Sercomm NA502S Users Manual
NA502S
Multiple RF Home Gate-
way
User Guide
i
Table of Contents
CHAPTER 1 INTRODUCTION .............................................................................................. 1
Package Contents .............................................................................................................. 1
Features .............................................................................................................................. 1
LEDs ................................................................................................................................... 2
CHAPTER 2 INITIAL INSTALLATION............................................................................... 5
Requirements ..................................................................................................................... 5
Procedure ........................................................................................................................... 5
SIM Card Installation ....................................................................................................... 7
CHAPTER 3 CONFIGURATION ........................................................................................... 8
Configuration ..................................................................................................................... 8
APPENDIX A SPECIFICATIONS .......................................................................................... 9
Multiple RF Home Gateway ............................................................................................. 9
Regulatory Approvals ....................................................................................................... 9
Copyright 2016. All Rights Reserved.
Document Version: 1.2
All trademarks and trade names are the properties of their respective owners.
ii
1
Chapter 1
Introduction
This Chapter provides an overview of the Multiple RF Home Gateway's features and capabilities.
Congratulations on the purchase of your new Multiple RF Home Gateway. The Multiple RF
Home Gateway is a consumer electronic device, which is designed to bridge all appliances of
your home, from IP cameras to sensors, and allow you to monitor and manage them over the
Internet. Most of the devices can be paired with the gateway via a single button push.
Package Contents
The following items should be included:
Multiple RF Home Gateway Unit x 1
Power Adapter x 1
If any of the above items are damaged or missing, please contact your dealer immediately.
Features
MT7621S processor with128MB Flash and 512MB RAM
One 10/100/1000 Ethernet port with RJ45 connector
Front Panel LEDs
Z-Wave Transceiver
ZigBee Transceiver
Bluetooth Transceiver
3G Wireless
USB 2.0 port
Battery Backup (2~4 hours)
SIM Card Slot
Built-in Siren
Two-way Voice
Internal antenna for WiFi, ZigBee, Z-Wave, Bluetooth, 433/345 and 3G
1
POWER (Green)
On - Power On/Normal Operation
Off - Power Off
Flashing - Rebooting.
WiFi
(Green)
On - WPS mode is selected.
On (5 seconds) - WiFi connection is established.
Off - No WiFi connection available.
Flashing - Data is being transmitted or received via the Wireless
connection.
Z-Wave
(Green)
On - Z-Wave mode is selected.
On (5 seconds) - Z-Wave sensor added or synchronization is
successful.
Off - Z-Wave module is in idle mode.
Flashing - Z-Wave module is in active mode.
ZigBee
(Green)
On - ZigBee mode is selected.
On (5 seconds) - ZigBee sensor added or synchronization is
successful.
Off - ZigBee module is in idle mode.
Flashing - ZigBee module is in active mode.
Bluetooth LE
On - Bluetooth mode is selected.
LEDs
Front Panel
The Multiple RF Home Gateway has 9 LEDs.
2
Loading...