SereneLife SLARHKY100 User guide

Page 1
Page 2
IMPORTANT
After receiving the shipment, inspect the product thoroughly to ensure that it has been shipped with care. Before assembly make sure that the packaging contains all parts.
FEATURES:
Perfect for any Gameroom or Apartment
Space Saving
Stylish Design
Scratch Resistant and Durable Surface
Heavy Duty Plastic Corners
Digital LED Score Board
Safe and High-Quality Design
Sturdy Construction
Adjustable Foot Caps
Crossbar Leg Supports with Protective Corners
Built-in Score Tracker and Puck Dispenser
12V Fan Motor Pushes Air through the Surface for Smooth Gliding
Adjustable Levelers and Crossbar Leg Support for Stability
WHAT'S IN THE BOX:
54'' Air Hockey Table • (4) Pusher • (2) Puck
TECHNICAL SPECS:
Construction Material: MDF with PVC and Graphic
Pusher: 3’’ -inches
Green Pad: 2.9’’ -inches
Puck: 2 -1/8’’ inches
Hockey Table Thickness: 1/2’’ MDF -Inches
Hockey Table Dimensions (L x W x H): 54'' x 27'' x 32-1/2'' -Inches
www.SereneLifeHome.com
2
Page 3
PARTS LIST
PRE-INSTALLED PARTS
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Air Hockey Table. The table must be assembled upside down and then turned over on its legs once the assembly is completed. This game table is heavy, and turning it over will require at least two strong adults.
www.SereneLifeHome.com
3
Page 4
2. Remove all parts from the box and verify that you have all the listed parts as
shown on the parts list page. Carefully cut or tear the four corners of the box
so that the bottom of the box can be used as your work surface.
1
X 1 X 12 X 12 X 4 X 12 X 1X 4
X2
2
X2
3
12 A2 A3 P1 P2 P3 P4
X 4
P5
X 1
FIG.1
3. Place the Mainframe (#1) face down on a clean and at surface.
Attach the Right Leg (#2) and Left Leg (#3) to the Main Frame using three Leg
Bolts (#A2) , thee Leg Washers (#A3) per Leg. See FIG. 1.
www.SereneLifeHome.com
4
Page 5
4. Screw the Leg Levelers (#12) into the bottom of each leg.
4
X2 X 16
X2
5
A2
X 16
A3 P2
X 16
FIG.2
5. Attach the Leg Side Panels (#5) to the Legs using four Leg Bolts (#A2),
four Leg Washers (#A3) per Leg Side Panel.
6. Attach the Leg End Panels (#4) to the Legs using four Leg Bolts (#A2),
four Leg Washers (#A3) per Leg End Panel.
7. Lift the table assembly from the oor with two adults, turn it over,
and set table on its leg in the location where you will play.
www.SereneLifeHome.com
5
Page 6
Go back and make sure that all connections are tight.
DO NOT LEAN THE
TABLE ON ITS LEGS
HOLD TABLE
CABINET
DO NOT HOLD THE LEGS
CAUTION: Two strong adults are recommended to turn the table over as shown.
1. Lift the table o the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
6
X 1 X 1 X 4 X 2
X 2
8
X 2
9
10 11 A4 A5
X 2
www.SereneLifeHome.com
6
Page 7
10
6
A4
A5
FIG. 3B
9
FIG. 3C
8
www.SereneLifeHome.com
7
Page 8
FIG.3
8. Thread the wire from Goal Box (#10) through the openings of the end aprons and alongside the play-eld’s support beams to the opening of side apron and use Velcro Straps to x Scorer Wire. See FIG. 3A
9. Attach the Goals Boxes (#10) to each End Apron using two Screws (#A4). See FIG. 3.
10. Attach the Electronic Scorer (#6) to the side apron in the pre-drilled holes using two Screws (#A5). Insert the Scorer Wire into the Electronic Scorer (#6). See FIG. 3 & 3B.
11. Tear o the backside paper of the Felt Pad (#9) and stick them on the bottom of the Pushers (#8). See FIG. 3C.
12. Insert the Adaptor (#11) into the Connection box (#P5). See FIG. 3D.
www.SereneLifeHome.com
8
Connection box
Page 9
ELECTRONIC SCORER OPERATION
1. Reminder:
If connected in series, when you turn o the scorer, the fan will turn o at the
same time. Also when the scorer is unavailable in ve minutes, it will go to
sleep, then the fan will go to sleep and stop too.
2. When the “HOME” player scores a point, the “HOME” indicator will show 1 point;
when the “VISITOR” player scores a point, the “VISITOR” indicator will show 1
point.
3. The rst player to reach 10 points wins the game, and the winner’s indicator
will stay at 9 points and ash for several seconds.
4. After the game, you can press the “RESET” button to start a new game and
the HOME/VISITOR will indicate “0”.
Note:
1. You can press the “RESET” button at any time, to set the scorer back to the
beginning status.
2. You can press “ON/OFF” at any time to turn o the scorer.
Press “ON/OFF” again to turn it back on.
www.SereneLifeHome.com
9
Page 10
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Loading...