This Chapter provides an overview of the Wireless USB Dongle's features and
capabilities.
Congratulations on the purchase of your new Wireless USB Dongle. The Wireless USB
Dongle provides a wireless network interface for your Notebook or PC.
Package Contents
The following items should be included:
• The Wireless USB Dongle Unit
• Quick Start Guide
• CD-ROM containing the on-line manual.
If any of the above items are damaged or missing, please contact your dealer immediately.
Features
• Compatible with IEEE 802.11b and 802.11g 2.4GHz
• Data transmission rate is up to 54Mbps
• Supports Turbo Mode which can enhance the data transmission rate within the specific
wireless network
•Supports WMM (Wi-Fi Multimedia) function (IEEE 802.11e QoS standard) and can meet
the requirement of the multi-media data bandwidth
•Supports 64/128-bit WEP, WPA (TKIP with IEEE802.1x) and WPA2 (AES with IEEE
802.1x) functions for high level security
• Supports CCS (Cisco Compatible Extensions) for the radio monitoring and fast roaming
• Automatic fallback which increases the data security and reliability
• Supports USB 2.0 interface
LED
Wireless USB Dongle
The Wireless USB Dongle has a single Link/Activity LED.
Link/Act LED
(Blue)
• On - Associated with the network.
• Off - Not associated with the network.
• Blinking - Data being transferred.
1
USB Wireless-G Adapter User Guide
Operation
You should install the supplied software on the CD-ROM before inserting the Wireless
USB Dongle.
If you have any form of the wireless utility beforehand, please uninstall it.
2
Chapter 2
Initial Installation
2
This Chapter covers the software installation of the Wireless USB Dongle.
Requirements
• Windows 2000/XP/Vista.
• Available USB port.
• CD-ROM drive.
• IEEE802.11b and IEEE802.11g wireless LAN.
Procedure
You should install the supplied software BEFORE inserting the Wireless USB Dongle.
1. Insert the CD-ROM into the drive on your PC.
2. The installation program should start automatically. If it does not, run the Setup.exe
program.
Figure 1: Start Installation
3.On the License Agreement screen, select I accept the terms of the license agreement. Click
Next.
3
USB Wireless-G Adapter User Guide
Figure 2: License Agreement Screen
4. Choose Install driver and Allnet WLAN Utility to install both the driver and Allnet utility
software, or Install driver only.
Figure 3: Setup Type Screen
5. Select either Allnet Configuration Tool or Microsoft Zero configuration Tool on the
following screen.
4
Initial Installation
Figure 4: Windows New Hardware Screen
6. On the following screen, click Install.
7. Click Finish to exit the Wizard.
8. Insert the Wireless USB Dongle firmly into USB port of the PC.
9. If the Wireless USB Dongle was installed properly, you will now have a new icon in your
system tray, as shown below.
Figure 5: System Tray Icon
5
USB Wireless-G Adapter User Guide
Wireless USB Dongle Icon Table
Connection to the Wireless USB Dongle is established. The length of
green color indicates the signal strength.
No connection to the Wireless USB Dongle.
The Wireless USB Dongle is unplugged.
10. You can double- click this icon to configure the Wireless interface. See the following
chapter for details.
6
Chapter 3
Using the Windows Utility
3
This Chapter provides Setup details for the AP mode of the Wireless USB
Dongle.
Overview
If using Windows, you can use the supplied utility to configure the Wireless interface.
To Use the supplied Windows utility for Configuration
• Double-click the Wireless Utility icon in the desktop.
This Chapter assumes you are using the supplied Wireless utility.
System Tray Icon
If the Wireless Utility program is running, you can double-click the icon in the System Tray or
right-click the icon and select "Launch Config Utility" to open the application.
Status Information
The menu options available from the System Tray icon are:
• Launch Config Utility - This will display the main screen of the Utility.
• Use Zero Configuration as configuration Utility - Wireless Zero Configuration (WZC),
is a service of Microsoft Windows which dynamically selects a wireless network to connect.
•Exit - Terminate the connection to the Wireless USB Dongle.
Figure 6: Wireless USB Dongle menu
7
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.