Server 07937 Service Manual

Server Express
Pumps

MODELS:

07405

07634
07937
07988

07959

Used with pouches
up to 1½ gallons.

™

Thank You

...for purchasing our Server Express™ Pump.
Express™ pouched condiment systems are sealed
and sanitary, achieve excellent evacuation and have
only a few parts for easy clean-up.

SIMPLIFY CONDIMENT MANAGEMENT— GO POUCHED

ASSEMBLY

INSERT PINCH VALVE

1

into pump housing.

TIP: Squeeze the pinch valve
open before installation to
ensure it isn’t stuck shut.

INSTALL DOME

2

Press dome into
housing fully.

Ensure valve flap
covers bottom
opening.

INSTALL TUBE

3

Lubricate with a small amount of clean water.

Rotate and position until both pegs on
housing fit into holes on tube.

WASH ALL PARTS
PROPERLY BEFORE USE.

Wrap loop
around lower
opening to
secure dome.

See page 3.

4

5

Page 2

INSERT CONNECTOR

Lubricate with a small amount of clean water.

Rotate and position until both pegs on
connector fit into holes on tube.

Connector must point away from end of
discharge tube.

INSERT DISCHARGE FITTING

into pump housing discharge tube.

Place loop of fitting around peg on end of
discharge tube to secure.