Server 87773 Service Manual
ConserveWell
™
WITH COUNTDOWN TIMER
MODEL: CW-T
120V USA
87773
Thank You
...for purchasing our ConserveWell™
Heated Utensil Holder. This unit holds
serving utensils above 140°F, keeping them
safe while saving water, energy and money.
Countdown timer ensures scheduled change-outs.
SAVE WATER. SAVE MONEY.
YOU WILL NEED:
QUICK START
• Screwdriver
• Appropriate fasteners
PRACTICE SAFETY.
WASH ALL PARTS PROPERLY BEFORE USE.
INSTALL UNIT
1
Select wall location or sturdy vertical surface for mounting.
Determine proper mounting hardware you will need to supply.
Locate mounting holes approximately 10-5/8" apart.
Key slot mounting brackets make removal easy.
INSERT WATER PANS
2
Fill each pan with approximately
3/4 quart of HOT water.
See page 5 for water temperatures.
Insert both pans of water into basin.
Pour water into pans only.
YES
Proper water
levels in PANS
or
See page 4.
3
4
5
Page 2
NO
Never pour water
directly into
BASIN
PLUG CORD INTO
POWER SOURCE
TURN UNIT ON
PRESS RESET TO START
countdown cycle.
Timer is factory programmed
for 2 hour cycles.
ONLY USE WITH UTENSILS SAFE IN HIGH TEMPERATURES
CAUTION-
BURNS MAY RESULT
Do not use liquid or gel-filled utensils.
Handles become extremely hot.
WHEN COUNTDOWN TIMER ENDS:
Alarm will beep.
Display will indicate “END”
PRESS RESET TO STOP ALARM
1
REMOVE & EMPTY PANS OF WATER
2
CAUTION- HOT
Unit, pans and water will be hot.
Take proper care while removing pans.
Carefully pour water down a drain.
REFILL & RETURN WATER PANS TO BASIN
3
Fill each pan with approximately
3/4 quart of new HOT water.
Insert both pans of water into basin.
Never pour water
directly into basin of unit.
Pour water into pans only.
PRESS RESET BUTTON
4
to restart the countdown cycle.
RESETTING COUNTDOWN TIMER
To replace water before countdown cycle completes:
PRESS RESET BUTTON to stop the timer.
CHANGE OUT WATER (See steps 2 & 3 above.)
PRESS RESET BUTTON again to restart timer cycle.
Page 3
Loading...