For video setup guide and FAQs - Go to www.serenelifehome.com
IP Security Camera
User Manual
IPCAMHD62
Product Structure Diagram
RESET
RESET
Wired network
Status Light
Microphone
Wireless
Network
Status Light
POWER LED
loudspeaker
Ethernet
DC5V
Power Port
Lens
IR LED
Photosensitive
Sensor
Micro SD Card Slot
External Input
/Output
FN Button
Audio Input
/Output
Wireless
Antenna
Note: FN button has no function at this time
Andriod
iOS
‘SereneViewer’ APP Installation
A.Scan 'SereneViewer' APP QR code or search to download the app.
Don't forget to register your camera with us online to get a free 1 year
manufacturer's warranty!
Just go to www.SereneLifeHome.com
Setup an Account Username
Crea te your camera us ername
-6 characters min
-Do not use email address
Click Sign Up
Note: This us er name w ill be used to access
all of your cam eras from t he app or PC.
9:1 7
Password is 6-20 alphanumeric characters
User n ame must b e at l east
6-20 ch aracter s a nd must
begi n wi th a letter.
yanfa10
●●●●●●
●●●●●●
Back
Sign up
Crea te an account pas sword - C lick Sign Up
Note: This wil l be used to log in to al l of the cameras on y our account and c an be separate from
the camera pas sword
Add Camera to APP
1. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the
device ID QR code.
Phone
Router
Power
-Connect pow er, Ethernet cable and th e wirel ess antenna as ab ove.
-Wait 50 seconds for( ) on the camera to indicator flash green
-After scanning QR code - select the “Ethernet Connection” option
Method 1: Wired Setup
-Make sure you are in the same room as your wireless router and plug camera into power
-Wait 1-2 min for camera boot up, watch for the WiFi indicator on the front of the camera to
flash green and red alternating.
-If WiFi only flashes red - perform a hardware reset to change the camera back to Wireless
setup mode. If still only red follow “Method 1 Wired Setup”
Method 2: Wi-Fi connection
Connect to Your Network
Choose metho d 1 or 2 for setup
Power Outlet
Moden/Router
Web Access:
Passwords
After setting up your camera on the mobile phone - you can use your account
username and password to access the cameras from any device with an
internet browser
Log on to the website:
http://cloud.serenelifehome.com/
Should you happen to forget a camera's individual password you can reset it by
performing a hardware reset. Just use a pin to press and hold the reset switch
for 12 - 15 seconds. The camera will reboot and run through pan and tilt.
If you forget your account password you will need to register a new account
and pair the cameras again.
Accounts are never associated with an email address for password recovery
Loading...