serenelife SLSPSKT200 User manual
SLSPSKT200
2 Pcs. Portable Mono Solar Panel Starter Kit
100W with 3 ft. 11AWG Cable Set
and 30A PWM Controller with LCD Screen
Please read the manual carefully before installing or operating the Portable
Mono Solar Panel Starter Kit to prevent personal injury or damage to the
components. Contact Technical support for any questions concerning the
installation.
INTRODUCTION
This manual provides the installation and operation instructions for users:
• Please carefully read this manual before installation, operation and maintenance
of our solar system. This manual includes all the important information and data,
and in order to guarantee the good performance of this system, please strictly
follow the instructions in this manual.
• We are not responsible for any consequences caused by wrong installation or
operation which does not correspond to this manual.
• Please keep this manual for future reference. In case of any questions or need
further assistance, please contact us or our agencies as well.
STORAGE & OPERATING CONDITIONS
Storage
To avoid potential dangers, the following notes must be followed:
• Storage environment should be ventilated and dustless.
• Relative humidity is less than 90%, and no water droplets.
• Keep away from re or any corrosive substances.
Operating Conditions
Operating Temperature
• Controller and inverter: -20°C - 50°C (-4°F - 122°F)
• Solar panel: -40°C - 85°C (-40°F - 185°F)
SAFETY PRECAUTIONS
•
Installation stas should use insulating equipment (e.g. insulating shoes, insulating
gloves) to avoid electric shock.
• Solar panel is heavy and should always be handled by two people, and it contains
glass, which can be easily broken if mistreated, such as place heavy loads or drop
objects on its surface. .
• When working at height, appropriate protective safety equipment as recommended
by local safety codes (e.g. hard hat, scaolding, safety rope) should be used.
• Do not install the module if the back sheet or glass is damaged because there is
an electrical and re risk.
• Do not attempt any installation in adverse weather conditions (e.g. high winds,
rain or when ice or snow is present).
www.SereneLifeHome.com
1
PACKING LIST
V
AH
Mounting brackets
100W Solar Panel A *1
100W Solar Panel B *1
Extension lead
11AWG * 20ft
INSTALLATION WITH ROOF RACK
Z-shape bracket
Wire xer
*2set
*10pcs
Fuse
15A*1pc
1 2 3
Double nut
*4pcs
aluminum plate
*4pcs
4 5 6
Controller
30A*1pc
Battery lead
11AWG * 8ft
Ø8 Bolt (M8*16)
*4pcs
ONE SET of mounting
bracket included
Ø8 Nylon lock nut
*4pcs
Ø8 Bolt spring washer
*8pcs
Ø8 Bolt at mat
Ø8 Bolt (M8*25)
*12pcs
7 8
Ø8 Big Bolt at mat
*4pcs
www.SereneLifeHome.com
*8pcs
2
Step1:
The connection of solar panel and Z-shape bracket.
4
8
INSTALLING
HOLE
5
3
Step2:
Connection of Z-shape bracket, double nut aluminum plate and roof rack.
1
6
7
5
2
www.SereneLifeHome.com
3
Roof Rack
Step3:
System Wiring as follows
100W Solar Panel A *1 100W Solar Panel B *1
See controller manual
P6-P8
Controller
Fuse
OutputBattery
INSTALLATION WITHOUT ROOF RACK
Refer to the above installation guide, and double nut plate are not used.
2
APPLICATION CASES
Our solar system can be widely used in RV, 4WD, tourist car, yacht and roof power
generation system, etc.
www.SereneLifeHome.com
4
Loading...