Sercomm SSM1R0 User Manual

SSM1R0-29 Motion Sensor Installation Guide

Frequency

1.9 GHz

Battery Type

CR123A * 1

RF Transmission Range

Outdoor: 100 Meters

Light Sensor

0~2500 Lux

Operating Temperature

0 C to 40 C (32° - 103°F)

Storage Temperature

-10 C to 60 C (14° - 140°F)

Battery Life

2 Years (Assume 40 events per day @25°C)

Dimensions (H xW x D)

90mm x 58mm x 33.2mm

Detect Range

Distance: Max. 10M (±1M) w/mounting height 1.8M @25°C
Angle: Max. 90 (±10) Degree

SSM1R0-29 is a PIR Motion (Passive Infrared) sensor, which can detect levels of infrared radiation from human body in its range
of view. It supports pet immunity, which is used to ignore the motion caused by animals and thus reduce the likelihood of false
alarms. The sensitivity of the sensor will disregard the motion caused by animals under 85 pounds, like a full-grown dog or small
cats.

These outstanding features of the sensor provides the professional security for protecting any home or business to save time,
money and deliver a great surveillance experience as well.

Specification

Package Contents

Intallation

1. Installation and wiring methods shall be in accordance with National Electrical Code, ANSI/NFPA 70.

2. Detach the mount bracket from the device.

3. Install the provided batteries correctly.

4. Attach the mount bracket back to the device.

1

2

Operation

1. Pairing Button

5. Battery Cover (Wall
Mount Bracket)

2. Pairing/Alarm Led

3. Battery

4. Tamper

 When the battery is installed, the Blue LED will be blinking for 90 seconds which indicates paring process is on going.
 If pairing succces, Blue LED will be solid on for 3 seconds.If paring fail, Red LED will be solid on for 3 seconds.
 If paring fail, press paring button for 5 second to restart paring process.
 The motion sensor needs to be checked and perform walk test annually to make sure the detection function is working

properly.

CAUTION:

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECTED TYPE. DISPOSE OF USED

BATTERIES ACCORDING TO THE INSTRUCTIONS.

Mounting Instruction

The recommended mounted position for a Motion Sensor should be 1.8M from the floor in the corner of a room. At this height, the
device can detect a movement up to 10M (±1M ) (see the following image). Also, in this position, the 90 degrees (±10 degree) fan­shaped detection pattern can normally offer greater protection than mounting on a flat wall.