SLAIRMATR45
Hospital Bed Air Mattress
Bubble Pad Mattress with Electric Air Pump
Operating Principles
• Alternating pressure at a sucient rhythm avoids prolonged vascular
compression which is likely to cause tissue hypoxia.
• Alternating pressure adapts the mattress to the patient’s and their position.
Guidelines For Use
The traditionally accepted method of pressure sore control is to turn the client at
regular intervals and to observe the areas of risk regularly. Alternating pressure
mattress is intended to compliment this treatment, observation of the client and
turning when necessary shouldstill be considered as part of the treatment.
General
• For patients who are likely to spend more than 15 hours per day in bed.
• For patients who are classed as medium to high risk of developing pressure
ulcers.
Installation / Use
1. Unroll the mattress.
2. Position it on the bed.
3. Secure it to the bed with the xing straps.
4. Hang the compressor (pump) at the end of the bed (foot end) using the hooks.
5. Connect the mattress feed pipes to the compressor (pump) connector by
matching the appropriate outlets.
6. Connect the electrical power supply cable to the compressor (pump).
7. Guide it along the bed to the mattress plug socket and plug in
8. Press switch to turn on the compressor (pump).
9. Before positioning the patient onto the mattress, wait until the mattress has
been fully inated.
10. Select the pressure corresponding to the patient’s morphology.
Safety Measures
• DO TAKE CARE when operating this electrical equipment.
• DO NOT leave connected to electrical supply when not in use.
• DO NOT expose the equipment to excessive humidity.
• DO NOT use corrosive cleaning products such as industrial degreasers or acetic
solvents.
• DO NOT attempt to relocate this equipment whilst connected to the
electrical supply.
Cleaning / Disinfection
Compressor (Pump):
• DO TAKE CARE to disconnect from the electrical supply before attempting to
clean.
• DO TAKE CARE to use a cloth impregnated with a mild detergent solution.
• DO TAKE CARE to follow manufacturers solution concentrations
• DO TAKE CARE not to exceed manufacturers recommendations before
wiping o cleaning solution.
Use cloth with a detergent product solution or a surface detergent / disinfectant
with CE mark following the usage concentrations recommended by the
manufacturer follow the endurance times.
Maintenance
Compressor (pump) maintenance operations must be strictly carried out by a
authorized technician and trained by the importer.
Features:
• Medical Grade Bubble Pad Air Mattress
• Breathable Air Channels for Maximum Back Comfort
• Easy Set-Up: Automatic Air Pump for Inating and Deating
• Micro Air Holes Prevents Bed Sores, Diuse Sweat and Back Pressure
• Lightweight, Portable and Easy-to-Store
What’s in the Box:
• Air Mattress
• Electric Air Pump
• Puncture Repair Kit
• Power Cord
Technical Specs:
• Pressure Range: 70-130mmHg
• Air Ouput: 6-7 Litres/min
• Cycle Time: 6 min
• Mattress Minimum Support Weight: 286 lbs.
• Mattress Maximum Support Weight: 330 lbs.
• Construction Material: Medical Grade PVC
• Material Thickness: 30mm
• Number of Air Cells: 130 Pcs.
• Air Mattress Dimensions: 78.74’’ x 35.43’’ x 2.76’’ -inches
• Air Pump Power Supply: 110/220V
• Sold as: 1
www.SereneLifeHome.com
2 3
www.SereneLifeHome.com
Loading...