Servis DC4749LEDW Instruction manual
DISHWASHER
User Manual
Model Number:
DC4749LEDW
Contents
01 Welcome
02 Safety Instructions
REGISTER TO
ACTIVATE YOUR
2 YEAR
PARTS WARRANTY
SERVIS.CO.UK 0333 577 7232
Your appliance comes with a free one year parts and labour warranty.
Register within 30 days of purchase to receive a free second year
parts warranty.
07 Technical Specifi cation
08 Installation
15 Your Dishwasher
19 Setting Up Your Dishwasher
23 Using Your Dishwasher
35 Maintenance
41 Troubleshooting
48 Product Fiche
49 Guarantee
51 Index
0333 577 7232
0333 577 7232
WELCOME SAFETY INSTRUCTIONS
WELCOME
Thank you for choosing this Servis Dishwasher, which has been designed and manufactured to
give you many years of trouble-free service.
You may already be familiar with using a similar product but please take time to read these
instructions, which have been written to ensure you get the very best from your purchase.
WARRANTY
Servis provides you with a guarantee which will protect you should your Dishwasher develop an
electrical or mechanical fault during the guarantee period. To ensure that you get a prompt and
efficient service, please register your Dishwasher immediately.
You will find a warranty card included within the packaging. To register, complete the form, or:
Visit us at www.servis.co.uk
Call us on 0333 577 7232
ITEMS INCLUDED
Dishwasher
SAFETY INSTRUCTIONS
To ensure your safety and the safety of others, please read
the following safety precautions before you operate your
Dishwasher.
Your Dishwasher conforms to current safety requirements.
Inappropriate use can, however, lead to personal injury
and damage to property. To avoid the risk of accidents
and damage to your Dishwasher, read this user guide
carefully before using it for the first time. It contains
important information on the installation, safety, use and
maintenance of your Dishwasher. Retain this user guide for
future use and pass it on to any new owners.
Read this user guide before using or installing your
Dishwasher.
Your Dishwasher is for domestic use only and is only
intended to wash and dry items which are specified by
the manufacturer to be dishwasher-safe. Do not use your
Dishwasher for any purpose not expressly specified in this
user guide.
Fill hose
Before setting up your Dishwasher, check for any external
visible damage. Do not install or use your Dishwasher if it
is damaged. Prolonged intensive use of your Dishwasher
may call for additional ventilation.
This Dishwasher is designed to be used in houses and
similar places. (IEC 60335-2-5/A2)
Figure 1
01 02
T: 0333 577 7232 T: 0333 577 7232
SAFETY INSTRUCTIONS
Before connecting your Dishwasher, ensure that the voltage
and connected load information in this guide matches that of
the mains electricity supply. If in doubt, consult a qualified
electrician.
Before connecting your Dishwasher, ensure that all
electrical connections match the values on the rating plate.
Servis cannot be held responsible for any damage that may
occur due to improper connections. If in doubt, consult a
qualified electrician.
Do not connect your Dishwasher to the mains electricity
supply using an extension lead or multi socket. These
types of connection can cause overheating.
Make sure that the power supply cable is positioned where
you can reach it if required.
A damaged power cord/plug can cause fire or give you an
electric shock. When damaged it must be replaced. This
should only be done by qualified personnel.
Never remove the plug from the socket by pulling the cord.
Always hold the plug.
Never touch the power cord/plug with wet hands as this
could cause a short circuit or electric shock.
Do not touch your Dishwasher if your hands or feet are
wet.
Your Dishwasher can reach high temperatures in use. Do
not place it next to a refrigerator or freezer.
Do not put your Dishwasher in any location where the room
temperature is likely to fall below 0 0C.
Do not mount heat sources such as ovens near or on the
Dishwasher. Heat from these devices may damage your
Dishwasher.
Faulty components must only be replaced by a suitably
qualified Service Agent using genuine spare parts.
Unauthorised repairs could result in unforeseen dangers
for the user. Repairs should only be undertaken by an
approved service agent.
In the event of a fault or for cleaning purposes, your
Dishwasher is only completely isolated from the electricity
supply when it is unplugged from the mains.
Your Dishwasher must only be connected to your water
supply using the supplied new fill hose. Old hoses must not
be reused.
Make sure that the drain hose is not kinked or compressed
or the water may not drain away from the Dishwasher
properly.
Do not make any alterations to your Dishwasher, unless
authorised to do so by Servis.
03 04
T: 0333 577 7232 T: 0333 577 7232
SAFETY INSTRUCTIONS
The packaging of the Dishwasher could be hazardous to
children. Please refer to the disposal instructions on the
rear cover.
Please ensure that you have removed all of the packaging
materials and protective tape from inside and outside your
Dishwasher before using.
Keep the document bag that contained this user manual
out of reach of children and babies to prevent the risk of
suffocation.
Keep the small items found in the document bag out of reach
of small children and babies.
Only use detergents and rinse aids which are designed
specifically for use with dishwashers.
Use soft grain or powder softener salt. Do not use table salt
or sea salt in your Dishwasher.
Place hollow items, such as bowls, glasses and pots into the
Dishwasher face-down wherever possible. However, do not
place tall glasses so that their stems can block the rotary
spray arm.
Place cutlery point down in the cutlery basket, or flat in the
top basket.
Check whether plastic items are heat-resistant before
washing them in the Dishwasher.
Do not touch the drain hose or any discharged water while
your Dishwasher is running. The high temperatures involved
pose a burn risk.
Clean the rotary spray arms and the filter at least once a
week.
Check the rinse aid indicator regularly and top up with rinse
aid when required.
Never use your Dishwasher without a filter.
Do not overload the drawers or place items where they can
block the rotary spray arms.
Never force the door open when your Dishwasher is
running.
For energy and water saving, remove coarse residues and
food waste from your dishes before placing your dishes in
the Dishwasher.
05 06
T: 0333 577 7232 T: 0333 577 7232
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Do not sit or stand on the open door of your Dishwasher as it
may fall over.
TECHNICAL SPECIFICATION
INSTALLATION
TECHNICAL SPECIFICATION
Capacity 10 place settings
Height 845 mm
Height (without worktop) 815 mm
Width 450 mm
Depth 598 mm
Net Weight 40 kg
Electricity Input 220-240 V, 50 Hz
Total Power 1900 W
Heating Power 1800 W
Pump Power 100 W
Drain Pump Power 30 W
Water Supply Pressure 0.03 MPa (0.3 bar) - 1 MPa (10 bar)
INSTALLATION REQUIREMENTS
To avoid risk of injury, please take care when moving your Dishwasher. It is heavy and we
recommend that a minimum of two people move your Dishwasher.
To unpack your Dishwasher and manoeuvre it to the installation area, one person should hold it
by the front feet and the other person at the edge of the lid at the rear.
Your Dishwasher measures 84.5 x 45.0 x 59.8cm and will require an installation area with the
space to allow the door to fully open and provide easy access to the plumbing and electrical
connections.
The most suitable installation surface for your Dishwasher is a concrete floor as it is less prone
to vibration. Soft floor surfaces such as carpets and rugs are not suitable.
If possible, install your Dishwasher in the corner of the room as it is often the most stable part of
the floor.
Do not install your Dishwasher in rooms where temperatures below freezing may occur as frozen
hoses may burst or split.
Current 10 A
07 08
T: 0333 577 7232 T: 0333 577 7232
INSTALLATION
ADJUSTING THE FEET
For safe operation, it is important that your Dishwasher is level and securely positioned on all
four feet. Incorrect installation may cause the Dishwasher to vibrate and increase your water and
electricity consumption. Never place cardboard, wood or similar materials under your Dishwasher
to increase stability.
The four adjustable feet are used to level the Dishwasher. To adjust the feet (fig 6):
To increase the height of the Dishwasher, turn the feet anti-clockwise.
To decrease the height of the Dishwasher, turn the feet clockwise.
After making adjustments, use a spirit level to check that the Dishwasher is level.
WATER SUPPLY CONNECTION
Your Dishwasher uses an energy efficient cold fill system, which means that the
filled with cold water which is then heated to wash the dishes. As a result, no heat is lost in the
pipeline from the hot water supply.
Connect your Dishwasher to your cold water supply only. If your previous
and cold fill, check that the hot tap on your water supply is closed to avoid leakage. Only use the
fill hose supplied and not one from your old Dishwasher. Only one hose is required to install your
Dishwasher to the cold water supply. The inlet hose provided with your Dishwasher connects the
rear of your
supply:
1
Connect the angled end of the fill hose to the cold water inlet on the rear of your
Dishwasher
Dishwasher by screwing the threaded connector clockwise (fig 7). Take care not to
overtighten the connection. Hand tight is sufficient.
and the cold water supply. To connect your Dishwasher to the cold water
Dishwasher
Dishwasher
is
had a hot
Figure 6
Figure 7
09 10
T: 0333 577 7232 T: 0333 577 7232
INSTALLATION
WATER SUPPLY CONNECTION
2
Screw the straight end of the hose clockwise to a 19mm (3/4’’) cold water tap until hand
tight (fig 8). Take care not to trap or kink the hose.
Figure 8
DRAIN HOSE CONNECTION
The drain hose
can be connected
to a standpipe, as
shown. The hose
must be between
50cm to 110cm
from the ground.
Figure 9
The cold water pressure for a normal household system ranges from between 0.1 to 1 Mpa. Your
Dishwasher will run at optimum efficiency in this range.
Once you have made all of the connections, carefully turn your cold water supply on and check
for leaks.
Do not connect your Dishwasher to a surface water drain.
Connect your Dishwasher to your household drainage system (fig 9).
For your Dishwasher to function properly the outlet end of the drain hose must be at a minimum
of 50cm and a maximum of 110cm from the ground.
CAUTION: Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed.
Do not attempt to extend the drain hose by adding extra sections.
11 12
T: 0333 577 7232 T: 0333 577 7232
INSTALLATION
ELECTRICAL CONNECTION
Your Dishwasher requires a 220-240V, 50Hz mains supply. Do not use any other supply.
Your Dishwasher may be fitted with a moulded plug, which cannot be rewired.
If the fuse cover becomes damaged, you must not use the plug.
If your plug requires changing because it is not suitable for your socket, or it is damaged,
you should consult a qualified electrician.
Fuse:
Replacement fuses should be ASTA-approved to BS1362 and have the correct 13 Amp
rating.
Replacement fuses can be purchased from an electrical supplier.
PREPARING YOUR DISHWASHER FOR FIRST USE
Remove all packaging from the
Set the water softener level (see page 20).
Add 1 kg of salt to the salt compartment and fill with water until it is almost overflowing
(see page 21).
Fill the rinse aid compartment (see page 22).
Run the Dishwasher unloaded (see page 29).
Dishwasher
.
13 14
T: 0333 577 7232 T: 0333 577 7232
Loading...