Waterproof
HD IP Camera
Setup Guide
Document Version: 1.0
Copyright 2017. All Rights Reserved.
All trademarks and trade names are the properties of their respective
owners.
i
Package Contents
The following items should be included: If any of these items are
damaged or missing, please contact your service provider immediately.
1. Waterproof HD IP Camera x 1
2. Stand x 1
3. Screw Terminal Adapter x 1
4. Screw/Anchor x 2
5. DC In Rubber x 1
6. Rubber Cap x 1
7. DC Barrel Connector with Two Wire Flying Lead x 1
Chapter 1
Introduction
This Chapter provides details of the Waterproof HD IP
Camera's features, components and capabilities.
Overview
The Waterproof HD IP Camera has an Integrated Microcomputer and a
high quality Mega Pixel Omni Vision CMOS Sensor, enabling it to
display high quality live streaming video over your wired LAN, the
Internet, and for the Waterproof HD IP Camera, an 802.11N Wireless
LAN.
Using enhanced H.264 technologies, the Waterproof HD IP Camera is
able to stream high quality video and audio directly to your PC. The
high compression capabilities of H.264 reduce network bandwidth
requirements to amazingly low levels.
This weather-resistant camera, which with the IP66 rated housing and
internal heater, let you keep an eye on your belongings - even in harsh
environments. It is also an all-in-one camera that has automatic and
manual day/night switching, PIR sensor and built-in infrared LEDs,
which can provide illumination around 5 meters long under low light
conditions in a simple, economical manner.
Figure 1: Network Diagram - Waterproof HD IP Camera
1
Features
Standalone Design. The Waterproof HD IP Camera is a
standalone system with built-in CPU and Video encoder. It requires
only a power source and a connection to your LAN or Wireless LAN.
Dual Video Support. The Waterproof HD IP Camera can support
H.264 and MJEPG video for different image compression.
Suitable for Home, Business or Public Facilities. Whether for
Home, Business or Public Facility surveillance, or just for
entertainment and fun, the Waterproof HD IP Camera has the
features you need.
Day/Night Switch: With the day/night switching feature, you are
able to view and record better images even in the dark of night.
IR LEDs Support. Each Waterproof HD IP Camera has two infrared
LEDs. The LEDs can provide illumination around 5 meters long, that
can help to output a better video quality while under low-light
conditions such as on cloudy days, or in the morning or evening.
PIR (Passive Infrared Sensor) Support. The Waterproof HD IP
Camera is embedded with a PIR Sensor, which senses infrared light
radiating from human bodies in its field of view. This feature is very
helpful in enhancing home security systems.
Built-in Heater. The built-in Heater can support the camera to be
used in the extreme cold outdoor climate applications. The heater
should be turn on when temperature is below 6°C.
Micro-SD Card Slot. With the slot, you can insert the Micro-SD card
to store recording files.
Wireless Features
Supports 11n Wireless Stations. The 802.11n standard provides
for backward compatibility with the 802.11b standard, so 802.11n,
802.11b and 802.11g Wireless stations can be used simultaneously.
Wired and Wireless Network Support. The Waterproof HD IP
Camera supports either wired or wireless transmission.
WEP Support. Full WEP support (64/128 Bit) on the Wireless
interface is provided.
WPA/WPA2 Support. The WPA Personal/WPA2 Personal
standard is also supported, allowing advanced encryption of wireless
data.
WPS Support. WPS (Wi-Fi Protected Setup) can simplify the
process of connecting any device to the wireless network by using
the push button configuration (PBC) on the Waterproof HD IP
Camera, or entering a PIN code if there's no button.
2
This is hardware sensor to detect LUX.
No physical adjustment is required or possible for
the lens, but you should ensure that the lens
cover remains clean. The image quality is
degraded if the lens cover is dirty or smudged.
This is hardware sensor to detect motion.
Chapter 2
Basic Setup
This Chapter provides details on how to install and
configure the Waterproof HD IP Camera.
System Requirements
To use the Wireless interface on the wireless model, other Wireless
devices must be compliant with the IEEE802.11b, IEEE802.11g, or
IEEE802.11n specifications. All Wireless stations must use
compatible settings.
Physical Details - Waterproof HD IP Camera
Front Panel - Waterproof HD IP Camera
Figure 2: Front Panel
3