Serialio KeyBatch BR2 Quick Start Manual

1. Charge scanner

Connect KeyBatch™ BR2 scanner to a powered USB port for about 4 hours, or until LED shows

green.

2. Choose mode

The default setting of the KeyBatch™ BR2 scanner is USB SerialMagic mode.

USB SerialMagic Mode:

1. While the scanner is not connected,

scan the following barcode:

ÉÁC01mËÍ

USB SerialMagic

(You should hear some beeps.)

2. Install SerialMagic software for

Windows (File is available from

Serialio.com>Downloads>SerialMagic
Downloads)

3. Connect the KeyBatch™ BR2 to your

computer’s USB port.

4. Inside SerialMagic, click “Add.” Then,

select “Cabled connection,” select the
KeyBatch™ scanner, and click “Next.”

Select the COM port through which your

scanner is connected, and click “Next.”
Select “Like a keyboard…,” and click
“Next.”

5. You are now ready to use your

KeyBatch™ scanner with SerialMagic!

USB Keyboard Mode:

1. While the scanner is not connected, scan

the following barcode:

ÉÁSUQËÍ

USB Keyboard

(You should hear some beeps.)

2. KeyBatch™ BR2 scanner will beep when it is

plugged into a USB port. You are now ready
to scan to cursor location!

Your serial solution provider on
over 500 mobile device models

Quick Start Guide

715 Discovery Blvd. Ste. 510

Cedar Park, TX 78613

Tel: [phone]
Fax: [phone]

For sales inquiries:

[e-mail]

For technical support:

[e-mail]

For complete KeyBatch™ BR2 documentation, visit serialio.com/support/Scanner/KeyBatch/index.php

1

Device Specifications

Physical Characteristics

 W x D x H: 30mm x 62mm x 16mm (1.18” x

2.44” x 0.63”)

 Weight: 28.35g (1oz)

Power Source

 Internal rechargeable Lithium-Polymer

battery 3.7VDC, 150mAH

 Expected Battery Life: 1000 scans
 Charges via standard USB port

Operating Temperature: 10 - 40° C (14 - 104° F)
Ambient Light Rejection

 Fluorescent: 4,000 lx max
 Direct Sunlight: 80,000 lx max
 Incandescent: 4,000 lx max

Warranty: One year
Maximum Barcode Digits: At least 70 digits
Laser: JIS-C-6802 Class 2, IEC 60825-1 Class 2, FDA

CDRH Class II

Operating System Support

 Android tablets that support USB

keyboards

 Linux – USB keyboard
 Mac OS X – USB keyboard
 Windows7/2008/Vista/XP/2003/2000 –

USB keyboard, SerialMagic, and Scan List
Magic

Bar Code Symbologies Decoded

 All standard 1D symbologies:

JAN/UPC/EAN incl. add on, Codabar/NW­7, Code 11, Code 39, Code 93, Code 128,
GS1-128 (EAN-128), GS1 DataBar (RSS),
IATA, Industrial 2of5, Interleaved 2of5,
ISBN-ISSN, Matrix 2of5, MSI/Plessey, S­Code, Telepen, Tri-Optic, UK/Plessey

Enable batch mode (save

scans to scanner memory):

ÉÁ]DTME+P!ËÍ

Store Scans

Save scans and timestamp to

scanner memory:

ÉÁ]DTME+Q)ËÍ

Store Scans and Timestamp

Send scans from scanner

memory:

ÉÁ+-MDLD-+!ËÍ

Send Scans

Erase scans from scanner

memory:

ÉÁ+-MCLR-+~ËÍ

Erase Scans

Send scan followed by a new

line:

ÉÁRYRZ1MGËÍ

CR after Scan

Disable batch mode (do not

save scans to memory):

ÉÁ]DTMDQËÍ

Real-Time Only

Send data only (no prefix, no

suffix):

ÉÁMGPR9ËÍ

Data Only

Send barcode value then CR

(Use for Safari iOS):

ÉÁRZ7QMG/ËÍ

Data then CR

Send barcode value then

ENTER (use for Safari OS X):

ÉÁRZ1MMGjËÍ

Data then Enter

Send barcode value then

TAB:

ÉÁRZ7HMGiËÍ

Data then Tab

Send barcode value then

COMMA:

ÉÁRZ5MMGzËÍ

Data then Comma

Send barcode value for Grid-

In-Hand® Mobile Grid:

ÉÁRY1BRZ7HMGYËÍ

Mobile Grid KB

Control Codes for Batch Mode

For complete KeyBatch™ BR2 documentation, visit serialio.com/support/Scanner/KeyBatch/index.php

Control Codes for Keyboard Mode

2