Sercomm NA403 User Manual
NA403
Home Monitoring
Gateway
User Guide
Table of Contents
CHAPTER 1 INTRODUCTION .............................................................................................1
Package Contents .............................................................................................................. 1
Features..............................................................................................................................1
LEDs...................................................................................................................................2
CHAPTER 2 INITIAL INSTALLATION..............................................................................4
Requirements.....................................................................................................................4
Procedure...........................................................................................................................4
CHAPTER 3 BOARD DESCRIPTION..................................................................................6
Overview ............................................................................................................................6
Components and connectors ............................................................................................6
Router/AP configuration ..................................................................................................9
Regulatory Approvals.....................................................................................................10
Copyright © 2010. All Rights Reserved.
Document Version: 1.0
All trademarks and trade names are the properties of their respective owners.
i
Chapter 1
Introduction
1
This Chapter provides an overview of the Home Monitoring Gateway's features and capabilities.
Congratulations on the purchase of your new Home Monitoring Gateway. The Home
Monitoring Gateway is a consumer electronic device, which is used for home monitoring and
security.
Package Contents
The following items should be included:
• The Home Monitoring Gateway Unit
• Power Adapter
• A Stand
If any of the above items are damaged or missing, please contact your dealer immediately.
Features
• BCM5354 processor with16MB Flash and 32MB SDRAM
• Two Ethernet ports with RJ45 connectors.
• Front Panel LEDs
• Zigbee Transceiver
• Two USB 2.0 ports
• WPS button
• Reset button
• Power In connector
• Internal antenna for WiFi and Zigbee
1
LEDs
Front-mounted LEDs
The Home Monitoring Gateway has 8 LEDs.
POWER
• On (Green)- Power On
• Off - Power Off
• On (Amber) - POST (power on self test) failure or device malfunc-
tion
ETH (1~2)
(Green)
WiFi
Zigbee
USB (1~2)
Service
• On (Green)- LAN connection established.
• Off - No active connection on the corresponding LAN port.
• Flashing - Data is being transmitted or received via the
corresponding LAN (hub) port.
• On - Wireless connection available
• Off - No Wireless connection available.
• Flashing - Data is being transmitted or received via the Wireless
connection.
• On - Zigbee function enabled.
• Off - Zigbee function disabled.
• On (Green)- USB connection established.
• Off - No active connection on the corresponding USB port.
• Flashing - Data is being transmitted or received via the
corresponding USB port.
• On (Green)- Control Point has made a successful activation to the
Portal Server.
• Off - No active connection to the Portal Server.
• Flashing - Attempting to establish a connection to the Portal
Server.
2
Loading...