Page 1
SLPAC14
Portable Air Conditioner
Compact Home A/C Cooling Unit with Built-in Dehumidifier
& Fan Modes, Includes Window Mount Kit (14,000 BTU)
Page 2
Read all instructions carefully before setting up and operating the unit.
Please keep this instruction manual for future reference. This manual is designed
to provide you with important information needed to setup, operate, maintain
and troubleshoot your portable air conditioner. Failure to follow these instructions
may damage and/or impair operation and void the warranty.
CONTENTS
Attention Points
Features and Parts
Control Panel
Operation Method
Installation
Drainage Operation
Maintenance
Wi Operation Instruction
Troubleshooting
Features and Technical Specs
3
4
5
8
9
12
12
14
29
32
www.SereneLifeHome.com
2
Page 3
Attention Points
For the health of you and your family, please read the following carefully
before using the unit
Requirement:
• Please place the unit in a at and dry place.
Keep the air conditioner 50cm. away from the surrounding objects.
• The power supply of the air conditioner shall comply with the safety specications
for the use of the ground, and ensure reliable grounding.
• After the air conditioner is installed, make sure that the plug is intact and rmly
inserted into the socket.
• Keep the air inlet and outlet unobstructed.
• If the power cord is damaged, in order to avoid danger, it must be replaced by
professional personnel of the manufacturer's maintenance department or similar
departments.
• This unit should be away from gasoline, stove, or other combustibles and heat
sources.
• Always place the wires orderly to avoid tripping or pulling the plug out.
• Use the power cord correctly. If it is damaged, please turn o the air conditioner
immediately and pull out the plug. To avoid danger, please nd professional
maintenance department or personnel for maintenance.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
www.SereneLifeHome.com
3
Page 4
Prohibition:
• This air conditioner is for household use only and should not be used in other
occasions.
• Do not install the unit in the laundry room or other places with water and
humidity.
• Do not turn on or o the unit by plugging in or pulling out the plug.
• Do not put things on this unit.
• Do not put anything into the air inlet and outlet.
• Do not use insecticide sprays or other combustible substances near the air
conditioner.
• Do not splash oil or water into the air conditioner.
• Do not use water to clean the air conditioner. Wipe it with a semi wet soft cloth.
• Do not use chemical solvents such as benzene, gasoline, alcohol, etc. to wipe the
air conditioner. Please use neutral detergent if it is dirty.
Suggestion:
When the ambient temperature is higher than 40°C/104°F in cooling mode or lower
than 7°C/44.6°F in heating mode, it is not recommended to use this unit.
Features and Parts
Features:
• A new generation of condensate self evaporation design, environmental
protection and energy saving.
• L-type evaporator design, more compact and ecient body.
• Super high loading quantity, greatly saving logistics costs.
• The whole unit is miniaturized and compact.
• The exhaust hose assembly and other accessories are easy to install.
• Self diagnosis function and 24-hour power on / o timing function.
• Universal wheel design, easy to move.
• Silent design, suitable for sleeping.
• Low noise and strong wind.
• Three minute delay to restart the compressor automatically.
www.SereneLifeHome.com
4
Page 5
Parts Name:
1. Control Panel
2. Wind Guide Bar
3. Exhaust Hose Assembly
4. Casters
5. Handle
6. Air Intake Grille
7. Power Cord
8. Filter
9. Air Outlet
10. Power Cord Buckle
11. Drainage outlet
2
1
5
8
9
10
6
3
7
Figure 1 Figure 2
4
11
Control Panel
Note:
If the machine is shut down in the cooling or heating operation state, it needs
to wait for three minutes before it can be turned on automatically.
HIGH
MID
LOW
TIMER SPEED MODE POWER
Figure 3
°C
Hr
°F
COOL
FAN
DRY
www.SereneLifeHome.com
5
Page 6
Panel Description
1. Button and Display
POWER:Press this key to turn the unit on or o.
MODE: Press this key to select cool mode, fan mode or dry mode when starting
or timing starting. When the mode is selected, the corresponding ndicator
lights up.
UP/DOWN: Press the key at cool mode to increase/reduce the setting
temperature; press it at timing mode to adjust time; press Up and Down keys
simultaneously to switch Fahrenheit and Centigrade degree temperature.
SPEED: Press this key to select dierent wind speed, low, medium and high
cycle selection, and the indicator light corresponding to the selected wind
speed will be on.
TIMER: Press this key to enter the timing setting time state, and the indicator
light is on.
88 DISPLAY: In cool mode, the pattern shows the set temperature. In fan and
dry mode, the pattern shows the indoor temperature. When °C is displayed, it
means that the current temperature is centigrade; when °F is displayed, it
means that the current temperature is Fahrenheit.
2. Remote control operating instructions
The operation interface of the remote control is as follows:
Figure 4
Cooling only
remote control
www.SereneLifeHome.com
6
Page 7
The key operation instructions of this high quality remote control are as follows:
1.POWER:Press the key to turn ON/OFF the unit.
2. MODE: Press the key to choose cool, fan and dry mode.
3. UP: Press this key to increase the temperature and timing settings.
4. DOWN: Press this key to decrease the temperature and timing settings.
5. FAN: Press this key to cycle select the output wind speed between the high,
middle and low wind speeds.
6. TIMER: Press this key to set the timing.
7. SWING: Press this key to turn on or o the pendulum.
The air volume of the air outlet can be blown out at dierent angles.
8.:Press this key to switch between centigrade and Fahrenheit.
3. Multiple protection functions:
Frost protection function
In cool mode, dry mode or economic energy-saving mode, if the temperature of
the exhaust pipe is too low, the product will automatically enter the protection
state. If the temperature of the exhaust pipe rises to a certain temperature, it can
automatically return to normal operation.
Full water protection function
When the water in the water tray exceeds the warning level, the machine will give
an alarm automatically, and the LCD temperature display area will display "FL".
At this time, you need to connect the machine or the water outlet with the drainage
pipe, move it to the sewer and other drainage places to discharge the water
(see the "drainage instructions" at the end of this chapter for detailed drainage
methods), and the machine will automatically return to the original working state
after the water is discharged.
Protection function of compressor
In view of the life protection of the compressor, the machine has a 3-minute delay
protection function after the compressor is shut down.
www.SereneLifeHome.com
7
Page 8
Operation Method
Time Setting
1. Setting of timing shutdown
In the running state of the machine, press the timing key, the timing LED will be
on, and the 88 display will ash "0" for 5 times. At this time, press the up and
down keys to adjust the time from 1 hour to 24 hours, and change it for 1 hour
for each up or down adjustment. When the set time is up, the machine will shut
down automatically.
2. Setting of timing start up
When the machine is in standby mode, press the timing key, the timing LED will
be on, and the 88 display will ash "0" ve times. At this time, press the up and
down keys to adjust the required timing time, which is the same as timing
shutdown. When setting the time, you can select the working mode after starting
the machine. If you select the cooling or heating mode, you can adjust the set
temperature at the same time. When the set time arrives, the machine will start
automatically and operate in the selected working mode.
3. Change the setting time
In the process of timing operation, if you want to change the existing timing
time, you can press the timing key once. At this time, the 88 display will ash to
display the remaining timing time. During the ashing period, press the up and
down keys to increase or decrease the timing time on the basis of the original
time. If you press the timer key again while ashing, the set time will be canceled,
that is, exit the timer.
Operation mode
1. Cool mode
• Press the mode key to select the refrigeration mode in the start up or timing
start up state. At this time, the corresponding LED on the panel is displayed.
• Press the up and down keys to set the appropriate temperature.
The setting range is 16~30°C (60-86°F). Each time you press the up or down
key, the temperature will rise or fall by 1°C or 1°F.
www.SereneLifeHome.com
8
Page 9
• Press the wind speed key to select the appropriate wind speed, which can cycle
to select low, medium and high wind.
• After the cool mode is selected, press and hold the up key and timing key on
the operation panel at the same time to enter the sleep mode, and the wind
speed of the upper and lower fans is forced to be set to low wind.
To cancel sleep, press the key combination again or change the mode to cancel
the sleep function.
2. Dry mode
• Press the mode key to select the dry mode in the start up or timing start up
state. At this time, the corresponding indicator light is on.
• Temperature and wind speed are not adjustable.
3. Fan mode
• Press the mode key to select the fan mode in the start up or timing start up
state. At this time, the corresponding indicator light is on.
• Press the wind speed key to select the appropriate wind speed, which can cycle
to select low, medium and high wind.
• The temperature is not adjustable.
Note:
1. When the full water indication is displayed, the machine will stop working.
You should drain the water in time, and then the machine can start up and run
normally.
2. In dry and fan mode, you may not use the exhaust duct.
3. If your room is facing the sun, please close the curtains.
Installation
1. Select installation location
When the machine is installed in a at and
dry place, 50 cm space must be left around
the machine to make the air ow smoothly.
As shown in Figure 5, the best installation
distance is 50 cm from the back of the machine
body to the wall and 90 cm from the air outlet
to the ground.
9
Figure 5
10
www.SereneLifeHome.com
50cm
90cm
9
Page 10
2. Assembly method of exhaust pipe
• Connect the exhaust pipe assembly with the
round joint (as shown in Fig. 6).
• Fix the circular end of the connected exhaust
pipe assembly at the air outlet of the machine
according to the direction shown in Fig. 7.
Figure 6
• Connect one end of the oblate joint of the
connected exhaust pipe assembly with the
window sealing plate.
• Install the seal to the nearest window.
Make sure there is no obstacle within 50 cm
outside the window to ensure smooth exhaust.
Note:
The length of the exhaust duct is between
60cm and 170cm (including the adapter).
We suggest using the minimum length, which
can save energy for you.
Figure 7
• The length of the exhaust duct is specially designed according to the speci-
cations of the air conditioner. Do not use exhaust pipes of dierent lengths or
materials, which may cause failure.
Note: the above exhaust pipe and installation method are standard
conguration of the company, subject to the actual object.
3. Installation of window sealing plate
Window sealing panels are designed to meet most standards for horizontal
or vertical windows. The steps are as follows:
1. Measure the window size;
2. Adjust the length of the window sealing plate to adapt to the size of the
window;
3. After the length of the window sealing plate is determined, the length size is
xed with screws;
www.SereneLifeHome.com
10
Page 11
vertical window
horizontal window
Figure 8 Figure 9
4. Install the xed window sealing plate on the window;
5. Clip the exhaust pipe assembly (at end of exhaust nozzle) into the window
sealing plate assembly, and use the Screw xation.
4．Installation diagram
9
Figure 10 Figure 11
10
www.SereneLifeHome.com
11
Page 12
Drainage Operation
• When the refrigeration mode or drying mode is operated in wet weather, there is
a lot of condensed water. When the water level of the water receiving tray reaches
a certain position, the water full alarm will be issued to stop the compressor.
The indicator of full water on the display will be on, and the alarm will sound at
the same time until the water level of the water receiving tray is lower than the
alarm level or the water of the water receiving tray has been drained manually.
When the machine works normally, it will return to normal.
• Whenthemachinesendsoutthefullwateralarm,pleasedrainthewaterin
time.Youcanmovethemachinetoaplacewhereyoucandirectlydrain
water(suchastoiletorsewer),screwoffthenutandpulloutthewaterplug.
Drainthewater,installthewaterplugandnutbeforeuse.
Note:
When the water is full, please move the machine smoothly, otherwise, the water
may overow from the inside.
Figure 12
plug cap
Maintenance
Cleaning
Note: Please turn o the machine and pull out the plug before cleaning.
1. Clean the surface
Clean the surface of the machine with a duster or semi wet soft cloth.
Do not use chemical reagents, such as benzene, alcohol, gasoline, etc.
Otherwise, the surface of the air conditioner will be damaged, even the whole
machine will be damaged.
www.SereneLifeHome.com
12
Page 13
2. Cleaning of lter screen
• If the lter is blocked by dust, it will lead to
poor air circulation and reduce the eciency
of air conditioning.
• In the case of long-term use of air conditioning,
it is recommended to clean the lter every two
weeks.
1. Pull out the lter in the direction shown in
Figure 13.
2. Put the lter into the warm water
(about 40°C/104°F) with neutral detergent
to clean it, and then dry it in the shade.
Figure 13
Post Season Preservation
When the air conditioner is not used for a long time or after the season,
corresponding maintenance measures should be taken.
• Completely drain the water from the drain outlet of the water tray inside the
machine (tilt the machine body back slowly to pour out the water during the
drainage process), then adjust the working mode to the air supply mode, and
then press and hold the wind speed key for 5 seconds until the downdraft fan
works. Keep this working state for 2 ~ 3 hours. This method can make the body
dry and prevent mildew.
• Turn o the machine and pull out the power plug.
• Wind the wire tightly and put it in place.
• Remove the exhaust pipe and keep it properly.
• Cover the air conditioner with plastic bag and put it in a dry place.
9
• Take out the battery of the remote control and keep it properly.
10
www.SereneLifeHome.com
13
Page 14
WIFI OPERATION INSTRUCTION
Download and Install APP
Use your phone to scan the QR code below or search
“Smart Life” in application market to download and
install the App.
Registration
• If you don't have an App account, register an account or sign in with verication
code by SMS. This page describes the registration process.
• Tap to enter registration page
• The system automatically recognizes your country/area. You can also select your
country code. Enter the mobile number/E-mail and tap “Next”, as shown in the
picture 1.
• If you enter the mobile number, then enter the verication code in the message ,
as shown in the picture 2, and enter the password, tap "Conrm" to nish your
registration.
• If you enter the E-mail, enter the password as shown in the picture 4, and tap
"Conrm" to nish your registration.
Picture 1 Picture 2 Picture 3
www.SereneLifeHome.com
14
Page 15
SIGN IN WITH USER NAME AND PASSWORD
1. The system automatically recognises your country/area. You can also select your
country code. Enter the mobile number/E-mail and tap “Next".
2. Enter your registered mobile number or Email, and password to login.
SIGN IN WITH SOCIAL MEDIA ACCOUNT
If you have installed Facebook or Twitter in your smart phone, tap the corresponding
icons and then sign in the App after social network authentication.
SIGN IN WITH VERIFICATION CODE VIA SMS
1. Tap “Sign in with SMS verication”, to new page.
2. The system automatically recognises your country/area. You can also select your
country code by yourself.
3. Enter the mobile number and tap “Get” to get a message.
4. Enter the verication code in the message and tap “Login” to login the App.
9
10
www.SereneLifeHome.com
15
Page 16
FORGOT PASSWORD
To nd your password back, please follow the procedures:
1. Tap "Forgot password", as shown in the picture 1.
2. The system automatically recognizes your country/area. You can also select your
country code by yourself. Enter the mobile number/E-mail and tap “Next”, as
shown in the picture 2.
3. Enter the verication code in the message/E-mail, as shown in the picture 3, and
enter the new password, tap "Conrm" to nish.
Picture 1 Picture 2
Picture 3
CONNECT DEVICE
1. Plug the PAC, the PAC will be in stand by mode. (Do not turn on the unit until
the wi connection is successful.)
2. Press the SPEED button for 3 seconds to enter wi connect mode.
(Also use SPEED as reset button)
3. Enter the App, tap “+” in the upper right of the page to enter network connection
page, as shown in the picture.
4. There are two network connection methods (Normal mode and AP mode).
Normal mode is default. Users could tap the upper right corner to switch the
connection method to AP mode.
Notes: How to set indicator light as rapid ashing (normal mode) or slowly ashing
(AP mode).
www.SereneLifeHome.com
16
Page 17
1
3 s
FOR NORMAL MODE
1. Make sure the device’s indicator light rapidly ashes (2 times per second), tap to
go on to the next step (picture 1).
2. If indicator light is not rapidly ashing, tap “how to set indicator light as rapid
ashes” to view operation processes.
3. Select the Wi-Fi under which device is
working, enter password and tap “Conrm” to
enter network connection process, as shown
in the picture below (picture 2).
4. If you select normal mode to connect device
to the network, the App goes through the
processes as shown in the picture 3.
5. After the network connection is successfully,
the App page will be shown in the picture 4.
Picture 1
9
10
www.SereneLifeHome.com
17
Page 18
Picture 1 Picture 2
Picture 3
FOR AP MODE
1. Please make sure the device’s indicator light slowly ashes (1 time every 3 seconds),
tap to go on to the next step.
2. If indicator light is slowly ashing, tap “how to set indicator light as slow ashes”
to view operation processes.
3. Select the Wi-Fi under which device is working, enter password and tap “Conrm”
to enter network connection process, as shown in the picture 2.
4. After connecting with the hotspot, back to the network connection page to enter
network connection process. The App goes through as shown in the picture 3.
5. Picture 4 shows the App page when the network connection is successful.
Picture 1 Picture 2
www.SereneLifeHome.com
18
Picture 3
Page 19
Note:
If your App interface is shown
as picture 5, it means that the
network connection failed.
You could try by connecting
again or view help.
Picture 2
Picture 3
1. CONTROL DEVICE
After successfully conguring the devices, the smart
device will be shown on the home page. Tap to enter its
control page.
Note:
1. When device is online, it support short-cut operations.
2. When device is oine, it displays “Oine” and can be
controlled.
2. SMART LIFE SCENARIO
Smart life scenario supports that devices perform
corresponding actions under various conditions.
The main conditions include:
1. Temperature
2. Humidity
3. Weather
4. PM2.5
5. Air quality
6. Sunrise & sunset time
7. Device’s actions (such as turn on/o)
9
10
www.SereneLifeHome.com
19
Page 20
PERSONAL PROFILE
“Prole” page is where users could manage personal
information. The key information is as follows:
1. Personal information
2. Smart life scenario
3. Device Sharing:Displays the information of shared
devices.
4. Message center
5. F.A.Q
6. Entry to submit feedback
7. About
PROFILE
“Prole” page is for displaying personal account
information. You can change login password,
binding mobile number, set pattern unlock on
this page.
www.SereneLifeHome.com
20
PROFILE-PATTERN UNLOCK
Tap “Pattern unlock” to set your
pattern. After setup, you have to
enter your pattern to use the App.
Page 21
PROFILE-DEVICE SHARING
Add sharing:
As shown in the left picture, users could input a new
member’s mobile number and share the device with him.
The new member could then control the shared device.
Sharing sent list:
The list shows all members who are added by your account.
You can delete the member and delete the sharing by
swiping left.
Sharing received:
The list shows all devices that your account has received.
You can delete the sharing by swiping left.
9
10
www.SereneLifeHome.com
21
Page 22
MESSAGE CENTER
Including notications of new device and new sharing.
FEEDBACK
Entry where users could submit their feedback.
www.SereneLifeHome.com
22
APP’S OTHER RELATED INFORMATION INCLUDE:
1. Tap on “rate us”, App will be redirected to a corresponding
App market, where you could rate us.
2. Show App version number
Remark:
1. The pictures used in this wi section are iOS app interface.
Android version is a bit dierent.
2. Product and software update periodically, the number
and app interface in this manual are only for example.
No extra notication on further changes.
Page 23
AMAZON ECHO OPERATION INSTRUCTION
1. WHAT YOU NEED TO GET STARTED
Before using Echo to control your smart devices, make sure you meet the
following conditions.
1. Stable Wi-Fi network which could access to Amazon server.
2. An Echo device, including Echo, Echo Tap, or Echo Dot.
3. An Amazon account.
4. Smart Life app and a related account.
5. Smart devices.
2. ADD DEVICES IN SMART LIFE APP (REFER TO APP INSTRUCTION)
You can skip this part if you've already add some devices to your Smart Life
account, and in the meantime the devices' name are easily recognized.
2.1 DOWNLOAD SMART LIFE APP (REFER TO APP INSTRUCTION)
You can scan the QR code below to download the Smart Life app:
You can also search "Smart Life" in either App Store or Google Play to install the App.
2.2 REGISTER A SMART LIFE ACCOUNT AND SIGN IN THE APP
(REFER TO APP INSTRUCTION)
Open the Smart Life App, tap "Register" to register an account, then sign in.
2.3 ADD DEVICE AND CHANGE DEVICE'S NAME (REFER TO APP INSTRUCTION)
Sign in with the Smart Life account, add the device, then change device name
9
to a easily recognized word or phrase, like "bedroom air conditioner".
10
www.SereneLifeHome.com
23
Page 24
3. SET UP AMAZON ECHO AND ENABLE SMART LIFE SKILL
User can congure Echo through web or Alexa app.
Web conguration link: http://alexa.amazon.com/spa/index.html
Search "Amazon Alexa" in App Store or Google Play to install the app.
We take app conguration as an example. Conguration through web and
app are basically the same
3.1 SET UP ECHO WITH ALEXA APP
You can skip this part if your Echo is already set up.
1. Make sure your Echo device is energized.
2. Open the Alexa app by tapping the app icon on
your mobile device.
3. Type in your Amazon account and password, then
tap "SIGN IN".
4. Tap the hamburger menu on the top left corner,
select "Settings", then tap "SET UP A NEW DEVICE".
www.SereneLifeHome.com
24
Page 25
5. Select your Echo model, choose a proper language, then tap "CONNECT TO WI-FI".
6. Press and hold the dot button on the top of your Echo device until the orange
light shows up, then tap "CONTINUE". When your phone is connected to Echo,
tap "CONTINUE".
9
10
www.SereneLifeHome.com
25
Page 26
7. Select a Wi-Fi to let Echo have the access to the internet. Type in the Wi-Fi
password, then tap "CONNECT". Echo may take several minutes to connect the
network.
8. Tap "CONTINUE" when Echo is connected to the network. After an introduction
video, tap "CONTINUE" to nish the setup.
www.SereneLifeHome.com
26
Page 27
3.2 LINK SMART LIFE ACCOUNT TO ALEXA
1. Tap "Skills" in the hamburger menu, then search "Smart Life". Select "Smart Life"
and tap "ENABLE" to enable the Skill.
2. You will be redirected to the account link page. Type in your Smart Life account
and password, don't forget to select the country/region where your account
belongs to. Then tap "Link Now" to link your Smart Life account.
The country/region, the account, and the password must match with the exact
content in Step 2.2.
9
10
www.SereneLifeHome.com
27
Page 28
4. CONTROL YOUR SMART DEVICES THROUGH ECHO
4.1 DISCOVER DEVICES
Echo needs to discover your smart devices before it controls them. You can say
"Alexa, discover devices" to Echo. Echo will discover devices which have already
been added in the Smart Life app. You can also tap "DISCOVER" to discover the
smart devices. Discovered devices will be shown in the list.
Note: Every time you change the device's name on Smart Life app.
Echo must re-discover before you control them.
4.2 CONTROL DEVICES BY VOICE COMMANDS
Now you can control your smart devices through Echo. You can use the
following commands to control your devices (e.g., bedroom air conditioner):
• Alexa, turn on/o bedroom air conditioner.
• Alexa, set bedroom air conditioner to 70°C or 158°F.
• Alexa, increase/decrease the temperature.
www.SereneLifeHome.com
28
Page 29
TROUBLESHOOTING
Before contacting a professional electrician, please check as follows:
TROUBLE CAUSE
Is the power o?
The air
conditioner
doesn’t work
The air
conditioner is
not cooling
The air
conditioner is
not standing
securely, too
much noise,
and shaking
while running
Is the plug not inserted?
Is the fuse blown or closed?
Is the time setting appropriate?
Is there a full water warning?
Is the air inlet and outlet
blocked?
Is there any other heating
source in the room?
Is the lter too dirty?
Is the temperature setting
appropriate?
Is the fan speed set to the
lowest gear?
Is the fuselage tilted?
Is the ground uneven?
SOLUTION
Normal phenomenon.
Plug in the power plug.
Replace the fuse or turn on the
power.
Change the time setting.
Pour out the water.
Remove the blockage.
Remove other heat sources.
Clean the lter screen.
Change the temperature.
Choose the right wind speed.
Put it on the ground.
Note:
In case of the following abnormal conditions, turn o the air conditioner and
pull out the plug, and then contact the professional electrician
• The fuse often breaks
• The power cord is overheated or the skin of the cord is exposed
9
• The body produces abnormal odor
10
www.SereneLifeHome.com
29
Page 30
Intelligent detection function
Error-detecting code Multi-functional defection
E1 Coil sensor sensing abnormal
E2 Abnormal perception of room temperature sensor
E4 Anti-freezing protection
FL The machine is in full water alarm state
Do not place the waste separately for other special purposes
www.SereneLifeHome.com
30
Page 31
FEATURES:
• Removes up to 50 pints/24 hours with Continuous Drain Option for Long
Unattended Operation
• Automatic Self-evaporation Technology
• Metal Control Box to Prevent from Fire and Exploding
• Rotary Compressor
• Universal Castors for Moving Freely
• Wi function
• Lightweight & Portable A/C Unit
• Compact Freestanding Room Air Conditioner
• (3) Operation Modes: AC Cooling / Dehumidier / Fan
• Hassle-Free, Quick Setup Cooling
• Simple Electric Plug-in Operation
• Convenient Wide-Area Climate Control Room AC Coverage
• Push Button Control Panel with LED Display
• Time, Temperature & Fan Speed Adjustment Settings
• Includes Universal Window Mount AC Exhaust Kit
• Removable & Washable Air Filter Screen
• Modern Style, Sleek Body Housing
• Energy Ecient: Low Power Consumption
• Low Noise Level Motor
• Rolling Wheels for Easy Portability
• Used for Home, Oce, School & Business Rooms
WHAT'S IN THE BOX:
• AC Unit
• Exhaust Hose
• Window Installation Plate
• Remote Control
9
10
www.SereneLifeHome.com
31
Page 32
TECHNICAL SPECS:
• Power Supply: 115V/60Hz
• Rated Power: 1220W
• Refrigerant Type: R32
• Cooling capacity (ASHRAE): 14,000 Btu/h
• Cooling capacity (DOE): 10,000 Btu/h
• Coverage Area: Cools Rooms up to 500 Square Feet
• Air Flow: 400 Cubic Meters / Hour
• Operating Modes: Cool / Fan / Dry (Dehumidier)
• Moisture Removal / Dehumidier: 1.5 Liters / Hour
• Operating Noise Level: 57 dBA
• Fan Speed Settings: Three Level, Low/Medium/High
• Temperature Unit Selectable: °C / °F (Celsius / Fahrenheit)
• Adjustable Timer Settings: Up to 24 Hours
• Construction Material: High Impact Polystyrene (HIPS)
• Battery Operated Remote Control, Requires (2) x ‘AAA’ Batteries, Included
• Power Cable Length: 4.3’ ft.
• Extendable Exhaust Hose Diameter: 5.9 in
• Extendable Exhaust Hose Max: 59 in
• Extendable Window Kit: 26.6-49.7 in
• Product Dimension (L x W x H): 32'' x 18.5'' x 15.4'' -inches
This product can expose you to a chemical or group of chemicals, which
may include ”Acrylonitrile” which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go
to https://www.p65warnings.ca.gov/.
www.SereneLifeHome.com
32
Page 33
9
10
www.SereneLifeHome.com
33
Page 34
Loading...