serverLink SL-HXP-070,SL-HXP-100 Instructions Manual
Package Contents
● HDMI Extender Transmitter Unit x 1
● HDMI Extender Receiver Unit x 1
● Power Adapter x 1
● User Manual x 1
● Grounding Wire x 2
● Foot Pad Set x 2
Product Description
1
LED Indicator
2
PP5-HEM122Z-200
Features and functions may be added or changed
after the manual was written. Please visit our
website to download the latest version of manual
for reference.
Features
● Extend your HDMI signal up tp 100m over a single CAT 5e or CAT 6
cable
● Supports full uncompressed HD video and audio
● Supports High Speed HDMI with 3D
● Supports Phantom Power - Use a single power supply at either the
transmitter end or the receiver end
● HDMI resolution support: 4K2K, 1080p, 1080i, 720p, 576p, 576i, 480p
and 480i
● Deep Colour support: 24-bit and 36-bit
● Audio format support: LPCM, Dolby AC-3, DTS7.1 & DSD
● HDCP version: HDCP v1.2
● Supports bandwidth up to 10.2Gbps
● Compact size - easy to set up and simple to install
4
Specications
3
Connection Pattern
HDMI Extender
over CAT 5
Model
Transmitter Unit Receiver Unit
Input → Output HDMI → RJ45 RJ45 → HDMI
LED
(Link / Video status)
x 1 (Dual Color) x 1 (Dual Color)
Video Resolution (max)
4K Ultra HD 2160p (3840 x 2160)
Full HD 1080p (1920 x 1080)
Extension Distance
SL-HXP-070: 70m @ 1080p / 35m @ 4K2K
SL-HXP-100: 100m @ 1080p / 70m @ 4K2K
Power Supply DC 12V (Phantom Power)
Enclosure Metal
Weight (g) 120 195
H x W x D (mm) 22 x 52 x 80 25 x 67 x 80
Above video resolution and extension distance are based on a single CAT 5e
or CAT 6 24AWG solid cable without cascade. STP cabling is recommended
for environments with high EMI or RFI. For the best performance results, using
stranded cabling or other thinner cables and coiling of excess cable lengths
should be avoided.
1080p up to 100m
Transmitter Unit
Receiver Unit
Status
Power on Link OK No video source or monitor connected
Tx
Green Blue Flashing blue & green
Rx
Red Blue Flashing blue & red
NOTE:
1. The system will disable the video output signal when it detects non-HDCP
compliant display(s) on playing the HDCP video source. All the connected
output displays MUST be HDCP compliant when the video source is HDCP
compliant.
2. The quality of the output signal will largely depend upon the quality of the
video source, cable and display device used. Low-quality cables can degrade
the output signal causing elevated noise levels and so the use of good
quality cables is recommended.
LED
Unit
Model
Maximum Distance
@ 1080p
Maximum Distance
@ 4K2K
SL-HXP-070
70m 35m
SL-HXP-100
100m 70m
Low-quality cables elevate noise levels and degrade output signals. Please
use good quality cables and display devices that are capable of handling the
resolution and refresh rate selected.
T1
T2
T3
R1
R2
R3
T1 R1 RJ45 Jack Use a CAT 5e or CAT 6 cable to connect Tx to Rx
T2 R2 HDMI connector
[T2] Connect to an HDMI source
[R2] Connect to an HDMI display
T3 R3 LED Indicator
[T3] Green: Power on / Blue: Link OK
[R3] Red: Power on / Blue: Link OK
P Power Supply Apply power to either the Tx or Rx unit
P
P
Grounding
Grounding
Grounding
To prevent damage to the product or any connected
devices, and to improve audio/video signal quality, it is
recommended to ensure that the extender systems are
properly grounded.
Grounding
Transmitter (Tx)
Receiver (Rx)
Loading...