your Dishwasher and manoeuvre it to the installation area, one person should hold it
by the front feet and the other person at the edge of the lid at the rear.
Your Dishwasher measures 84.5 x 45.0 x 59.8cm and will require an installation area with the
space to allow the door to fully open and provide easy access to the plumbing and electrical
connections.
The most suitable installation surface for your Dishwasher is a concrete floor as it is less prone
to vibration. Soft floor surfaces such as carpets and rugs are not suitable.
If possible, install your Dishwasher in the corner of the room as it is often the most stable part of
the floor.
Do not install your Dishwasher in rooms where temperatures below freezing may occur as frozen
hoses may burst or split.
Current 10 A
11 12
T: 0800 0124 382 T: 0800 0124 382
INSTALLATION
ADJUSTING THE FEET
For safe operation, it is important that your Dishwasher is level and securely positioned on all
four feet. Incorrect installation may cause the Dishwasher to vibrate and increase your water and
electricity consumption. Never place cardboard, wood or similar materials under your Dishwasher
to increase stability.
The four adjustable feet are used to level the Dishwasher. To adjust the feet (fig 6):
To increase the height of the Dishwasher, turn the feet anti-clockwise.
To decrease the height of the Dishwasher, turn the feet clockwise.
After making adjustments, use a spirit level to check that the Dishwasher is level.
WATER SUPPLY CONNECTION
Your Dishwasher uses an energy efficient cold fill system, which means that the
filled with cold water which is then heated to wash the dishes. As a result, no heat is lost in the
pipeline from the hot water supply.
Connect your Dishwasher to your cold water supply only. If your previous
and cold fill, check that the hot tap on your water supply is closed to avoid leakage. Only use the
fill hose supplied and not one from your old Dishwasher. Only one hose is required to install your
Dishwasher to the cold water supply. The inlet hose provided with your Dishwasher connects the
rear of your
supply:
1
Connect the angled end of the fill hose to the cold water inlet on the rear of your
Dishwasher
Dishwasher by screwing the threaded connector clockwise (fig 7). Take care not to
overtighten the connection. Hand tight is sufficient.
and the cold water supply. To connect your Dishwasher to the cold water
Dishwasher
Dishwasher
is
had a hot
Figure 6
Figure 7
13 14
T: 0800 0124 382 T: 0800 0124 382
Loading...