Sercomm SZPIR02 User Manual

SZ-PIR02 ZigBee Motion Detector Installation Guide

SZ-PIR02 is a PIR (Passive Infrared) sensor, which can detect levels of infrared radiation from objects in its range of view. This
Motion Detector is fully compatible with any products that are ZigBee-enabled.

Specification

Frequency 2.4 GHz
Battery Type DC3V CR123A * 1
Range Outdoor: Max 100M
Warm up Time 30 seconds
Rearm Timer 5 seconds ~ 3 minute
Adjustable Sensitivity Up to10m
Operating Temperature
Storage Temperature
Battery Life 2 Years
Dimensions (H xW x D) 84mm x 61mm x 39mm
Detect Range Distance: Max. 10M w/mounting height 2.5M @25°C

0 C to 50 C (32° - 122°F)

-20 C to 70 C (-4° - 158°F)

Angle: Max. 100 degree

Package Contents

Intallation

1. Detach the rear cover from the device.

2. Install the supplied battery properly.

1

3. Attach the rear cover back to the device.

Wall Mounting

Note: The device is suggested to be set at 12 degrees angle, which is the best mounted position for offering the 10M protection
area.

1. Mount the stand with the screws into the wall.

2. Detach the rear cover from the device.

3. Use the supplied screw to fix the rear cover and the stand.

4. Attach the device to the rear cover.

2