Sercomm PS801H V2 Users Manual

Wireless USB Print Server User Guide

Home Installation Configuration Tutorials

Help

Introduction Warranty Copyright Regulatory

The Wireless USB Print Server can be used in any home or office network environment to share a USB printer via an Ethernet network or a wireless network. By using the USB Print Server to connect a USB printer to a wireless or Ethernet network device, such as a wireless router or a switch, the USB printer can be shared by each user on the network without having to tie up the resources of one computer to act as the dedicated print server.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/index.html (1 of 4)9/14/2006 4:31:22 PM

Wireless USB Print Server User Guide

System Requirements

● A computer with an Ethernet internet connection

● The Installation CD-ROM that came with your printer

● An HTML 4.01-compliant Web Browser (such as Internet Explorer 5.5 or later or

Netscape 8.0 or later) with JavaScript enabled

● Ethernet cable

● USB cable

Physical Features

LEDs

LED State Function

LAN

Solid

Ethernet LAN link is achieved.

Flashing

Sending or receiving LAN data.

Off Not connected to LAN.

WAN

Solid

Ethernet WAN link is achieved.

Flashing

Sending or receiving WAN data.

Off Not connected to WAN.

ACT

Flashing

Sending or receiving WAN data.

ERR

Solid

No printer connection is detected.

Off Printer is connected.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/index.html (2 of 4)9/14/2006 4:31:22 PM

Wireless USB Print Server User Guide

Back

Item Function

RESET

Restores your print server to the factory default setting, or prints a test page.

To restore your print server to the factory default settings:

1. Unplug the power adapter from the print server.

2. Press and hold the RESET button

3. Plug the power adapter back in to the print server.

4. Release the RESET button.

To print a status page:

● Press the RESET button once.

LAN

Connects the print server to your computer’s Ethernet adapter.

USB

Connects the print server to your computer’s USB adapter.

POWER

Connects your print server to the supplied power adapter.

R46.1414.00 rev 0.4 6/06

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/index.html (3 of 4)9/14/2006 4:31:22 PM

Wireless USB Print Server User Guide

Home Installation Configuration Tutorials

Help

Introduction Warranty Copyright Regulatory

U.S. Robotics Corporation Two (2) Year Limited Warranty

1.0 GENERAL TERMS:

1.1 This Limited Warranty is extended only to the original end-user purchaser (CUSTOMER) and is not transferable.

1.2 No agent, reseller, or business partner of U.S. Robotics Corporation (U.S. ROBOTICS) is authorised to modify the terms of this Limited Warranty on behalf of U. S. ROBOTICS.

1.3 This Limited Warranty expressly excludes any product that has not been purchased as new from U.S. ROBOTICS or its authorised reseller.

1.4 This Limited Warranty is only applicable in the country or territory where the product is intended for use (As indicated by the Product Model Number and any local telecommunication approval stickers affixed to the product).

1.5 U.S. ROBOTICS warrants to the CUSTOMER that this product will be free from defects in workmanship and materials, under normal use and service, for TWO (2) YEARS from the date of purchase from U.S. ROBOTICS or its authorised reseller.

1.6 U.S. ROBOTICS sole obligation under this warranty shall be, at U.S. ROBOTICS sole discretion, to repair the defective product or part with new or reconditioned parts; or to exchange the defective product or part with a new or reconditioned product or part that is the same or similar; or if neither of the two foregoing options is reasonably available, U.S. ROBOTICS may, at its sole discretion, provide a refund to the CUSTOMER not to exceed the latest published U.S. ROBOTICS recommended retail purchase price of the product, less any applicable service fees. All products or parts that are exchanged for replacement will become the property of U.S. ROBOTICS.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/warranty.html (1 of 6)9/14/2006 4:33:45 PM

Wireless USB Print Server User Guide

1.7 U.S. ROBOTICS warrants any replacement product or part for NINETY (90) DAYS from the date the product or part is shipped to Customer.

1.8 U.S. ROBOTICS makes no warranty or representation that this product will meet CUSTOMER requirements or work in combination with any hardware or software products provided by third parties.

1.9 U.S. ROBOTICS makes no warranty or representation that the operation of the software products provided with this product will be uninterrupted or error free, or that all defects in software products will be corrected.

1.10 U.S. ROBOTICS shall not be responsible for any software or other CUSTOMER data or information contained in or stored on this product.

2.0 CUSTOMER OBLIGATIONS:

2.1 CUSTOMER assumes full responsibility that this product meets CUSTOMER specifications and requirements.

2.2 CUSTOMER is specifically advised to make a backup copy of all software provided with this product.

2.3 CUSTOMER assumes full responsibility to properly install and configure this product and to ensure proper installation, configuration, operation and compatibility with the operating environment in which this product is to function.

2.4 CUSTOMER must furnish U.S. ROBOTICS a dated Proof of Purchase (copy of original purchase receipt from U.S. ROBOTICS or its authorised reseller) for any warranty claims to be authorised.

3.0 OBTAINING WARRANTY SERVICE:

3.1 CUSTOMER must contact U.S. ROBOTICS Technical Support or an authorised U.S. ROBOTICS Service Centre within the applicable warranty period to obtain warranty service authorisation.

3.2 Customer must provide Product Model Number, Product Serial Number and dated Proof of Purchase (copy of original purchase receipt from U.S. ROBOTICS or its authorised reseller) to obtain warranty service authorisation.

3.3 For information on how to contact U.S. ROBOTICS Technical Support or an

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/warranty.html (2 of 6)9/14/2006 4:33:45 PM

Wireless USB Print Server User Guide

authorised U.S. ROBOTICS Service Centre, please see the U.S ROBOTICS corporate Web site at: www.usr.com

3.4 CUSTOMER should have the following information / items readily available when contacting U.S. ROBOTICS Technical Support:

● Product Model Number

● Product Serial Number

● Dated Proof of Purchase

● CUSTOMER contact name & telephone number

● CUSTOMER Computer Operating System version

● U.S. ROBOTICS Installation CD-ROM

● U.S. ROBOTICS Installation Guide

4.0 WARRANTY REPLACEMENT:

4.1 In the event U.S. ROBOTICS Technical Support or its authorised U.S. ROBOTICS Service Centre determines the product or part has a malfunction or failure attributable directly to faulty workmanship and/or materials; and the product is within the TWO (2) YEAR warranty term; and the CUSTOMER will include a copy of the dated Proof of Purchase (original purchase receipt from U.S. ROBOTICS or its authorised reseller) with the product or part with the returned product or part, then U.S. ROBOTICS will issue CUSTOMER a Return Material Authorisation (RMA) and instructions for the return of the product to the authorised U.S. ROBOTICS Drop Zone.

4.2 Any product or part returned to U.S. ROBOTICS without an RMA issued by U.S. ROBOTICS or its authorised U.S. ROBOTICS Service Centre will be returned.

4.3 CUSTOMER agrees to pay shipping charges to return the product or part to the authorised U.S. ROBOTICS Return Centre; to insure the product or assume the risk of loss or damage which may occur in transit; and to use a shipping container equivalent to the original packaging.

4.4 Responsibility for loss or damage does not transfer to U.S. ROBOTICS until the returned product or part is received as an authorised return at an authorised U.S. ROBOTICS Return Centre.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/warranty.html (3 of 6)9/14/2006 4:33:45 PM

Wireless USB Print Server User Guide

4.5 Authorised CUSTOMER returns will be unpacked, visually inspected, and matched to the Product Model Number and Product Serial Number for which the RMA was authorised. The enclosed Proof of Purchase will be inspected for date of purchase and place of purchase. U.S. ROBOTICS may deny warranty service if visual inspection of the returned product or part does not match the CUSTOMER supplied information for which the RMA was issued.

4.6 Once a CUSTOMER return has been unpacked, visually inspected, and tested U.S. ROBOTICS will, at its sole discretion, repair or replace, using new or reconditioned product or parts, to whatever extent it deems necessary to restore the product or part to operating condition.

4.7 U.S. ROBOTICS will make reasonable effort to ship repaired or replaced product or part to CUSTOMER, at U.S. ROBOTICS expense, not later than TWENTY ONE (21) DAYS after U.S. ROBOTICS receives the authorised CUSTOMER return at an authorised U.S. ROBOTICS Return Centre.

4.8 U.S. ROBOTICS shall not be liable for any damages caused by delay in delivering or furnishing repaired or replaced product or part.

5.0 LIMITATIONS:

5.1 THIRD-PARTY SOFTWARE: This U.S. ROBOTICS product may include or be bundled with third-party software, the use of which is governed by separate end-user license agreements provided by third-party software vendors. This U.S. ROBOTICS Limited Warranty does not apply to such third-party software. For the applicable warranty refer to the end-user license agreement governing the use of such software.

5.2 DAMAGE DUE TO MISUSE, NEGLECT, NON-COMPLIANCE, IMPROPER INSTALLATION, AND/OR ENVIRONMENTAL FACTORS: To the extent permitted by applicable law, this U.S. ROBOTICS Limited Warranty does not apply to normal wear and tear; damage or loss of data due to interoperability with current and/or future versions of operating system or other current and/or future software and hardware; alterations (by persons other than U.S. ROBOTICS or authorised U.S. ROBOTICS Service Centres); damage caused by operator error or non-compliance with instructions as set out in the user documentation or other accompanying documentation; damage caused by acts of nature such as lightning, storms, floods, fires, and earthquakes, etc. Products evidencing the product serial number has been tampered with or removed; misuse, neglect, and improper handling; damage caused by undue physical, temperature, or electrical stress; counterfeit products; damage or loss of data caused by a computer virus, worm, Trojan horse, or memory content corruption; failures of the product which result from accident, abuse, misuse (including but not limited to improper installation, connection to incorrect voltages, and power points); failures caused by products not supplied by U.S. ROBOTICS;

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/warranty.html (4 of 6)9/14/2006 4:33:45 PM

Wireless USB Print Server User Guide

damage cause by moisture, corrosive environments, high voltage surges, shipping, abnormal working conditions; or the use of the product outside the borders of the country or territory intended for use (As indicated by the Product Model Number and any local telecommunication approval stickers affixed to the product).

5.3 TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. U.S. ROBOTICS NEITHER ASSUMES NOR AUTHORISES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, WARRANTY, OR USE OF ITS PRODUCTS.

5.4 LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, U.S. ROBOTICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF U.S. ROBOTICS OR ITS AUTHORISED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT U.S. ROBOTICS OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

6.0 DISCLAIMER:

Some countries, states, territories or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to CUSTOMER. When the implied warranties are not allowed by law to be excluded in their entirety, they will be limited to the TWO (2) YEAR duration of this written warranty. This warranty gives CUSTOMER specific legal rights, which may vary depending on local law.

7.0 GOVERNING LAW:

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/warranty.html (5 of 6)9/14/2006 4:33:45 PM

Wireless USB Print Server User Guide

This Limited Warranty shall be governed by the laws of the State of Illinois, U.S.A. excluding its conflicts of laws principles and excluding the United Nations Convention on Contracts for the International Sale of Goods.

U.S. Robotics Corporation 935 National Parkway Schaumburg, IL, 60173 U.S.A

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/warranty.html (6 of 6)9/14/2006 4:33:45 PM

Wireless USB Print Server User Guide

Home Installation Configuration Tutorials

Help

Introduction Warranty Copyright Regulatory

U.S. Robotics Corporation 935 National Parkway Schaumburg, Illinois 60173-5157 USA

No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as a translation, transformation, or adaptation) without written permission from U.S. Robotics Corporation. U.S. Robotics Corporation reserves the right to revise this documentation and to make changes in the products and/or content of this document from time to time without obligation to provide notification of such revision or change. U.S. Robotics Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please contact U.S. Robotics and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in U.S. Robotics standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.22714 (June 1987) whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/copyright.html (1 of 2)9/14/2006 4:34:14 PM

Wireless USB Print Server User Guide

in, or delivered to you in conjunction with, this Quick Installation Guide.

Copyright © 2006 U.S. Robotics Corporation. All rights reserved. U.S. Robotics and the U.S. Robotics logo are registered trademarks of U.S. Robotics Corporation. Other product names are for identification purposes only and may be trademarks of their respective companies. Product specifications subject to change without notice.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/copyright.html (2 of 2)9/14/2006 4:34:14 PM

Wireless USB Print Server User Guide

Home Installation Configuration Tutorials

Help

Introduction Warranty Copyright Regulatory

Regulatory Information

Manufacturer’s Declaration of Conformity

U.S. Robotics Corporation 935 National Parkway Schaumburg, IL 60173 U.S.A.

declares that this product conforms to the FCC’s specifications:

Part 15, Class B

Operation of this device is subject to the following conditions:

1) this device may not cause harmful electromagnetic interference, and

2) this device must accept any interference received including interference that may cause undesired operations.

This equipment complies with FCC Part 15 for Home and Office use.

Caution to the User: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/regulatory.html (1 of 6)9/14/2006 4:34:39 PM

Wireless USB Print Server User Guide

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

Radio and Television Interference: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the manufacturer’s instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

USR declares 5436 and 5436A are limited in CH1~11 from 2412 to 2462 MHz by specified firmware controlled in USA.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

UL Listing/CUL Listing:

This information technology equipment is UL Listed and C-UL Listed for both the US and Canadian markets respectively for the uses described in the User Guide. Use this product only with UL Listed Information Technology Equipment (ITE).

For Canadian Users

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/regulatory.html (2 of 6)9/14/2006 4:34:39 PM

Wireless USB Print Server User Guide

Industry Canada (IC)

This equipment complies with the Industry Canada Spectrum Management and Telecommunications policy, RSS-210, standard Low Power License-Exempt Radio Communication Devices.

Operation is subject to the following two conditions:

1. This device may cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding.

Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the Equivalent Isotropic Radiated Power (EIRP) is not more than that required for successful communication.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make electrical ground connections by themselves, but should contact the appropriate inspection authority or an electrician, as appropriate.

CE Compliance

Declaration of Conformity

We, U.S. Robotics Corporation of 935 National Parkway, Schaumburg, Illinois, 601735157 USA, declare under our sole responsibility that the products, U.S. Robotics Wireless USB Print Server, Models 5436 and 5436A, to which this declaration relates, are in conformity with the following standards and/or other normative documents.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/regulatory.html (3 of 6)9/14/2006 4:34:39 PM

Wireless USB Print Server User Guide

EN300 328 EN301 489-1 EN301 489-17 EN60950 EN61000-3-2 EN61000-3-3 EN50392

We, U.S. Robotics Corporation, hereby declare the above named product is in compliance and conformity with the essential requirements and other relevant provisions of Directive 1999/5/EC.

The conformity assessment procedure referred to in Article 10 and detailed in Annex IV of Directive 1999/5/EC has been followed.

This equipment is in compliance with the European recommendation 1999/519/ECC, governing the exposure to the electromagnetic radiation.

This product can be used in the following countries:

Germany, Austria, Belgium, Switzerland, Netherlands, Luxembourg, Italy, France, UK, Ireland, Spain, Portugal, Sweden, Norway, Denmark, Finland, Czech Republic, Poland, Hungary, and Greece

An electronic copy of the original CE Declaration of Conformity is available at the U.S. Robotics website:

www.usr.com

Regarding IEEE 802.11b/g frequencies, we currently have the following information about restrictions in the European Union (EU) countries:

● Italy: Please be aware that use of the wireless device is subject to the following

Italian regulation:

1. D.Lgs 1.8.2003, number 259, articles 104 (activities where General Authorization is required) and 105 (free use), for private use;

2. D.M 28.5.03 and later modifications, for the supplying to public RadioLAN access for networks and telecommunication services

● France

In France metropolitan, outdoor power is limited to 10mW (EIRP) within 2454MHz – 2483, 5MHz frequency band

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/regulatory.html (4 of 6)9/14/2006 4:34:39 PM

Wireless USB Print Server User Guide

In Guyana and Reunion Islands, outdoor use is forbidden within 2400MHz – 2420MHz frequency band

Regulatory Channel Frequency

Channel

Frequency

(MHz)

FCC Canada ETSI

1 2412

X X X

2 2417

X X X

3 2422

X X X

4 2427

X X X

5 2432

X X X

6 2437

X X X

7 2442

X X X

8 2447

X X X

9 2452

X X X

10 2457

X X X

11 2462

X X X

12 2467

13 2472

Operating Channels :

● IEEE 802.11g compliant

● 11 channels (US, Canada)

● 13 channels (ETSI)

EU Health Protection

This device complies with the European requirements governing exposure to

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/regulatory.html (5 of 6)9/14/2006 4:34:39 PM

Wireless USB Print Server User Guide

electromagnetic radiation. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This wireless device is a transmitter/receiver and has been designed and manufactured to comply with the exposure limits recommended by the Council of the European Union and the International Commission on Non-Ionizing Radiation Protection (ICNIRP, 1999) for the entire population. The exposure standard for portable equipment uses the "Specific Absorption Rate" as unit of measure. The maximum SAR value of this wireless device measured in the conformity test is 0.002 W/kg.

Go to

www.usr.com to see the most recent channel restriction information.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/regulatory.html (6 of 6)9/14/2006 4:34:39 PM

Wireless USB Print Server User Guide

Home Installation Configuration Tutorials Help

Wireless USB Print Server Installation Client Installation Macintosh Installation Unix

Installation Netware Installation Windows Server Installation

Step One: Connect the Wireless USB Print Server

Note: The Wireless USB Print Server must be connected using an Ethernet cable for the initial

configuration. After the initial configuration, you can establish a wireless connection to the network.

1. Turn on your printer.

2. Connect one end of the USB cable to the USB port on your printer, and connect the other end of the USB cable to the USB port on the Print Server.

3. Connect one end of an Ethernet cable to your wireless or wired router and the other end to the LAN port on the Print Server.

4. Slide the standard power plug for your country on to the power adapter. Apply enough pressure to cause a click and firmly seat the plug. The power adapter must be unplugged when you attach the plug.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (1 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

North America

Europe

5. Connect the included power adapter to the POWER port on the Wireless USB Print Server and plug the power adapter into a standard power outlet.

Step Two: Configure the Wireless USB Print Server

1. Verify you are logged on to your computer as an administrator. You must be logged on as an administrator to ensure the software will be properly installed.

2. Insert the U.S. Robotics Installation CD-ROM.

2. Click Setup Wizard and then click Next.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (2 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

3. The Wireless USB Print Server will be shown in the list. Select the print server in the list and click Next. If it does not appear in the list, check your physical connections and click Refresh.

4. You can change the Device Name, if you want, and enter a Domain Name. When finished,

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (3 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

click Next.

5. If you have connected the Wireless USB Print Server to a network device that has DHCP capabilities, you can select Obtain IP Address automatically. If your network device does not have DHCP capabilities, you can select Fixed IP Address and add the IP address information. When finished, click Next.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (4 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

6. Next you can select the Region or Domain where you will be using the Wireless USB Print Server.

7. You can then select your Network Type as either Infrastructure or Ad Hoc, depending on if you are using a wireless router or access point or not in your wireless network.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (5 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

Note: The Wireless USB Print Server is initially set in Infrastructure mode, which is

used to connect to an wireless router or access point. If you will be establishing a connection to other wireless clients without using a wireless router or access point, select Ad-hoc as the Network type.

8. In the SSID field, you should enter the SSID of the wireless router or access point to which you will be connecting the wireless print server. If you selected Ad Hoc for your Network Type, you can select a specific Channel on which to broadcast. If you selected Infrastructure, Auto is the only channel option. For Security, you can select either Disable, WEP, or

WPA-PSK,

depending on how you have your wireless network set up.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (6 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

Note: The only security that the print server supports is WEP or WPA-PSK. You may

need to modify the security settings of your wireless network accordingly.

A. If you select WEP, you will need to select either Open System or Shared Key for

your Authentication and then click Next.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (7 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

B. You will then need to select your WEP Key Length, either 64 bit Hex, 64 bits

ASCII, 12 bits Hex, or 128 bits ASCII. Click Next.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (8 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

C. You will then need to enter your Key and select the Default Key number. Click

Next when finished.

Hex ASCII

64-bit

10 characters 5 characters

128-bit

26 characters 13 characters

WEP Key: 64 bits (ASCII):

WEP Key: 64 bits (Hex):

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (9 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

WEP Key: 128 bits (ASCII):

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (10 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

WEP Key: 128 bits (Hex):

D. If you select WPA-PSK, you will need to enter the WPA Key on the next screen. This

Key should match what you already have in your wireless network.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (11 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

8. After selecting your Security type and entering any necessary information, your initial configuration is complete and you should click Finish.

9. You will then be prompted to install the PTP (Peer-to-Peer) driver. Click Yes and follow the on-

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (12 of 17)9/14/2006 4:35:10 PM

Wireless USB Print Server User Guide

screen instructions.

10. When that is completed, make sure the Configure Print Driver now checkbox is selected and click Finish.

11. Click OK in the Information screen that appears. It may be necessary to minimize the Print Server Utility screen in order to see the Information screen.

12. In the Printer Port Setup, select the port and click Next.

file:///G|/CSO/T-Writer Repository/Networking/5436A Wireless Gutenberg/User Guide/English/install.html (13 of 17)9/14/2006 4:35:10 PM

+ 73 hidden pages