Sepura STP9080, STP9280 QS guide

Quick Reference Guide STP9000/9100/9200

sepura

Missed Event
Notification LED

Sepura plc
Radio House, St Andrew’s Road,
Cambridge, CB4 1GR England
www.sepura.com

SPR-DOC-03037 Issue 2
© Sepura plc 2013

Emergency

Key

Antenna

Facility Connector

Earpiece
and top
Microphone

Missed Event
Soft Key

Rugged
Accessory
Connector

Red Cancel / Home
key (Press and hold
for Home)

Bottom

Microphone

Speaker behind
keypad

STP9000

Navi-knob™

Status LED

On/Off and

Mode key

Side Soft Key
PTT

2 Context
Keys

4 way
Navigation
Keys

Green Select
Key

Keypad and press
and hold Soft keys

STP9200

For the STP9200, the two
keys labelled as context
keys are programmable
soft keys.

Keys I, II, III are
programmable soft keys

Please use the Green
and Red keys to select
and cancel functions

Variations

STP9100

For the STP9100, please
refer to the STP9000
image, but note that the
0-9, * and # keys are not
present

Switching On

Press and release the Mode Key.

Switching Off

Press & Hold the Mode Key until instructed to release.

Volume Adjust

Rotate the Navi-knob™.

Emergency Call

Press and hold the Emergency Key.

Changing current
Talkgroup

Press Mode Key once, rotate the Navi-knob™ to choose from
list of talkgroups in current folder. Wait 3-4 seconds or press
the PTT to select new talkgroup.

Changing current
Folder

Talk-groups are held in a folder. To Change the current folder
press the Mode Key once, then use the Navigation Keys to
select the required talkgroup folder. Change the talkgroup as
explained above.

Initiate a
Talkgroup Call

Press the PTT (top mic and speaker active ).

Initiate an
Individual radio
call

Key in radio number and select (use Up/Down
Navigation Keys), or select the radio number from Phonebook,
and press PTT to start half duplex call (top mic and speaker
active ) or Green Key to start full duplex call (bottom mic and
earpiece active).

Initiate a
Telephone Call

Key in telephone number and select (use Up/Down
Navigation Keys), or select the number from Phonebook, and
press appropriate Context Key or Green Key to start call
(bottom mic and earpiece active). To end call, press the other
Context Key or Red key.

Send Status

Press Mode Key twice, then rotate the Navi Knob™ to select a
status value. Press PTT twice to send to currently active
talkgroup. Status messages can also be accessed from the
menu structure.

Menu Access

Press the Menu Context key or press the Down Navigation
key

Menu navigation

Use the Navigation keys

Menu selection

Press the Select Context key or press Green key

Menu exit

Press and hold the Red key to return to the top level screen
‘Home.’ Pressing the Up navigation key or Back context key
will take you back up one menu level

Activating a Soft
key function

Press and hold a programmed soft key, this could be any of
the 0-9, * and # keys. The side soft key and missed event soft
key functions are activated by a simple press and release

SDS text entry
modes

Press the * key to toggle text input modes from Auto­Capitalisation to lower case, upper case and number entry