SOHO MagicBox
Small Cell
Model: SRE4105T
Quick Installation Guide
Manufacture By:
Sercomm Corporation
8F, No. 3-1, YuanQu Street, Nankang,
Taipei 115, Taiwan, R.O.C.
Table of Contents
CHAPTER 1 INTRODUCTION .............................................................................................. 1
Package Contents .............................................................................................................. 1
Key Feature ........................................................................................................................ 1
LEDs ................................................................................................................................... 2
Front & Rear Panel ........................................................................................................... 3
CHAPTER 2 INITIAL INSTALLATION............................................................................... 4
Device Start up Procedure ................................................................................................ 4
CHAPTER 3 SPECIFICATIONS ............................................................................................ 5
General Specification ........................................................................................................ 5
RF Characteristics ............................................................................................................. 5
Regulatory Requirements ................................................................................................. 6
Safety Information............................................................................................................. 7
Device Surface Cleaning ................................................................................................... 9
Accessories ....................................................................................................................... 10
i
1
Chapter 1
Introduction
SOHO MagicBox is an indoor, self-configuring small cell device that will be used to ensure
Increased LTE Data Speeds using Sprint network and Increased LTE coverage at the customer
premises.
Package Contents
Package will include following items:
1 x SOHO MagicBox SRE4105T Device
1 x AD/DC Power Supply Adapter
If any of the above items are damaged or missing, please contact your dealer immediately.
Key Feature
• Designed for indoor/residential/Small Office Retention
• LTE Femto Cell Access up to 16 LTE active users
• 4T8R LTE UE-Relay with omni antenna for easy installation
• Support 4G TD-LTE Band 41 for Femto Cell access
• Support 4G TD-LTE Band 41 & Band 25 for LTE Backhaul
• 5 x LEDs status display and Info Button
• Support 3
• Internal LTE and GPS antennas
rd
party APP via Bluetooth Low Energy (BLE) 4.2
1
LEDs
SOHO MagicBox has 5 LED indicators: Power, GPS, Service(Relay), LTE(Femto), and Info.
Table below describes the definition of each of SOHO MagicBox LED:
LED Description Steady ON Blinking OFF
Power(Green) Device is Power On N/A Device is Off or No
power
GPS(Green) GPS Locked Trying to connect
and lock GPS
Service(Green) connected to donor
LTE(Green) LTE small cell ready
Info (bi-color:
Red /Green)
Successfully
to provide service
Reserved(TBD) Blinking Red,
satellite
Trying to connect
to donor
PnP process on
going
indicating device
encounter error or
issues; user will
push info button to
check Info status
GPS cannot lock
No Donor Signal
No LTE service to
user
No information for
user
2
Front & Rear Panel
Front Panel
Info Button
Power
Info Button for LED Status & Device Reset
Back Panel
Input: 12 Vdc, 2.5A, Power Jack to Power Adaptor
3
2
Chapter 2
Initial Installation
SRE4105T is designed for Plug-n-Play(PnP) and self-configure which not require any software
installation to use. When device power on the device, it will start scanning and search for valid
LTE backhaul donor eNB and begin the device Plug PnP and provision processes. The PnP
and provision process will take approximate 6~7 min. to bring up and activate the device
service.
Device Start up Procedure
4
3
Chapter 3
Specifications
General Specification
Connectivity - 12x Internal Antennas
- No wired connection
Power Supply External Power Adapter:
Input: AC100～240V~1.6A, 50Hz/60Hz, 0.9A Max.
Output: 12 Vdc, 2.5A
Operating Requirement Operating Temp. -5ºC to 40ºC
Storage Temp. -5ºC to 45ºC
Operating Humidity 5% to 90% Non-Condensing
Storage Humidity 5% to 95% Non-Condensing
Reset button Reset & Info Button
LED 5 LED for Status.
Housing 308mm(W)x192mm(H)x110mm(D)
RF Characteristics
LTE Access RF
LTE Backhaul RF
Bluetooth RF
Transceiver
Band
Technology
Tx Power(B41)
Transceiver
Band
Technology
TX Power(B41)
TX Power(B25)
MCU
QCA FTR8930
Band 41
2T2R MIMO
24dBm Max per chain (Conduced)
GCT GDM7243A+GRF7243A
Band 41,Band 25
4T8R(B41) 2T8R(B25)
23 dBm (B41) Max per chain (Conducted)
20 dBm (B25) Max per chain (Conducted)
TI CC2640
Technology
TX Power
Bluetooth Low Energy 4.2 SPP
4 dBm Max (Conducted)
5
Regulatory Requirements
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Operations in the 5.15-5.25GHz band are restricted t
Radiation Exposure Statement:
his equipment complies with FCC radiation exposure limits set forth for an uncontrolled
T
environment. This equipment should be installed and operated with minimum distance 25cm
between the radiator & your body.
o indoor usage only.
6
Safety Information
All instructions, warning and caution statements that accompany this equipment must be strictly
followed at all times to ensure its safe use. Observe all warning and caution symbols that are
fixed to this equipment. This electrical equipment is designed with the utmost care for the
safety of those who install and use it. However, when using this device, basic safety precautions
should always be followed to reduce the risk of fire and injury to persons, and the dangers of
electric shock and static electricity. Do not cover the device or block the airflow to the device
with any other objects. This product was qualified under test conditions that included the use of
the supplied cables between system components. To be in compliance with regulations, the user
must use the cables supplied with the unit and install them properly. This includes the power
adapter that is provided. Place the unit to allow for easy access when disconnecting the power
adapter from the mains wall outlet. Operate this product only with the type of power source
indicated on the marking label. If you are not sure of the type of power supplied to your home,
consult your dealer or local electricity company. Do not use this product near water, for example a swimming pool or a bathroom. Keep the device away from excessive heat and humidity
and keep the device free from vibration and dust. Wipe the unit with a clean, dry cloth. Never
use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced
air to remove dust. Avoid installing or using this product during an electrical storm. There may
be remote risk of electric shock from lightning. During a lightning storm for added protection
please unplug it from the wall outlet and disconnect all cables. This will prevent damage due to
lightning and power surges. For safety reasons, only authorized service technicians should open
the device. If the device is opened the warranty will become void. The device may affect
medical equipment and so please take account of any technology restrictions with this equipment. This device, like other radio devices, emits radio frequency electromagnetic energy, but
operates within the guidelines found in radio frequency safety standards and recommendations.
It is recommended that the minimum operating distance from the installed Access Point to
persons is 25cm.
General Hazard Statement
Safety notes are marked with symbols. Ignoring the safety notes may lead to personal injury,
damage to the instrument and malfunctions.
Signal Words identify the hazard severity level as follow:
Signal word Meaning
DANGER Indicates an extremely hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE Indicates a hazardous situation not related to personal injury.
Contact with energized parts can cause serious injury.
7
At least one other trained person must be in attendance, who can immediately and safely
disconnect the system if necessary.
This second person must be trained in first aid for emergency purposes
Some parts of all electrical installations are energized. Failure to follow safe work
Practices and the safety warnings may lead to bodily injury and property damage.
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 or EN 60215 + A1 or in the National Electrical Code or in ANSI/NFPA No. 10)
may install or service the installation.
Risk of electric shock
a) Do not open the AC adaptor housing. Make sure that the AC adapter does ot come in
contact with liquids.
b) Use Only the 3-pin power cord with equipment grounding conductor which was supplied
with your instrument and only on 3-pin grounded outlet must be used.
The Cooling vents at the right & left of the enclosure can become obstructed, preventing
ventilation of the enclosure.
Make sure that the air vent is not obstructed and remains clear at all times.
8
Device Surface Cleaning
You may clean the device case using a cloth dampened with mild liquid detergent (such
as Dawn) and water.
Always unplug/disconnect power before apply any cleaning to Device.
Warning Do not submerse the Device or its accessories in water or allow water to enter
into the case; this may lead to electrical shock and/or damage
9
Accessories
Item Description P/N
AC/DC Adapter (without power core)
AC100～240V~0.9A, 50Hz/60Hz auto switching, 12 V
DC, 2.5A
919252126AP
10
Loading...