
WHUB-001 Diagram
MAX3232
RS232
12V
RJ45
DC/DC
12V to 3.3V
UART
3.3V
24MHZ
EM357
MCU
Zigbee Module
selectable ant*
SE2436 PA
*SE2436 is using external antenna by default.
WHUB-001 Basic Instruction Manual
Wiring the wire as shown in Figure 1
d
WHUB-001
c
a
b
Figure 1 Setting up SensorGateway and WHUB-001
a) Put the pole to the “WHUB-001”.
b) Attach orange LAN cable between “SensorGateway” and “WHUB-001”.
c) LAN “SensorGateway” to the Local Network with a PC.
d) Powered “SensorGateway” with 12VDC Adaptor.
e) See IP on OLED Display (Default IP is fixed to 192.168.11.160) and put them to Web
browser to display SensorGateway’s web server as shown in Figure 2