Page 1
Triple Squeeze Bottle Holder
Use with an IntelliServ® warmer;
lls the space of a 1/6-size pan.
MODEL SBH-3
87530
Includes (3) - 16 oz,
2.56" diameter,
high-density squeeze bottles
required for heated applications.
Thank You
for purchasing our squeeze bottle holder.
Finishing and platescaping is quick and easy
when warm toppings and sauces are within reach.
KEEP TOPPINGS WARM AND READY TO SERVE
BETTER
Page 2
SQUEEZE BOTTLE HOLDER
MODEL SBH-3
87530
INCLUDES 3
SQUEEZE BOTTLES
16 oz, 2.56" diameter,
high-density (required for heated applications)
For fast switch-out,
be sure to have extra
squeeze bottles on hand.
Order part number 86809
WASHER
86817
Page 2
87530 Squeeze Bottle Holder
™
ts into an IntelliServ
The 1/3-size warmer capacity
is easy to customize:
Stainless Steel FP-1/6 Pump, 86312
1 oz (30 mL)
1/6-Size, 6" (150mm) Deep Pan, 90089
2¾ qt (2.6 L)
1/6-Size Pan Lift-off Lid 90094
Stainless Steel 6" Ladle, 87213
1 oz (30 mL)
warmer.
PART
NUMBER
Page 3
SAFETY
According to food and safety regulations, most
foods must be stored and/or served at certain
temperatures or they could become hazardous.
Check with local food and safety regulators for
specic guidelines. Server Products, Inc. cannot
be responsible for the serving of potentially
hazardous product.
Be aware of the product you are serving and the
temperature the product is required to maintain.
Server Products, Inc. can not be responsible for
the serving of potentially hazardous product.
CLEANING
WASH
1
all parts with dishwashing detergent
and hot water.
RINSE
2
all parts thoroughly with clear water.
SANITIZE
3
all parts according to local sanitization
requirements. All parts in contact with food
must be sanitized.
AIR DRY
5
all parts fully.
IMPORTANT
Clean, rinse, sanitize, and dry parts daily or regularly to
comply with local sanitization requirements.
YES!
Use dishwashing
soap and hot water
Squeeze bottles
are dishwasher safe
CARE OF STAINLESS STEEL
This holder is constructed of
stainless steel— one of the best
materials for food serving and
storage.
If you notice corrosion beginning on any stainless
steel surface, you may need to change the
cleansing agent, sanitizing agent, or the cleaning
procedures you are using.
• A mildly abrasive nylon or brass brush may
be used to remove any stubborn food or
mineral deposits on interior surfaces of unit.
• Fully rinsing and drying all parts can help
prevent corrosion. Elements and minerals in
tap water can accumulate on stainless steel
parts and create corrosion.
• Do not use abrasive, caustic or ammonia
based cleansers.
• Do not use products containing acids,
alkalines, chlorine, or salt. These agents can
corrode stainless steel.
• Do not use metal scrapers or cleaning pads
that could scratch surfaces.
Page 3
Page 4
SERVER PRODUCTS
LIMITED WARRANTY
This Server product is backed by a two-year
limited warranty against defects in materials and
workmanship. See Server-Products.com for details.
NEED HELP?
GENERAL SERVICE,
REPAIR OR RETURNS
Before sending any item to Server Products for service,
repair, or return, contact Server Products customer
service to request a Return Authorization Number.
Merchandise must be sent to Server Products with this
number. Service is extremely prompt. Typically, units
are repaired and ship out within 48 hours of receipt.
Merchandise being returned for credit must be in new
and unused condition and not more than 90 days old
and will be subject to a 20% restocking charge.
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
Chat with us!
262.628.5600 | 800.558.8722
Page 4
Please be prepared with your Model, P/N and
Series located on the lid or base of the unit.
Example:
MODEL
XXXX
P/N
#####
Manual #EM_01915_RevB 020322
SERIES
##X ##X
Loading...