Page 1
Air Purifier
Instruction Manual
Model: PSLAPU20
Page 2
Please read this instruction carefully before operating the machine, and properly keep this instruction.
Notice & Warnings
Pull out the plug when not using for a long time.
Please take off the packing polybag of the filter before using the machine.
Do not use the air purifier in the kitchen or other cooking areas.
Do not block the airflow inlet and airflow outlet.
Place the unit at least 1.5 meters from electrical appliances, such as television and computer.
Do not place the unit near curtains or soft linen / materials / textiles.
This machine is not a toy. Keep out of the reach of children and pets to avoid damage / accidents.
This machine is only suitable for indoor, dry environment use. Do not use outdoors.
Unplug the unit when cleaning and changing the filter.
Do not pour water on the machine, or allow the unit to get wet.
Place the machine tables and flat surfaces when in use.
The unit cannot get rid of hazardous chemicals or carbon monoxide.
Do not place the unit near heat generating appliances, for example a stoves, radiator, heater.
Do not attempt to repair this product by yourself. Refer to qualified service personnel.
Inspect the machine and clean dust and scale regularly, replace the filter parts timely, or the
purify effect will not be optimal.
The appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction.
Children should be supervised to ensure that they do not play with the appliance.
Parts of Air purifier
Control panel
Pre-filter sponge
Bottom cover
Aroma box
Air outlet
Power jack
Multiplayer filter
Page 3
Operation Control
Ionizer
On/ Off
Fan speed
Control Panel
1. Insert the filter into the unit, ensure that you do not include the plastic filter bag when installing.
2. Connect the power , the machine will sound " Beep "
3. Press “ON/OFF”, the power indicator light will turn on. The machine be operating in “medium”
speed and start the ionizer function, the corresponding indicator light keeps shining.
4. Press the “Fan Speed” key, to adjust “Low”, “Medium” or “High” speeds.
5. Press the “Ionize” key, the ionizer stops. Press again to activate
and the corresponding indicator light keeps bright.
6. Press “ON/OFF” key again, and the machine will power off
All the indicator lights will also power off.
Replacing / Installing the Filter
Power off the unit
The filter should be replacement routinely (180 days)
1. Take off the bottom cover
● Let the air outlet face upwards, use two hands to hold the shell by each side, use your right and
left thumbs to press on the two sides of clasps, applying slight pressure.
Page 4
2. Change the filter
※ Remove any plastic bag before using a new filter.
● Remove the old filter from the machine.
● Install the thick filter screen first, then install the separate multi-layer filter. The black side of
multi-layer filter is upward.
Pre-filter spong
Multiplayer filter
Bottom cover
Mark the start
date of the
multilayer at
blank splace
※ Notice: the black side of multi-layer filter is upward and the white side close to the thick filter
screen.
Install the Bottom Cover
● Place the installed bottom cover horizontally. Let the top of bottom cover close to the base of the
shell housing, the clasps should point in the same direction as the air outlet.
● Press the shell housing securely onto the base unit.
Page 5
Add Aroma Oil
● Use your index finger to gently pull open the tray
● Drip your aroma oil into the aroma tray, then close the tray.
Cleaning
※ Ensure to un-plug the unit before cleaning.
Do not clean the unit using corrosive chemical or harsh cleaners
Clean with a wet cloth to clean the appliance body.
The front panel can be removed and washed with water.
Multi-layer filter can not be washed it should be replaced about every 180 days.
Troubleshooting
Besides professional technical maintenance people, do not attempt to open or repair this machine.
Please contact technical support or the service center for troubleshooting.
Loading...