Server 88717 Service Manual

Eco Pump

MODEL: BP-1

88717

™

Thank You

...for purchasing our Eco Pump™.
This quality, NSF listed pump delivers precise
portions and is a reliable alternative to the constant
expense of disposable pumps.

CONSISTENT PORTIONS—SERVE BETTER

PARTS FOR PUMP 88717

HEAD
ASSEMBLY
88718

DISCHARGE
TUBE

LOCKING COLLAR

PISTON

SEAL ASSEMBLY

83003

PINCH VALVE

88202

LID

88041

PUMP DELIVERS
1 OZ PORTIONS

To reduce portion, add

GAGING COLLAR(S)

88313 Small collar: 1/8 oz reduction
88204 Medium collar: 1/4 oz reduction
88205 Large collar: 1/2 oz reduction

COLLAR(S) USED PORTION RESULTS

None 1 fl oz
1 Sm 7/8 fl oz
1 Med 3/4 fl oz
1 Lg 1/2 fl oz
1 Lg + 1 Med 1/4 fl oz
1 Lg + 1 Med + 1 Sm 1/8 fl oz

FOOD
EQUIPMENT
LUBRICANT

40179

CYLINDER
ASSEMBLY
88719

Page 2

SPRING

88395

STAINLESS STEEL BALL
1/2" DIAMETER

06022

(Ball snaps inside cylinder
and can always remain
installed, even during cleaning.)

11" BRUSH

82049

21" BRUSH

82526

SAFETY

According to food and safety regulations, most
foods must be stored and/or served at certain
temperatures or they could become hazardous.
Check with local food and safety regulators for
specific guidelines.

Be aware of the product you are serving and the
temperature the product is required to maintain.
Server Products, Inc. cannot be responsible for the
serving of potentially hazardous product.

DISASSEMBLY

DISASSEMBLE AND WASH
ALL PARTS PROPERLY BEFORE USE.

During disassembly, collect small parts
in a container to prevent loss.

REMOVE PUMP

1

from container of product.

SEPARATE CYLINDER,

2

LID & HEAD

Loosen locking collar to release.

REMOVE SPRING

3

FROM CYLINDER

IMPORTANT

Clean, rinse, sanitize, and dry parts daily or regularly
to comply with local sanitization requirements.

NSF International lists this pump as:
“Not acceptable for dispensing potentially
hazardous foods.”

See page 4.

REMOVE PINCH VALVE

4

from head assembly.
Pinch gently and twist
to pull valve out.

REMOVE SEAL

5

from head assembly by pressing it
down and off with thumb.
Do not use a sharp tool.

REMOVE O-RING

6

FROM SEAL

REMOVE ANY

7

GAGING COLLAR(S)

if necessary for cleaning.

Page 3