Sentry360 IS-IP200-IRB, IS-IP220-IRB-30 Quick Manual

No Cable Pin Definition Remarks

1 Network (with PoE) - RJ-45 connector with LED
2

Power

(3-pin Terminal Block)

1 AC 24V-1 DC (-)

Power connection

2 GND Reserved
3 AC 24V-2 DC (+)

3

Alarm

(4-pin Terminal Block)

1

ALM_DI－

Alarm connection

2

ALM_DI＋

3

ALM_DO－

4

ALM_DO＋

4

Audio I/O

Pink Line In/ Mic In

Two-way audio transmission

Green Line Out

5 BNC - Analog Video Output

IS-IP200-IRB/IS-IP220-IRB-30 Quick Guide

The quick guide is for quick installing and connecting the Full HD Multiple Streams IR Bullet IS-IP200-IRB/IS-IP220­IRB-30. For details, please refer to the camera’s User Manual.

Cable Definition

NOTE: Check the status of the link indicator and activity indicator LEDs; if the LEDs are unlit, please check

LAN connection.

Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.

Before Login to the IS-IP200-

IRB/IS-IP220-IRB-30

A client program will be automatically installed on your PC when connecting to the IS-IP200-IRB/IS-IP220-IRB-30.
Before logging in to the IS-IP200-IRB/IS-IP220-IRB-30, please ensure downloading the ActiveX control is allowed by
either changing the ActiveX controls and plug-ins or setting Internet’s security level to default. For further details,
please refer to the IS-IP200-IRB/IS-IP220-IRB-30’s user manual.

ActiveX Controls and Plug-ins Settings Internet Security Level

Step 1: Start the Internet Explorer (IE).
Step 2: Select <Tools> from the main menu of the

browser. Then Click on <Internet Options>.

Step 3: Click on the <Security> tab and select

“Internet”, and click on <Custom level> to
change ActiveX settings.

Step 4: Set “ActiveX controls and plug-ins” items to

<Prompt> or <Enable>.

Step 1: Start the IE.
Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

“Internet.”

Step 4: Down the page, click on “Default Level” and

“OK” to confirm the setting. Close the
browser window, and open a new one later for
accessing the IS-IP200-IRB/IS-IP220-IRB-30

IS-IP200-IRB/IS-IP220-IRB-30 Login

The IS-IP200-IRB/IS-IP220-IRB-30’s default IP address is: 192.168.0.250. Therefore, to access the IS-IP200-IRB/IS­IP220-IRB-30 for the first time, set the PC’s IP address as: 192.168.0.XXX; for example:

IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0

IS-IP200-IRB/IS-IP220-IRB-30 Installation

Please follow the instructions below to complete IS-IP200-IRB/IS-IP220­IRB-30 installation.

Power up the Camera
To power up the IS-IP200-IRB/IS-IP220-IRB-30, please plug the DC 12V/ AC 24V cable into the Camera’s power
terminal block. Alternatively, connect the Ethernet cable to the camera’s PoE port and plug the other end of the cable
into a PoE switch.

NOTE: If using PoE, make sure Power Sourcing Equipment (PSE) is in use in the network.

Ethernet Cable Connection
Connect one end of the CAT5 Ethernet cable to the RJ-45 connector of the IS-IP200-IRB/IS-IP220-IRB-30, and the
other end of the cable to the network switch or PC.

NOTE: In some cases, you may need to use an Ethernet crossover cable when connecting the IS-IP200­IRB/IS-IP220-IRB-30 directly to the PC.

Login ID & Password

•

Key in the IS-IP200-IRB/IS-IP220-IRB-30’s IP address in the URL bar of the Web browser window and click on

“Enter.”

•

Enter the default user name (Admin) and password (1234) in the prompt request dialogue. Note that user name is
case sensitive.

Install the ActiveX control

•

After connecting to the IS-IP200-IRB/IS-IP220-IRB-30, the request for installing the ActiveX control will appear just

below the URL bar.

•

Right click on the information bar, and click on “Install ActiveX Control…” to permit ActiveX control installation.

•

In the pop-up security warning window, click on “Install” to start downloading DC Viewer software on the PC.

•

Click on “Finish” after DC Viewer installation is complete.

Browser-based Viewer

The main page of the IS-IP200-IRB/IS-IP220-IRB-30 user interface is as shown below. Please note that the function
buttons will vary depending on the camera model.

Full HD Multiple Steams IR Bullet IS-IP200-

IRB/IS-IP220-IRB-30

Quick Guide

Ver1.3

00P5NX053ZXSEA3